Add a simple handshake with the lxc_controller process so we can detect
process startup failures. We do this by adding a new --handshake cli arg
to lxc_controller for passing a file descriptor. If the process fails to
launch, we scrape all output from the logfile and report it to the user.

We will reuse these shortly, and each use should have a different error
message.

These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.

How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.

example: origin				after CPP
	high_level_api("%d", a_int)	low_level_api("%d", a_int)
	high_level_api("a  string")	low_level_api("a  string")

About 400 conversions.

8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
  (for security) 6 conversions
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

LXC driver doesn't support vcpu affinity yet, so just need
to modify it to support cpu shares.

* Correct the documentation for cgroup: the swap_hard_limit indicates
  mem+swap_hard_limit.
* Change cgroup private apis to: virCgroupGet/SetMemSwapHardLimit
Signed-off-by: NNikunj A. Dadhania <nikunj@linux.vnet.ibm.com>

The current LXC I/O controller looks for HUP to detect
when a guest has quit. This isn't reliable as during
initial bootup it is possible that 'init' will close
the console and let mingetty re-open it. The shutdown
of containers was also flakey because it only killed
the libvirt I/O controller and expected container
processes to gracefully follow.

Change the I/O controller such that when it see HUP
or an I/O error, it uses kill($PID, 0) to see if the
process has really quit.

Change the container shutdown sequence to use the
virCgroupKillPainfully function to ensure every
really goes away

This change makes the use of the 'cpu', 'devices'
and 'memory' cgroups controllers compulsory with
LXC

* docs/drvlxc.html.in: Document that certain cgroups
  controllers are now mandatory
* src/lxc/lxc_controller.c: Check if PID is still
  alive before quitting on I/O error/HUP
* src/lxc/lxc_driver.c: Use virCgroupKillPainfully

Adding audit points showed that we were granting too much privilege
to qemu; it should not need any mknod rights to recreate any
devices.  On the other hand, lxc should have all device privileges.
The solution is adding a flag parameter.

This also lets us restrict write access to read-only disks.

* src/util/cgroup.h (virCgroup*Device*): Adjust prototypes.
* src/util/cgroup.c (virCgroupAllowDevice)
(virCgroupAllowDeviceMajor, virCgroupAllowDevicePath)
(virCgroupDenyDevice, virCgroupDenyDeviceMajor)
(virCgroupDenyDevicePath): Add parameter.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update clients.
* src/lxc/lxc_controller.c (lxcSetContainerResources): Likewise.
* src/qemu/qemu_cgroup.c: Likewise.
(qemuSetupDiskPathAllow): Also, honor read-only disks.

Using the 'personality(2)' system call, we can make a container
on an x86_64 host appear to be i686. Likewise for most other
Linux 64bit arches.

* src/lxc/lxc_conf.c: Fill in 32bit capabilities for x86_64 hosts
* src/lxc/lxc_container.h, src/lxc/lxc_container.c: Add API to
  check if an arch has a 32bit alternative
* src/lxc/lxc_controller.c: Set the process personality when
  starting guest

Normal practice for /dev/pts is to have it mode=620,gid=5
but LXC was leaving mode=000,gid=0 preventing unprivilegd
users in the guest use of PTYs

* src/lxc/lxc_controller.c: Fix /dev/pts setup

Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'

followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.

* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.

LXC Blkio weight configuration support.
Reviewed-by: N"Nikunj A. Dadhania" <nikunj@linux.vnet.ibm.com>
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>

Per the gettext developer:
http://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00019.html
http://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00021.html

gettext() doesn't work correctly on all platforms unless you have
called setlocale().  Furthermore, gnulib's gettext.h has provisions
for setting up a default locale, which is the preferred method for
libraries to use gettext without having to call textdomain() and
override the main program's default domain (virInitialize already
calls bindtextdomain(), but this is insufficient without the
setlocale() added in this patch; and a redundant bindtextdomain()
in this patch doesn't hurt, but serves as a good example for other
packages that need to bind a second translation domain).

This patch is needed to silence a new gnulib 'make syntax-check'
rule in the next patch.

* daemon/libvirtd.c (main): Setup locale and gettext.
* src/lxc/lxc_controller.c (main): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/storage/parthelper.c (main): Likewise.
* tools/virsh.c (main): Fix exit status.
* src/internal.h (DEFAULT_TEXT_DOMAIN): Define, for gettext.h.
(_): Simplify definition accordingly.
* po/POTFILES.in: Add src/storage/parthelper.c.

The /dev/console device inside the container must NOT map
to the real /dev/console device node, since this allows the
container control over the current host console. A fun side
effect of this is that starting a container containing a
real Fedora OS will kill off your X server.

Remove the /dev/console node, and replace it with a symlink
to the primary console TTY

* src/lxc/lxc_container.c: Replace /dev/console with a
  symlink to /dev/pty/0
* src/lxc/lxc_controller.c: Remove /dev/console from cgroups
  ACL

Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.

Debian stock kernel has CONFIG_CGROUP_MEM_RES_CTLR disabled due to the
overhead [1]. Allow to start containers if the corresponding files in
the cgroup filesystem are missing. This fixes Debian bug #566180 [2].

[1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=534964
[2] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=566180

libvirt-lxc now configures the hardlimit, softlimit and swaplimit, if
specified in the domain xml file or picks up the defaults.

Adding parsing code for memory tunables in the domain xml file
also change the internal define structures used for domain memory
informations
Adds a new specific test

Previously, the functions in src/lxc/veth.c could sometimes return
positive values on failure rather than -1. This made accurate error
reporting difficult, and led to one failure to catch an error in a
calling function.

This patch makes all the functions in veth.c consistently return 0 on
success, and -1 on failure. It also fixes up the callers to the veth.c
functions where necessary.

Note that this patch may be related to the bug:

  https://bugzilla.redhat.com/show_bug.cgi?id=607496.

It will not fix the bug, but should unveil what happens.

* po/POTFILES.in - add veth.c, which previously had no translatable strings
* src/lxc/lxc_controller.c
* src/lxc/lxc_container.c
* src/lxc/lxc_driver.c    - fixup callers to veth.c, and remove error logs,
                            as they are now done in veth.c
* src/lxc/veth.c - make all functions consistently return -1 on error.
* src/lxc/veth.h - use ATTRIBUTE_NONNULL to protect against NULL args.

Init process may remain after sending SIGTERM for some reason.
For example, if original init program is used, it is definitely
not killed by SIGTERM.

* src/lxc/lxc_controller.c: kill with SIGKILL if SIGTERM wasn't
  sufficient

The message is actually not of error but of debugging.
02:22:56.091: error : lxcControllerMain:316 : monitor=3 client=4 appPty=19 contPty=7

Run this:
  git grep -l 'VIR_ERROR\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR)\s*\((".*?"),/$1(_($2),/'

* src/lxc/lxc_controller.c (ignorable_epoll_accept_errno): New function.
(lxcControllerMain): Handle a failed accept carefully:
most errno values indicate legitimate failure and must be fatal.
However, ignore a special case: that in which an incoming client quits
between the poll() indicating its presence, and our accept() which
is trying to process it.

Approximately 60 messages were marked.  Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052

Run this command:
  git grep -l VIR_WARN|xargs perl -pi -e \
    's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

When using the 'ns' cgroup controller, the moment a process calls
'unshare(CLONE_NEWNS)', it will be given a private cgroup tree
under its current location. This really messages up the LXC
controller process, because it ends up creating the containers'
cgroup in the wrong place. The fix is fairly easy, just move
the cgroup setup before the code which calls unshare(). The
'ns' controller will still create extra undesired cgroups, but
they at least won't break libvirt's setup now.

The patch also adds a missing cgroups allow rule for /dev/tty
device node

* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c
  src/network/bridge_driver.c src/qemu/qemu_driver.c
  src/uml/uml_driver.c: virFileMakePath returns 0 for success, or the
  value of errno on failure, so error checking should be to test
  if non-zero, not if lower than 0

* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c
  src/lxc/lxc_controller.c src/node_device/node_device_hal.c
  src/openvz/openvz_conf.c src/qemu/qemu_driver.c
  src/qemu/qemu_monitor_text.c src/remote/remote_driver.c
  src/storage/storage_backend_disk.c src/storage/storage_driver.c
  src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c
  src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code
  review and those are the fixes correcting the problems

* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c
  src/lxc/veth.c: most of cleanups are just capitalizing their messages
  though, some fixes wrong error messages and awkward indentations, and
  improves error messages.

* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c
  src/lxc/veth.c: fix broken function comments

* src/lxc/lxc_driver.c src/lxc/lxc_controller.c: before launching the
  lxc controller, have the lxc driver query the log settings and setup
  envp[]. This provides the advantage of honoring the actual log
  configuration instead of only what had been set in the environment.
  The lxc controller now simply has to call virLogSetFromEnv().

Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string.  If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL.  Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string.  This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

* src/lxc_conf.c, src/lxc_conf.h, src/lxc_container.c,
  src/lxc_container.h, src/lxc_controller.c, src/lxc_driver.c,
  src/lxc_driver.h, src/veth.c, src/veth.h: Move to src/lxc/
* src/opennebula/one_driver.c: Remove bogus veth.h include
* src/Makefile.am: Adjust for lxc paths
* daemon/qemud.c: Adjust include for lxc

* src/lxc_controller.c (main): Unlink sockpath only if it's non-NULL.

* src/lxc_controller.c: Don't throw error in LXC startup if
  the cgroups driver mount isn't available. Improve error
  logging for resource setup

Allow the driver level cgroup to be managed explicitly by the
hypervisor drivers, in order to detect whether to enable or
disable cgroup support for domains. Provides better error
reporting of failures. Also allow for creation of cgroups for
unprivileged drivers if controller is accessible by the user.

* src/cgroup.c, src/cgroup.h: Add an API to obtain a driver cgroup
* src/lxc_conf.h, src/lxc_controller.c, src/lxc_driver.c:
  Obtain a driver cgroup at startup and use that instead of
  re-creating everytime.
* src/util.c, src/util.h, src/libvirt_private.syms: Add a
  virGetUserName() helper