All occurences of the former use fromConfig=true, and that's exactly
how virDomainPCIAddressReserveSlot() calls
virDomainPCIaddressReserveAddr(), so just use *Slot() so that *Addr()
can be made static to conf/domain_addr.c (both functions will be
renamed in upcoming patches).

Since we don't actually reserve an entire slot at a time anymore, the
name of this function is just confusing, and it's almost identical in
operation to virDomainPCIAddressReserveNextAddr() anyway, so remove
the *Slot() function and replace calls to it with calls to *Addr(...,
-1).

With the advent of VIR_PCI_CONNECT_AGGREGATE_SLOT, the new name is
more appropriate, since the address returned may be another address
on the same slot as last time, not necessarily a new slot.

fromConfig should be true if the caller wants
virDomainPCIAddressValidate() to loosen restrictions on its
interpretation of the pciConnectFlags. In particular, either
PCI_DEVICE or PCIE_DEVICE will be counted as equivalent to both, and
HOTPLUG will be ignored. In a few cases where libvirt was manually
overriding automatic address assignment, it was setting fromConfig to
false when validating the hardcoded manual override. This patch
changes those to fromConfig=true as a preemptive strike against any
future bugs that might otherwise surface.

Although setting virDomainPCIAddressReserveAddr()'s fromConfig=true is
correct when a PCI addres is coming from a domain's config, the *true*
purpose of the fromConfig argument is to lower restrictions on what
kind of device can plug into what kind of controller - if fromConfig
is true, then a PCIE_DEVICE can plug into a slot that is marked as
only compatible with PCI_DEVICE (and vice versa), and the HOTPLUG flag
is ignored.

For a long time there have been several calls to
virDomainPCIAddressReserveAddr() that have fromConfig incorrectly set
to false - it's correct that the addresses aren't coming from user
config, but they are coming from hardcoded exceptions in libvirt that
should, if anything, pay *even less* attention to following the
pciConnectFlags (under the assumption that the libvirt programmer knew
what they were doing).

See commit b87703cf for an example of an actual bug caused by the
incorrect setting of the "fromConfig" argument to
virDomainPCIAddressReserveAddr(). Although they haven't resulted in
any reported bugs, this patch corrects all the other incorrect
settings of fromConfig in calls to virDomainPCIAddressReserveAddr().

Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so
that they will be assigned to all the functions on a slot.

Some qemu test case outputs had to be adjusted due to the
pcie-root-ports now being put on multiple functions.

If a PCI device has VIR_PCI_CONNECT_AGGREGATE_SLOT set in its
pciConnectFlags, then during address assignment we allow multiple
instances of this type of device to be auto-assigned to multiple
functions on the same device. A slot is used for aggregating multiple
devices only if the first device assigned to that slot had
VIR_PCI_CONNECT_AGGREGATE_SLOT set. but any device types that have
AGGREGATE_SLOT set might be mix/matched on the same slot.

(NB: libvirt should never set the AGGREGATE_SLOT flag for a device
type that might need to be hotplugged. Currently it is only planned
for pcie-root-port and possibly other PCI controller types, and none
of those are hotpluggable anyway)

There aren't yet any devices that use this flag. That will be in a
later patch.

If there are multiple devices assigned to the different functions of a
single PCI slot, they will not work properly if the device at function
0 doesn't have its "multi" attribute turned on, so it makes sense for
libvirt to turn it on during PCI address assignment. Setting multi
then assures that the new setting is stored in the config (so it will
be used next time the domain is started), preventing any potential
problems in the case that a future change in the configuration
eliminates the devices on all non-0 functions (multi will still be set
for function 0 even though it is the only function in use on the slot,
which has no useful purpose, but also doesn't cause any problems).

(NB: If we were to instead just decide on the setting for
multifunction at runtime, a later removal of the non-0 functions of a
slot would result in a silent change in the guest ABI for the
remaining device on function 0 (although it may seem like an
inconsequential guest ABI change, it *is* a guest ABI change to turn
off the multi bit).)

This utility function iterates through all devices looking for any
with a PCI address that has function != 0 (which implies that multiple
functions are in use on that slot), then uses an inner iterator to
find the device that's on function 0 of that same slot and sets the
"multi" in its virDomainDeviceInfo (as long as it hasn't already been
set explicitly by someone who presumably has better information than
we do).

It isn't yet called from anywhere, so will have no functional effect.

There is a very slight time advantage to beginning the search for the
next unused PCI address at the slot *after* the previous find (which
is now used), but if we do that, we will miss allocating the other
functions of the same slot (when we implement a
VIR_PCI_CONNECT_AGGREGATE_SLOT flag to support that).

virDomainPCIAddressGetNextSlot() starts searching from the last
allocated address and goes to the end of all the buses, then goes back
to the first bus and searches from there up to the starting point (in
case any address has been freed since the last time an address was
allocated. The loops for these two are almost, but not exactly, the
same, so they have remained as separate loops with the same code
inside the loop. To lessen maintenance headaches, the identical code
has been moved out into the function
virDomainPCIAddressFindUnusedFunctionOnBus(), which is called in place
of the loop contents.

setting reserveEntireSlot really accomplishes nothing - instead of
going to the trouble of computing the value for reserveEntireSlot and
then possibly setting *all* functions of the slot as in-use, we can
just set the in-use bit only for the specific function being used by a
device.  Later we will know from the context (the PCI connect flags,
and whether we are reserving a specific address or asking for "the
next available") whether or not it is okay to allocate other functions
on the same slot.

Although it's not used yet, we allow specifying "-1" for the function
number when looking for the "next available slot" - this is going to
end up meaning "return the lowest available function in the slot, but
since we currently only provide a function from an otherwise unused
slot, "-1" ends up meaning "0".

When keeping track of which functions of which slots are allocated, we
will need to have more information than just the current bitmap with a
bit for each function that is currently stored for each slot in a
virDomainPCIAddressBus. To prepare for adding more per-slot info, this
patch changes "uint8_t slots" into "virDomainPCIAddressSlot slot", which
currently has a single member named "functions" that serves the same
purpose previously served directly by "slots".

libxl doesn't provide a way to write one log for each domain. Thus
we need to demux the messages. If our logger doesn't know to which
domain to attribute a message, then it will write it to the default
log file.

Starting with Xen 4.9 (commit f9858025 and following), libxl will
write the domain ID in an easy to grab manner. The logger introduced
by this commit will use it to demux the libxl log messages.

Thanks to the default log file, this logger will also work with older
versions of Xen.

By default, pool-info will convert sizes to human friendly units.

This patch will introduce option [--bytes].
If specified, the raw sizes will be in the output.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

* remove _vboxIID_v2_x and _vboxIID_v3_x structs and repalce with one
  _vboxIID as all supprted vbox versions have the same IID structure.
* remove vboxIIDUnion that was used to abstract version depended IID
  differences.
* remove IID_MEMBER macro and use the new vboxIID directly.

This function was not implemented for vbox 5+ which removed
TakeScreenShotPNGToArray but provides TakeScreenShotToArray with
BitmapFormat_PNG argument which is the same thing.

The IVRDxServer was used because vbox < 4 used to have IVRDPServer
whereas vbox >= 4 has IVRDEServer. Now that support for legacy
versions is being removed, we can use IVRDEServer.

* removed oldMediumInterface flag and related code that was used for
  vbox 2.x
* remove accelerate2DVideo and networkRemoveInterface flags which were
  also conditionals for handling legacy vbox versions.

this was implemented only for vbox 3 series and was mostly stubs
anyway.

* the getMachineForSession is always true for 4.0+. This also means that
  checkflag argument in openSessionForMachine no longer has any meaning
  because it was or'ed with getMachineForSession (always true)
* remove supportScreenshot flag - vbox 4.0+ supports it
* remove detachDevicesExplicitly flag only relevant for < 4.0

VirtualBox 4.0+ uses IMedium and IHardDisk is no longer used, so

* remove typef IMedium IHardDisk
* merge UIHardDisk into UIMedium
* update all references accordingly

and fold vboxAttachDrivesNew into vboxAttachDrives

This removes most of the code wrapped in VBOX_API_VERSION < 4000000
preprocessor checks. Those are the ones that can be safely removed
without needing to update driver code to accomodate it.

That is, for versions older than 4.0. Also do not try to include
headers for those old versions.

* delete SDK header files for vbox older than 4.0
* delete .c files for vbox older than 4.0
* update vbox_XPCOMCGlue to use oldest supported header file, that is 4.0
  going forward.
* remove deleted files from Makefile.am

Among other recent changes, this includes a workaround to avoid
Clang compiler bug https://llvm.org/bugs/show_bug.cgi?id=16404
having spurious link failures.

* .gnulib: Update.
* bootstrap: Synchronize to upstream.
Signed-off-by: NEric Blake <eblake@redhat.com>

Now that we have built a fairly solid process for dealing with
release notes, we should start pushing for contributors to
provide the relevant information along with their code:
documenting the process is clearly a requirement for this to
happen.

Instead of encoding formatting information inside the
corresponding XSLT stylesheet, use a Python script to reformat
the text appropriately based on a few simple markers.

Splitting the task between the XSLT stylesheet and the Python
script allows us to keep both parts very simple.

Currently, building the NEWS file involves using a XSLT stylesheet
to extract information from the same HTML file that's used on the
libvirt website.

The process works, but it's quite fiddly in that it requires the
source HTML to be formatted in a very precise way, and a single
missing newline can mess up the resulting plain text considerably.

Moreover, the XSLT stylesheet itself encodes a lot of the details
of converting to plain text in a way that's not necessarily easy
to understand, tweak or fix.

To improve the process, move all existing entries to a new XML
file that contains exactly the information we care about in a
simple structured format, and start generating both the HTML and
plain text versions of the release notes using XSLT stylesheets
that can now afford to be almost trivial.

There are still some systems out there that have broken
setfilecon*() prototypes. Instead of taking 'const char *tcon' it
is taking 'char *tcon'. The function should just set the context,
not modify it.

We had been bitten with this problem before which resulted in
292d3f2d and subsequently b109c097. However, with one my latest
commits (4674fc6a) I've changed the type of @tcon variable to
'const char *' which results in build failure on the systems from
above.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function is used only from code compiled on Linux. Therefore
on non-Linux platforms it triggers compilation error:

../../src/qemu/qemu_domain.c:209:1: error: unused function 'qemuDomainGetPreservedMounts' [-Werror,-Wunused-function]
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

For the blockjobs, where libvirt is able to track the state internally
we can fix locking of images we can remove the appropriate locks.

Also when doing a pivoting operation we should not acquire the lock on
any of those images since both are actually locked already.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1302168

Images that became the backing chain of the current image due to the
snapshot need to be unlocked in the lock manager. Also if qemu was
paused during the snapshot the current top level images need to be
released until qemu is resumed so that they can be acquired properly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1191901

The code at first changed the definition and then rolled it back in case
of failure. This was ridiculous. Refactor the code so that the image in
the definition is changed only when the snapshot is successful.

The refactor will also simplify further fix of image locking when doing
snapshots.

Libvirt is able to properly model what happens to the backing chain
after a snapshot so there's no real need to redetect the data.
Additionally with the _REUSE_EXT flag this might end up in redetecting
wrong data if the user puts wrong backing chain reference into the
snapshot image.

The libxl driver already supports getting maximum vcpu count via
libxlDomainGetVcpusFlags, allowing to trivially implement
virDomainGetMaxVcpus.

Commit id 'a48c674f' caused problems for systems without PARTED installed.

So move the PARTED probing code back to storage_backend_disk.c and create
a shim within storage_backend.c to call it if WITH_STORAGE_DISK is true;
otherwise, just return -1 with the error.

At startup time, rather than blindly trusting the target devices are
still properly formatted, let's check to make sure the pool's target
devices are all properly formatted before attempting to start the pool.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>