Mechanical move to break up udevIfaceGetIfaceDef() into different
helpers for each of the interface types to hopefully make the code
easier to follow. This moves the bridge code to
udevIfaceGetIfaceDefBridge().

https://bugzilla.redhat.com/show_bug.cgi?id=896685 points out
a regression caused by commit 38c4a9cc - libvirt only labels
the backing chain if the backing chain cache is populated, but
the code to populate the cache was only conditionally performed
if cgroup labeling was necessary.

* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Hoist cache setup...
* src/qemu/qemu_process.c (qemuProcessStart): ...earlier into
caller, where it is now unconditional.

Get rid of the "identical" variable in the ABI stability checks in favor
of return statements and break or refactor very long lines where
possible.

Declare local variables at the start of the block and fix trivial
formatting issues.

Many of the headers were using the old style and even overflowing the 80
column mark.

The label named "cleanup" was used in error cases only. Change it to
"error".

Use the correct type and get rid of "default" label in switch to make
the compiler complain if a new device type is added.

Change the error label to "error" and simplify some error paths.

The message didn't seem to be much helpful

<pre> is forbidden inside <p>

Since closeCallbacks were turned into virObjectLockable, we can no
longer call virQEMUCloseCallbacks APIs from within a registered close
callback.

To avoid having to hold the qemu driver lock while iterating through
close callbacks and calling them. This fixes a real deadlock when a
domain which is being migrated from another host gets autodestoyed as a
result of broken connection to the other host.

The max value of number of cpus to compute(id) should not
be equal or greater than max cpu number.
The bug ocurrs when id value is equal to max cpu number which
leads to the off-by-one error in the following for loop.

 # virsh  cpu-stats guest --start 1
 error: Failed to virDomainGetCPUStats()

 error: internal error cpuacct parse error

Found by John Ferlan (coverity script)

Don't allow interval to be > MAX_INT/1000 in virKeepAliveStart()

Guard against possible overflow in virKeepAliveTimeout() by setting the
timeout to be MAX_INT/1000 since the math following will multiply it by 1000.

The libxl driver was setting the backend field of libxl_device_disk
structure to LIBXL_DISK_BACKEND_TAP when the driver element of disk
configuration was not specified.  This needlessly forces the use of
blktap driver, which may not be loaded in dom0

https://bugzilla.redhat.com/show_bug.cgi?id=912488

Ian Campbell suggested that LIBXL_DISK_BACKEND_UNKNOWN is a better
default in this case

https://www.redhat.com/archives/libvir-list/2013-February/msg01126.html

Currently, if lzop decompression binary produces a warning, it
doesn't exit with zero status but 2 instead. Terrifying, but
true. However, warnings may be ignored using '--ignore-warn'
command line argument.  Moreover, in which case, the exit status
will be zero.

Commit 18937c3a introduced the
memory leak when client->msg.fds is copied to thecall->msg
and then never freed.

For both AttachDevice and UpdateDevice APIs, if the disk device
is 'cdrom' or 'floppy', the operations could be ejecting, updating,
and inserting. For either ejecting or updating, the shared disk
entry of the original disk src has to be removed, because it's
not useful anymore.

And since the original disk def will be changed, new disk def passed
as argument will be free'ed in qemuDomainChangeEjectableMedia, so
we need to copy the orignal disk def before
qemuDomainChangeEjectableMedia, to use it for qemuRemoveSharedDisk.

The disk def could be free'ed by qemuDomainChangeEjectableMedia,
which can thus cause crash if we reference the disk pointer. On
the other hand, we have to remove the added shared disk entry from
the table on error codepath.

The hash entry is changed from "ref" to {ref, @domains}. With this, the
caller can simply call qemuRemoveSharedDisk, without afraid of removing
the entry belongs to other domains. qemuProcessStart will obviously
benifit from it on error codepath (which calls qemuProcessStop to do
the cleanup).

Based on moving various checking into qemuAddSharedDisk, this
avoids the caller using it in wrong ways. Also this adds two
new checking for qemuCheckSharedDisk (disk device not 'lun'
and kernel doesn't support unpriv_sgio simply returns 0).

This moves the various checking into the helpers, to avoid the
callers missing the checking.

Automating a sorting check is the only way to ensure we don't
regress.  Suggested by Dan Berrange.

* src/check-symsorting.pl (check_sorting): Add a parameter,
validate that groups are in order, and that files exist.
* src/Makefile.am (check-symsorting): Adjust caller.
* src/libvirt_private.syms: Fix typo.
* src/libvirt_linux.syms: Fix file name.
* src/libvirt_vmx.syms: Likewise.
* src/libvirt_xenxs.syms: Likewise.
* src/libvirt_sasl.syms: Likewise.
* src/libvirt_libssh2.syms: Likewise.
* src/libvirt_esx.syms: Mention file name.
* src/libvirt_openvz.syms: Likewise.

Due to "feature"/"features" nasty typo, any features marked as mandatory
by one side of a migration are silently considered optional by the other
side. The following is the code that formats mandatory features in
migration cookie:

    for (i = 0 ; i < QEMU_MIGRATION_COOKIE_FLAG_LAST ; i++) {
        if (mig->flagsMandatory & (1 << i))
            virBufferAsprintf(buf, "  <feature name='%s'/>\n",
                              qemuMigrationCookieFlagTypeToString(i));
    }

Some functions were using virDomainDeviceInfo where virDevicePCIAddress
would suffice. Some were only using integers for slots and functions,
assuming the bus numbers are always 0.

Switch from virDomainDeviceInfoPtr to virDevicePCIAddressPtr:
qemuPCIAddressAsString
qemuDomainPCIAddressCheckSlot
qemuDomainPCIAddressReserveAddr
qemuDomainPCIAddressReleaseAddr

Switch from int slot to virDevicePCIAddressPtr:
qemuDomainPCIAddressReserveSlot
qemuDomainPCIAddressReleaseSlot
qemuDomainPCIAddressGetNextSlot

Deleted functions (they would take the same parameters
as ReserveAddr/ReleaseAddr do now.)
qemuDomainPCIAddressReserveFunction
qemuDomainPCIAddressReleaseFunction

Specifying ':' to suppress the error messages printed by getopt().
Then, distinguish the two types of errors.

Before:
 # virsh -c
   virsh: option requires an argument -- 'c'
   error: unsupported option '-?'. See --help.

After:
 # virsh -c
   error: option '-c' requires an argument

 # virsh -x
   error: unsupported option '-x'. See --help.

Purely mechanical (roughly, s/\n/~/; s/~~/\n/; sort by line;
s/~/\n/)

* src/libvirt_private.syms: Sort sections by header file name.

Recent renames were not reflected into the comments of
libvirt_private.syms; furthermore, since we mix private headers from
several directories into this file, knowing where the file lives
can be helpful.

* src/libvirt_private.sym: Reflect recent names.

We pass over the address/port start/end values many times so we put
them in structs.
Signed-off-by: NNatanael Copa <ncopa@alpinelinux.org>
Signed-off-by: NLaine Stump <laine@laine.org>

Let users set the port range to be used for forward mode NAT:

...
  <forward mode='nat'>
    <nat>
      <port start='1024' end='65535'/>
    </nat>
  </forward>
...
Signed-off-by: NNatanael Copa <ncopa@alpinelinux.org>
Signed-off-by: NLaine Stump <laine@laine.org>

Support setting which public ip to use for NAT via attribute
address in subelement <nat> in <forward>:

...
  <forward mode='nat'>
      <address start='1.2.3.4' end='1.2.3.10'/>
  </forward>
...

This will construct an iptables line using:

  '-j SNAT --to-source <start>-<end>'

instead of:

  '-j MASQUERADE'
Signed-off-by: NNatanael Copa <ncopa@alpinelinux.org>
Signed-off-by: NLaine Stump <laine@laine.org>

We need to drop the server lock before calling virObjectUnlock(client)
since in case we had the last reference to the client, its dispose
callback would be called and that could possibly try to lock the server
and cause a deadlock. This is exactly what happens when there is only
one QEMU domain running and it is marked to be autodestroyed when the
connection dies. This results in qemuProcessAutoDestroy ->
qemuProcessStop -> virNetServerRemoveShutdownInhibition call sequence,
where the last function locks the server.

The function does not report any errors so there should be no need too
reset an existing error first. Moreover, virTypedParamsFree is mostly
called in cleanup phase where it has the potential to reset any useful
reported earlier.

It doesn't make sense to print the unit (B) only with Ki, Mi, ...
prefixes. Even those poor bytes under 1 KiB are still bytes :-)

Gcc lets you do:

int ATTRIBUTE_NONNULL(1) foo(void *param);
int foo(void *param) ATTRIBUTE_NONNULL(1);
int ATTRIBUTE_NONNULL(1) foo(void *param) { ... }

but chokes on:

int foo(void *param) ATTRIBUTE_NONNULL(1) { ... }

However, since commit eefb881d, we have intentionally been disabling
ATTRIBUTE_NONNULL because of lame gcc handling of the attribute (that
is, gcc doesn't do decent warning reporting, then compiles code that
mysteriously fails if you break the contract of the attribute, which
is surprisingly easy to do), leaving it on only for Coverity (which
does a much better job of improved static analysis when the attribute
is present).

But completely eliding the macro makes it too easy to write code that
uses the fourth syntax option, if you aren't using Coverity.  So this
patch forces us to avoid syntax errors, even when not using the
attribute under gcc.  It also documents WHY we disable the warning
under gcc, rather than forcing you to find the commit log.

* src/internal.h (ATTRIBUTE_NONNULL): Expand to empty attribute,
rather than nothing, when on gcc.