Technically, it was never used ever since commit @f4d06ca8 introduced
it, but the fact that we called VIR_FREE on it was enough for Clang to
never complain about it.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This was doing a plain "return".
Signed-off-by: NSukrit Bhatnagar <skrtbhtngr@gmail.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

This function retrieves the name of the OVS bridge that the given
netdev is attached to. This separate function is necessary because OVS
set the IFLA_MASTER attribute to "ovs-system" for all netdevs that are
attached to an OVS bridge, so the standard method of retrieving the
master can't be used.
Signed-off-by: NLaine Stump <laine@laine.org>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.

Generated using

  $ git grep -El '[[:blank:]][[:blank:]]\\$' | \
    grep -E '*\.([chx]|am|mk)$$' | \
    while read f; do \
      sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
    done
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

A new function virNetDevOpenvswitchUpdateVlan has been created to instruct
OVS of the changes. qemuDomainChangeNet has been modified to handle the
update of the VLAN configuration for a running guest and rely on
virNetDevOpenvswitchUpdateVlan to do the actual update if needed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This piece of code is going to be reused. So move it out to a
separate function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1461270

When fetching stats for a vhost-user type of interface, we run
couple of ovs-vsctl commands and parse their output. However, not
all stats exist at all times, for instance "rx_dropped" or
"tx_errors" can be missing. Thing is, we ask for a bulk of
statistics and if one of them is missing an error is reported
instead of returning the rest. Since we ignore errors, we fail to
set statistics. Fix this by asking for each piece alone.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1459091

We try to get the last element of the passed path by calling
strrch(path, '/'). However, the pointer that strrchr() returns
points at the slash, We want string that starts right after that.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This patchs allows to set the timeout value used for all
openvswitch calls. The default timeout value remains as
before at 5 seconds.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Based on work of Mehdi Abaakouk <sileht@sileht.net>.

When parsing vhost-user interface XML and no ifname is found we
can try to fill it in in post parse callback. The way this works
is we try to make up interface name from given socket path and
then ask openvswitch whether it knows the interface.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When vhostuser interfaces are used, the interface statistics
are not available in /proc/net/dev.

This change looks at the openvswitch interfaces statistics
tables to provide this information for vhostuser interface.

Note that in openvswitch world drop/error doesn't always make sense
for some interface type. When these informations are not available we
set them to 0 on the virDomainInterfaceStats.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit 871e10fc fixed a memory corruption error, but called strlen()
twice on the same string to do so. Even though the compiler is
probably smart enough to optimize the second call away, having a
single invocation makes the code slightly cleaner.
Suggested-by: NMichal Privoznik <mprivozn@redhat.com>

libvirtd crashes on free()ing portData for an open vswitch port if that port
was deleted.  To reproduce:

ovs-vsctl del-port vnet0
virsh migrate --live kvm1 qemu+ssh://dstHost/system

Error message:
libvirtd: *** Error in `/usr/sbin/libvirtd': free(): invalid pointer: 0x000003ff90001e20 ***

The problem is that virCommandRun can return an empty string in the event that
the port being queried does not exist. When this happens then we are
unconditionally overwriting a newline character at position strlen()-1. When
strlen is 0, we overwrite memory that does not belong to the string.

The fix: Only overwrite the newline if the string is not empty.
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: NJason J. Herne <jjherne@linux.vnet.ibm.com>

Introduced by f6a2f97e

Problem Description:
After multiple times of migrating a domain, which has an ovs interface with no portData set,
with non-shared disk, nbd ports got overflowed.

The steps to reproduce the problem:
1 define and start a domain with its network configured as:
    <interface type='bridge'>
          <source bridge='br0'/>
          <virtualport type='openvswitch'>
          </virtualport>
          <model type='virtio'/>
          <driver name='vhost' queues='4'/>
    </interface>
2 do not set the network's portData.
3 migrate(ToURI2) it with flag 91(1011011), which means:
  VIR_MIGRATE_LIVE
  VIR_MIGRATE_PEER2PEER
  VIR_MIGRATE_PERSIST_DEST
  VIR_MIGRATE_UNDEFINE_SOURCE
  VIR_MIGRATE_NON_SHARED_DISK
4 migrate success, but we got an error log in libvirtd.log:
  error : virCommandWait:2423 : internal error: Child process (ovs-vsctl --timeout=5 get Interface
  vnet1 external_ids:PortData) unexpected exit status 1: ovs-vsctl: no key "PortData" in Interface
  record "vnet1" column external_ids
5 migrate it back, migrate it , migrate it back, .......
6 nbd port got overflowed.

The reasons for the problem is :
1 virNetDevOpenvswitchGetMigrateData() takes it as wrong if no portData is available for  the ovs
 interface of a domain. (We think it's not appropriate, as portData is just OPTIONAL)
2 in func qemuMigrationBakeCookie(), it fails in qemuMigrationCookieAddNetwork(), and returns with -1.
 qemuMigrationCookieAddNBD() is not called thereafter, and mig->nbd is still NULL.
3 However, qemuMigrationRun() just *WARN* if qemuMigrationBakeCookie() fails, migration still successes.
 cookie is NULL, it's not baked on the src side.
4 On the destination side, it would alloc a port first and then free the nbd port in COOKIE.
 But the cookie is NULL due to qemuMigrationCookieAddNetwork() failure at src side. thus the nbd port
 is not freed.

In this patch, we add "--if-exists" option to make ovs-vsctl not raise error if there's no portData available.
Further more, because portData may be NULL in the cookie at the dest side, check it before setting portData.
Signed-off-by: NZhou Yimin <zhouyimin@huawei.com>
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>

virReportSystemError is reserved for reporting system errors, calling it
with VIR_ERR_* error codes produces error messages that do not make any
sense, such as

    internal error: guest failed to start: Kernel doesn't support user
    namespace: Link has been severed

We should prohibit wrong usage with a syntax-check rule.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If the openvswitch service is stopped, and is followed by destroying a
VM, the openvswitch bridge translates into a state where it doesn't
recover the port configuration. While it successfully fetches data
from the internal DB, since the corresponding virtual interface does
not exists anymore the whole recovery process fails leaving restarted
VM with inability to connect to the bridge. The following set of
commands will trigger the problem:

virsh start vm
service openvswitch-switch stop
virsh destroy vm
service openvswitch-switch start
virsh start vm
Signed-off-by: NChunhe Li <lichunhe@huawei.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Replace:
if (virBufferError(&buf)) {
    virBufferFreeAndReset(&buf);
    virReportOOMError();
    ...
}

with:
if (virBufferCheckError(&buf) < 0)
    ...

This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)

'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can).  But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).

Fix up remaining offenders in src/util.

* src/util/virnetdev.h (virNetDevSetMAC)
(virNetDevReplaceMacAddress, virNetDevValidateConfig)
(virNetDevReplaceNetConfig): Use intended type.
* src/util/virnetdevbandwidth.h (virNetDevBandwidthCopy)
(virNetDevBandwidthPlug): Likewise.
* src/util/virnetdevmacvlan.h (virNetDevMacVLanCreate)
(virNetDevMacVLanCreateWithVPortProfile)
(virNetDevMacVLanDeleteWithVPortProfile)
(virNetDevMacVLanRestartWithVPortProfile)
(virNetDevMacVLanVPortProfileRegisterCallback): Likewise.
* src/util/virnetdevopenvswitch.h (virNetDevOpenvswitchAddPort):
Likewise.
* src/util/virnetdevtap.h (virNetDevTapCreateInBridgePort):
Likewise.
* src/util/virnetdevvlan.h (virNetDevVlanEqual)
(virNetDevVlanCopy): Likewise.
* src/util/virnetdevvportprofile.h
(virNetDevVPortProfileAssociate)
(virNetDevVPortProfileDisassociate): Likewise.
* src/util/virnetlink.h (virNetlinkEventRemoveCallback)
(virNetlinkEventAddClient, virNetlinkEventRemoveClient):
Likewise.
* src/util/virnetdev.c (virNetDevSetMAC)
(virNetDevReplaceMacAddress, virNetDevValidateConfig)
(virNetDevReplaceNetConfig): Fix fallout.
* src/util/virnetdevbandwidth.c (virNetDevBandwidthCopy)
(virNetDevBandwidthPlug): Likewise.
* src/util/virnetdevmacvlan.c (virNetDevMacVLanCreate)
(virNetDevMacVLanCreateWithVPortProfile)
(virNetDevMacVLanDeleteWithVPortProfile)
(virNetDevMacVLanRestartWithVPortProfile)
(virNetDevMacVLanVPortProfileRegisterCallback): Likewise.
* src/util/virnetdevopenvswitch.c (virNetDevOpenvswitchAddPort):
Likewise.
* src/util/virnetdevtap.c (virNetDevTapCreateInBridgePort):
Likewise.
* src/util/virnetdevvlan.c (virNetDevVlanEqual)
(virNetDevVlanCopy): Likewise.
* src/util/virnetdevvportprofile.c
(virNetDevVPortProfileAssociate)
(virNetDevVPortProfileDisassociate)
(virNetDevVPortProfileOpSetLink, virNetDevVPortProfileOpCommon)
(virNetDevVPortProfileOp8021Qbg, virNetDevVPortProfileOp8021Qbh):
Likewise.
* src/util/virnetlink.c (virNetlinkEventRemoveCallback)
(virNetlinkEventAddClient, virNetlinkEventRemoveClient):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Commit 861d4056 added code (my personal change to "clean up" the
submitter's code, *not* the fault of the submitter) that dereferenced
virtVlan without first checking for NULL. This patch fixes that and,
as part of the fix, cleans up some unnecessary obtuseness.

This patch adds functionality to allow libvirt to configure the
'native-tagged' and 'native-untagged' modes on openvswitch networks.
Signed-off-by: NLaine Stump <laine@redhat.com>

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

Add utility functions for Open vSwitch to both save
per-port data before a live migration, and restore the
per-port data after a live migration.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=852984

If a network or interface is configured to use Open vSwitch, but
ovs-vswitchd (the Open vSwitch database service) isn't running, the
ovs-vsctl add-port/del-port commands will hang indefinitely rather
than returning an error. There is a --nowait option, but that appears
to have no effect on add-port and del-port commands, so instead we add
a --timeout=5 to the commands - they will retry for up to 5 seconds,
then fail if there is no response.

The introduction of the new VLAN code, along with the fix
from 5e465df6, caused the
addition of OVS ports to fail with the following message:

ovs-vsctl: 00002|vsctl|ERR|: missing column name

This fix takes into account the VLAN arguments are optional,
and correctly sets up the command line to run the "ovs-vsctl"
command to add ports to the OVS bridge.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>
CC: Eric Blake <eblake@redhat.com>

As pointed by Eric Blake

Fixup buffer usage when handling VLANs. Also fix the logic
used to determine if the virNetDevVlanPtr is valid or not.
Fixes crashes in the latest code when using Open vSwitch
virtualports.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>

* src/util/virnetdevopenvswitch.c (virNetDevOpenvswitchAddPort): avoid libvirtd
crash due to derefing a NULL virtVlan->tag.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=852383Signed-off-by: NAlex Jia <ajia@redhat.com>

Add the ability to support VLAN tags for Open vSwitch virtual port
types. To accomplish this, modify virNetDevOpenvswitchAddPort and
virNetDevTapCreateInBridgePort to take a virNetDevVlanPtr
argument. When adding the port to the OVS bridge, setup either a
single VLAN or a trunk port based on the configuration from the
virNetDevVlanPtr.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>

virNetDevVPortProfile has (had) a type field that can be set to one of
several values, and a union of several structs, one for each
type. When a domain's interface object is of type "network", the
domain config may not know beforehand which type of virtualport is
going to be provided in the actual device handed down from the network
driver at runtime, but may want to set some values in the virtualport
that may or may not be used, depending on the type. To support this
usage, this patch replaces the union of structs with toplevel fields
in the struct, making it possible for all of the fields to be set at
the same time.

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.