- 11 12月, 2012 1 次提交
-
-
由 Laine Stump 提交于
I noticed when writing the backend functions for virNetworkUpdate that I was repeating the same sequence of memmove, VIR_REALLOC, nXXX-- (and messed up the args to memmove at least once), and had seen the same sequence in a lot of other places, so I decided to write a few utility functions/macros - see the .h file for full documentation. The intent is to reduce the number of lines of code, but more importantly to eliminate the need to check the element size and element count arithmetic every time we need to do this (I *always* make at least one mistake.) VIR_INSERT_ELEMENT: insert one element at an arbitrary index within an array of objects. The size of each object is determined automatically by the macro using sizeof(*array). The new element's contents are copied into the inserted space, then the original copy of contents are 0'ed out (if everything else was successful). Compile-time assignment and size compatibility between the array and the new element is guaranteed (see explanation below [*]) VIR_INSERT_ELEMENT_COPY: identical to VIR_INSERT_ELEMENT, except that the original contents of newelem are not cleared to 0 (i.e. a copy is made). VIR_APPEND_ELEMENT: This is just a special case of VIR_INSERT_ELEMENT that "inserts" one past the current last element. VIR_APPEND_ELEMENT_COPY: identical to VIR_APPEND_ELEMENT, except that the original contents of newelem are not cleared to 0 (i.e. a copy is made). VIR_DELETE_ELEMENT: delete one element at an arbitrary index within an array of objects. It's assumed that the element being deleted is already saved elsewhere (or cleared, if that's what is appropriate). All five of these macros have an _INPLACE variant, which skips the memory re-allocation of the array, assuming that the caller has already done it (when inserting) or will do it later (when deleting). Note that VIR_DELETE_ELEMENT* can return a failure, but only if an invalid index is given (index + amount to delete is > current array size), so in most cases you can safely ignore the return (that's why the helper function virDeleteElementsN isn't declared with ATTRIBUTE_RETURN_CHECK). A warning is logged if this ever happens, since it is surely a coding error. [*] One initial problem with the INSERT and APPEND macros was that, due to both the array pointer and newelem pointer being cast to void* when passing to virInsertElementsN(), any chance of type-checking was lost. If we were going to move in newelem with a memmove anyway, we would be no worse off for this. However, most current open-coded insert/append operations use direct struct assignment to move the new element into place (or just populate the new element directly) - thus use of the new macros would open a possibility for new usage errors that didn't exist before (e.g. accidentally sending &newelemptr rather than newelemptr - I actually did this quite a lot in my test conversions of existing code). But thanks to Eric Blake's clever thinking, I was able to modify the INSERT and APPEND macros so that they *do* check for both assignment and size compatibility of *ptr (an element in the array) and newelem (the element being copied into the new position of the array). This is done via clever use of the C89-guaranteed fact that the sizeof() operator must have *no* side effects (so an assignment inside sizeof() is checked for validity, but not actually evaluated), and the fact that virInsertElementsN has a "# of new elements" argument that we want to always be 1.
-
- 04 12月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Commit 71d12562 tried to fix a problem where rebasing an old branch on top of newer libvirt.git resulted in automake failing because of a missing AUTHORS file. However, while the fix worked for an incremental 'make', it did not work for someone that directly reran './autogen.sh'. Reported by Laine Stump. * autogen.sh (autoreconf): Check for same conditions as cfg.mk. * cfg.mk (_update_required): Add comments.
-
- 15 11月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Ever since commit 7b21981c started generating AUTHORS, we now have the situation that if you flip between two branches in the same git repository that cross that commit boundary, then 'make' will fail due to automake complaining about AUTHORS not existing. The simplest solution is to realize that if AUTHORS does not exist, then we flipped branches so we will need to rerun bootstrap anyways; and rerunning bootstrap ensures AUTHORS will exist in time. * cfg.mk (_update_required): Also depend on AUTHORS.
-
- 02 11月, 2012 3 次提交
-
-
由 Daniel P. Berrange 提交于
This documents the following whitespace rules if(foo) // Bad if (foo) // Good int foo (int wizz) // Bad int foo(int wizz) // Good bar = foo (wizz); // Bad bar = foo(wizz); // Good typedef int (*foo) (int wizz); // Bad typedef int (*foo)(int wizz); // Good int foo( int wizz ); // Bad int foo(int wizz); // Good There is a syntax-check rule extension to validate all these rules. Checking for 'function (...args...)' is quite difficult since it needs to ignore valid usage with keywords like 'if (...test...)' and while/for/switch. It must also ignore source comments and quoted strings. It is not possible todo this with a simple regex in the normal syntax-check style. So a short Perl script is created instead to analyse the source. In practice this works well enough. The only thing it can't cope with is multi-line quoted strings of the form "start of string\ more lines\ more line\ the end" but this can and should be written as "start of string" "more lines" "more line" "the end" with this simple change, the bracket checking script does not have any false positives across libvirt source, provided it is only run against .c files. It is not practical to run it against .h files, since those use whitespace extensively to get alignment (though this is somewhat inconsistent and could arguably be fixed). The only limitation is that it cannot detect a violation where the first arg starts with a '*', eg foo(*wizz); since this generates too many false positives on function typedefs which can't be supressed efficiently. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Jiri Denemark 提交于
Now that the offending code was removed, we may remove this as well.
-
由 Michal Privoznik 提交于
With our fix of mkostemp (pushed as 2b435c15) we define a macro to compile with uclibc. However, this definition is conditional and thus needs to be properly indented. Moreover, with this definition sc_prohibit_mkstemp syntax-check rule keeps yelling: src/util/logging.c:63:# define mkostemp(x,y) mkstemp(x) maint.mk: use mkostemp with O_CLOEXEC instead of mkstemp Therefore we should ignore this file for this rule.
-
- 01 11月, 2012 1 次提交
-
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=871756 Commit cd1e8d1c assumed that systems new enough to have journald also have mkostemp; but this is not true for uclibc. For that matter, use of mkstemp[s] is unsafe in a multi-threaded program. We should prefer mkostemp[s] in the first place. * bootstrap.conf (gnulib_modules): Add mkostemp, mkostemps; drop mkstemp and mkstemps. * cfg.mk (sc_prohibit_mkstemp): New syntax check. * tools/virsh.c (vshEditWriteToTempFile): Adjust caller. * src/qemu/qemu_driver.c (qemuDomainScreenshot) (qemudDomainMemoryPeek): Likewise. * src/secret/secret_driver.c (replaceFile): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
-
- 31 10月, 2012 1 次提交
-
-
由 Laine Stump 提交于
This patch resolves: https://bugzilla.redhat.com/show_bug.cgi?id=871201 If libvirt is restarted after updating the dnsmasq or radvd packages, a subsequent "virsh net-destroy" will fail to kill the dnsmasq/radvd process. The problem is that when libvirtd restarts, it re-reads the dnsmasq and radvd pidfiles, then does a sanity check on each pid it finds, including checking that the symbolic link in /proc/$pid/exe actually points to the same file as the path used by libvirt to execute the binary in the first place. If this fails, libvirt assumes that the process is no longer alive. But if the original binary has been replaced, the link in /proc is set to "$binarypath (deleted)" (it literally has the string " (deleted)" appended to the link text stored in the filesystem), so even if a new binary exists in the same location, attempts to resolve the link will fail. In the end, not only is the old dnsmasq/radvd not terminated when the network is stopped, but a new dnsmasq can't be started when the network is later restarted (because the original process is still listening on the ports that the new process wants). The solution is, when the initial "use stat to check for identical inodes" check for identity between /proc/$pid/exe and $binpath fails, to check /proc/$pid/exe for a link ending with " (deleted)" and if so, truncate that part of the link and compare what's left with the original binarypath. A twist to this problem is that on systems with "merged" /sbin and /usr/sbin (i.e. /sbin is really just a symlink to /usr/sbin; Fedora 17+ is an example of this), libvirt may have started the process using one path, but /proc/$pid/exe lists a different path (indeed, on F17 this is the case - libvirtd uses /sbin/dnsmasq, but /proc/$pid/exe shows "/usr/sbin/dnsmasq"). The further bit of code to resolve this is to call virFileResolveAllLinks() on both the original binarypath and on the truncated link we read from /proc/$pid/exe, and compare the results. The resulting code still succeeds in all the same cases it did before, but also succeeds if the binary was deleted or replaced after it was started.
-
- 20 10月, 2012 1 次提交
-
-
由 Cole Robinson 提交于
AUTHORS.in tracks the maintainers, as well as some folks who were previously in AUTHORS but don't have a git commit with proper attribution. Generated output is sorted alphabetically and lacks pretty spacing, so tweak AUTHORS.in to follow the same format. Additionally, drop the syntax-check rule that previously validated AUTHORS against git log.
-
- 01 10月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Several people have reported that if the .gnulib submodule is dirty, then 'make' will go into an infinite loop attempting to rerun bootstrap, because that never cleans up the dirty submodule. By default, we should halt and make the user investigate, but if the user doesn't know why or care that the submodule is dirty, I also added the ability to 'make CLEAN_SUBMODULE=1' to get things going again. Also, while testing this, I noticed that when a submodule update was needed, 'make' would first run autoreconf, then bootstrap (which reruns autoreconf); adding a strategic dependency allows for less work. * .gnulib: Update to latest, for maint.mk improvements. * cfg.mk (_autogen): Also hook maint.mk, to run before autoreconf. * autogen.sh (bootstrap): Refuse to run if gnulib is dirty, unless user requests discarding gnulib changes.
-
- 18 9月, 2012 1 次提交
-
-
由 Martin Kletzander 提交于
Two more problems in "run.in" made the syntax-check fail.
-
- 13 9月, 2012 1 次提交
-
-
由 Eric Blake 提交于
I got an off-list report about a bad diagnostic: Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8 True to form, I've added a syntax check rule to prevent it from recurring, and found several other offenders. * cfg.mk (sc_require_whitespace_in_translation): New rule. * src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add space. * src/esx/esx_util.c (esxUtil_ParseUri): Likewise. * src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise. * src/qemu/qemu_driver.c (qemuDomainSetMetadata) (qemuDomainGetMetadata): Likewise. * src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise. * src/rpc/virnettlscontext.c (virNetTLSContextCheckCertDNWhitelist): Likewise. * src/vmware/vmware_driver.c (vmwareDomainResume): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives): Avoid false negatives. * tools/virsh-domain.c (info_save_image_dumpxml): Reword. Based on a report by Luwen Su.
-
- 07 9月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
To be able to test the QEMU monitor code, we need to have a fake QEMU monitor server. This introduces a simple (dumb) framework that can do this. The test case registers a series of items to be sent back as replies to commands that will be executed. A thread runs the event loop looking for incoming replies and sending back this pre-registered data. This allows testing all QEMU monitor code that deals with parsing responses and errors from QEMU, without needing QEMU around Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 06 9月, 2012 2 次提交
-
-
由 Eric Blake 提交于
Based on the similar gnulib commit 96ad9077. The use of $(_sc_search_regexp) already injects $(ME) into any output messages, so a failure of these rules would look like this, pre-patch: maint.mk: maint.mk: use virStrToLong_*, not strtol variants * cfg.mk (sc_prohibit_strncmp, sc_prohibit_strtol) (sc_libvirt_unmarked_diagnostics): Drop redundant $(ME).
-
由 Eric Blake 提交于
Yesterday's commit 15d2c9fa pointed out that virsh was still using localtime(), which is not thread-safe, even though virsh is definitely multi-threaded. Even if we only ever triggered it from one thread, it's better safe than sorry for maintenance purposes. * cfg.mk (exclude_file_name_regexp--sc_prohibit_nonreentrant): Tighten the rule. * tools/virsh.c (vshOutputLogFile): Avoid localtime. (vshEditWriteToTempFile, vshEditReadBackFile, cmdCd, cmdPwd) (vshCloseLogFile): Avoid strerror. * tools/console.c (vshMakeStdinRaw): Likewise. * tools/virsh-domain.c (vshGenFileName): Fix spacing in previous patch.
-
- 20 8月, 2012 2 次提交
-
-
由 Eric Blake 提交于
Nothing in the testsuite or examples directory should be translated, as it is not part of the normally installed binary. We already meet this rule, but enforcing it will make it easier to remember. Suggested by Daniel P. Berrange. * cfg.mk (sc_prohibit_useless_translation): Enhance rule.
-
由 Daniel P. Berrange 提交于
* cfg.mk: Whitelist virsh.h instead of virsh.c for strcasecmp check * tools/virsh-domain.h, tools/virsh.h: Fix #define indentation
-
- 17 8月, 2012 1 次提交
-
-
由 Eric Blake 提交于
'make distcheck' was failing because a syntax check file, .sc-start-sc_vulnerable_makefile_CVE-2012-3386, got left behind. I traced it to the 'distdir' rule depending on a shortcut syntax-check name rather than the full rule name normally used during 'local-check' from maint.mk. * cfg.mk (distdir): Depend on full rule, not shorthand name.
-
- 15 8月, 2012 1 次提交
-
-
由 Osier Yang 提交于
* tools/virsh.c: New macro vshStrcasecmp * tools/virsh-domain-monitor.c: Use vshStrcasecmp instead of strcasecmp * tools/virsh-snapshot.c: Likewise * cfg.mk: Only avoid doing strcase checking for virsh.c
-
- 07 8月, 2012 6 次提交
-
-
由 Daniel P. Berrange 提交于
Make all the virNetClient* objects use virObject APIs for reference counting Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Make all the virNetServer* objects use the virObject APIs for reference counting Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Make virSocket use the virObject APIs for reference counting Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Make virNetSASLContext and virNetSASLSession use virObject APIs for reference counting Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Make virNetTLSContext and virNetTLSSession use the virObject APIs for reference counting Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
This introduces a fairly basic reference counted virObject type and an associated virClass type, that use atomic operations for ref counting. In a global initializer (recommended to be invoked using the virOnceInit API), a virClass type must be allocated for each object type. This requires a class name, a "dispose" callback which will be invoked to free memory associated with the object's fields, and the size in bytes of the object struct. eg, virClassPtr connclass = virClassNew("virConnect", sizeof(virConnect), virConnectDispose); The struct for the object, must include 'virObject' as its first member eg struct _virConnect { virObject object; virURIPtr uri; }; The 'dispose' callback is only responsible for freeing fields in the object, not the object itself. eg a suitable impl for the above struct would be void virConnectDispose(void *obj) { virConnectPtr conn = obj; virURIFree(conn->uri); } There is no need to reset fields to 'NULL' or '0' in the dispose callback, since the entire object will be memset to 0, and the klass pointer & magic integer fields will be poisoned with 0xDEADBEEF before being free()d When creating an instance of an object, one needs simply pass the virClassPtr eg virConnectPtr conn = virObjectNew(connclass); if (!conn) return NULL; conn->uri = virURIParse("foo:///bar") Object references can be manipulated with virObjectRef(conn) virObjectUnref(conn) The latter returns a true value, if the object has been freed (ie its ref count hit zero) Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 30 7月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
The cfg.mk file rule to check for tab characters was not applied to perl files. Much of our Perl code is full of tabs as a result. Kill them, kill them all !
-
- 27 7月, 2012 3 次提交
-
-
由 Eric Blake 提交于
Commit f9ce7dad tried to kill uses of a raw street address, but missed a few instances. Automate things so we don't introduce new problems in the future. * cfg.mk (sc_copyright_address): New rule. (exclude_file_name_regexp--sc_copyright_address): Add exemption. * bootstrap.conf: Adjust offenders. * build-aux/augeas-gentest.pl: Likewise. * examples/systemtap/events.stp: Likewise. * examples/systemtap/qemu-monitor.stp: Likewise. * examples/systemtap/rpc-monitor.stp: Likewise. * src/dtrace2systemtap.pl: Likewise. * src/esx/esx_vi_generator.py: Likewise. * src/hyperv/hyperv_wmi_generator.py: Likewise. * src/remote/qemu_protocol.x: Likewise. * src/remote/remote_protocol.x: Likewise. * src/rpc/gensystemtap.pl: Likewise. * src/rpc/virnetprotocol.x: Likewise. * tests/object-locking.ml: Likewise. * tools/virt-xml-validate.in: Likewise.
-
由 Eric Blake 提交于
Any time we have a string with no % passed through gettext, a translator can inject a % to cause a stack overread. When there is nothing to format, it's easier to ask for a string that cannot be used as a formatter, by using a trivial "%s" format instead. In the past, we have used --disable-nls to catch some of the offenders, but that doesn't get run very often, and many more uses have crept in. Syntax check to the rescue! The syntax check can catch uses such as virReportError(code, _("split " "string")); by using a sed script to fold context lines into one pattern space before checking for a string without %. This patch is just mechanical insertion of %s; there are probably several messages touched by this patch where we would be better off giving the user more information than a fixed string. * cfg.mk (sc_prohibit_diagnostic_without_format): New rule. * src/datatypes.c (virUnrefConnect, virGetDomain) (virUnrefDomain, virGetNetwork, virUnrefNetwork, virGetInterface) (virUnrefInterface, virGetStoragePool, virUnrefStoragePool) (virGetStorageVol, virUnrefStorageVol, virGetNodeDevice) (virGetSecret, virUnrefSecret, virGetNWFilter, virUnrefNWFilter) (virGetDomainSnapshot, virUnrefDomainSnapshot): Add %s wrapper. * src/lxc/lxc_driver.c (lxcDomainSetBlkioParameters) (lxcDomainGetBlkioParameters): Likewise. * src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML) (virDomainDiskDefParseXML, virDomainGraphicsDefParseXML): Likewise. * src/conf/network_conf.c (virNetworkDNSHostsDefParseXML) (virNetworkDefParseXML): Likewise. * src/conf/nwfilter_conf.c (virNWFilterIsValidChainName): Likewise. * src/conf/nwfilter_params.c (virNWFilterVarValueCreateSimple) (virNWFilterVarAccessParse): Likewise. * src/libvirt.c (virDomainSave, virDomainSaveFlags) (virDomainRestore, virDomainRestoreFlags) (virDomainSaveImageGetXMLDesc, virDomainSaveImageDefineXML) (virDomainCoreDump, virDomainGetXMLDesc) (virDomainMigrateVersion1, virDomainMigrateVersion2) (virDomainMigrateVersion3, virDomainMigrate, virDomainMigrate2) (virStreamSendAll, virStreamRecvAll) (virDomainSnapshotGetXMLDesc): Likewise. * src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel) (virNWFilterDHCPSnoopReq): Likewise. * src/openvz/openvz_driver.c (openvzUpdateDevice): Likewise. * src/openvz/openvz_util.c (openvzKBPerPages): Likewise. * src/qemu/qemu_cgroup.c (qemuSetupCgroup): Likewise. * src/qemu/qemu_command.c (qemuBuildHubDevStr, qemuBuildChrChardevStr) (qemuBuildCommandLine): Likewise. * src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Likewise. * src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise. * src/rpc/virnetsaslcontext.c (virNetSASLSessionGetIdentity): Likewise. * src/rpc/virnetsocket.c (virNetSocketNewConnectUNIX) (virNetSocketSendFD, virNetSocketRecvFD): Likewise. * src/storage/storage_backend_disk.c (virStorageBackendDiskBuildPool): Likewise. * src/storage/storage_backend_fs.c (virStorageBackendFileSystemProbe) (virStorageBackendFileSystemBuild): Likewise. * src/storage/storage_backend_rbd.c (virStorageBackendRBDOpenRADOSConn): Likewise. * src/storage/storage_driver.c (storageVolumeResize): Likewise. * src/test/test_driver.c (testInterfaceChangeBegin) (testInterfaceChangeCommit, testInterfaceChangeRollback): Likewise. * src/vbox/vbox_tmpl.c (vboxListAllDomains): Likewise. * src/xenxs/xen_sxpr.c (xenFormatSxprDisk, xenFormatSxpr): Likewise. * src/xenxs/xen_xm.c (xenXMConfigGetUUID, xenFormatXMDisk) (xenFormatXM): Likewise.
-
由 Eric Blake 提交于
We were defining 'func_or' as '|VIR_ERROR|...', which when put inside 'func_re' resulted in a regex that matches everything in isolation. Thankfully, we always used func_re with a leading anchor \<, and since the empty regex does not start a word, we happened to get the result we wanted; but it's better to define func_or without a leading space converted into a leading empty alternation. * cfg.mk (func_or): Strip leading space.
-
- 26 7月, 2012 11 次提交
-
-
由 Eric Blake 提交于
Pick up some build fixes in the latest gnulib. In particular, we want to ensure that official tarballs are secure, but don't want to penalize people who don't run 'make dist', since fixed automake still hasn't hit common platforms like Fedora 17. * .gnulib: Update to latest, for Automake CVE-2012-3386 detection. * bootstrap: Resync from gnulib. * bootstrap.conf (gnulib_extra_files): Drop missing, since gnulib has dropped it in favor of Automake's version. * cfg.mk (local-checks-to-skip): Conditionally skip the security check in cases where it doesn't matter.
-
由 Osier Yang 提交于
Commands in node device group moved from virsh.c to virsh-nodedev.c, * virsh.c: Remove commands in node device group. * virsh-nodedev.c: New file, filled with commands in node device group * po/POTFILES.in: Add virsh-nodedev.c * cfg.mk: Skip to check config.h including for virsh-nodedev.c
-
由 Osier Yang 提交于
Commands in host group moved from virsh.c to virsh-host.c, * virsh.c: Remove commands in host group. * virsh-host.c: New file, filled with commands in host group * po/POTFILES.in: Add virsh-host.c * cfg.mk: Skip to check config.h including for virsh-host.c
-
由 Osier Yang 提交于
Commands to manage domain snapshot are moved from virsh.c to virsh-snapshot.c. * virsh.c: Remove domain snapshot commands. * virsh-snapshot.c: New file, filled with domain snapshot commands. * po/POTFILES.in: Add virsh-snapshot.c * cfg.mk: Skip strcase and config.h including checking for virsh-snapshot.c
-
由 Osier Yang 提交于
Commands to manage secret are moved from virsh.c to virsh-secret.c, with a few helpers for secret command use. * virsh.c: Remove secret commands and a few helpers. (vshCommandOptSecret, and vshCommandOptSecretBy) * virsh-secret.c: New file, filled with secret commands and its helpers. * po/POTFILES.in: Add virsh-secret.c * cfg.mk: Skip to check config.h including for virsh-secret.c
-
由 Osier Yang 提交于
Commands to manage network filter are moved from virsh.c to virsh-nwfilter.c, with a few helpers for network filter command use. * virsh.c: Remove network filter commands and a few helpers. (vshCommandOptNWFilter, and vshCommandOptNWFilterBy) * virsh-nwfilter.c: New file, filled with network filter commands and its helpers. * po/POTFILES.in: Add virsh-nwfilter.c * cfg.mk: Skip to check config.h including for virsh-nwfilter.c
-
由 Osier Yang 提交于
Commands to manage host interface are moved from virsh.c to virsh-interface.c, with a few helpers for interface command use. * virsh.c: Remove interface commands and a few helpers. (vshCommandOptInterface, vshCommandOptInterfaceBy) * virsh-interface.c: New file, filled with interface commands and its helpers. * cfg.mk: Skip to check config.h including for virsh-interface.c * po/POTFILES.in: Add virsh-interface.c
-
由 Osier Yang 提交于
Commands to manage network are moved from virsh.c to virsh-network.c, with a few helpers for network command use. * virsh.c: Remove network commands and a few helpers. * virsh-network.c: New file, filled with network commands and its helpers. * po/POTFILES.in: Add virsh-network.c * cfg.mk: Skip to check config.h including for virsh-network.c
-
由 Osier Yang 提交于
This splits commands of storage pool group into virsh-pool.c, The helpers not for common use are moved too. Standard copyright is added for the new file. * tools/virsh.c: Remove commands for storage storage pool and a few helpers. (vshCommandOptVol, vshCommandOptVolBy). * tools/virsh-pool.c: New file, filled with commands of storage pool group and its helpers. * po/POTFILES.in: Add virsh-pool.c * cfg.mk: Skip to check config.h including for virsh-pool.c
-
由 Osier Yang 提交于
This splits commands of storage volume group into virsh-volume.c, The helpers not for common use are moved too. Standard copyright is added for the new file. * tools/virsh.c: Remove commands for storage storage volume and a few helpers. (vshCommandOptVol, vshCommandOptVolBy). * tools/virsh-volume.c: New file, filled with commands of storage volume group and its helpers. * po/POTFILES.in: Add virsh-volume.c * cfg.mk: Skip to check config.h including for virsh-volume.c
-
由 Osier Yang 提交于
This splits commands to manage domain into virsh-domain.c,The helpers not for common use are moved into them too. Standard copyright is added for the new file. * tools/virsh.c: - Remove commands for domain group, and one helper (vshDomainVcpuStateToString) - vshStreamSink is moved before commands's definition for it's also used by commands not of domain group, such as volUpload. * tools/virsh-domain.c: - New file, commands for domain group and the one helper are moved into it. * po/POTFILES.in: - Add virsh-domain.c * cfg.mk: - Skip to check config.h including for virsh-domain.c
-