This function returns nothing but zero. Therefore it makes no
sense to have it returning an integer.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

We can't really detect all the authentication data in a sane manner for
disk backing chains. Since the old RBD parser parses it in some cases as
the argv->XML convertor requires it, we can't just drop it.

Instead clear any detected authentication data in the code paths related
to disk backing chain lookup and fix the tests to cope with the change.

https://bugzilla.redhat.com/show_bug.cgi?id=1544659Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The documentation for the JSON/qapi type 'UnixSocketAddress' states that
the unix socket path field is named 'path'. Unfortunately qemu uses
'socket' in case of the gluster driver (despite documented otherwise).

Add logic which will format the correct fields while keeping support of
the old spelling.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1544325Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The QEMU driver loadable module needs to be able to resolve all ELF
symbols it references against libvirt.so. Some of its symbols can only
be resolved against the storage_driver.so loadable module which creates
a hard dependancy between them. By moving the storage file backend
framework into the util directory, this gets included directly in the
libvirt.so library. The actual backend implementations are still done as
loadable modules, so this doesn't re-add deps on gluster libraries.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

While the QEMU QAPI schema describes 'lun' as a number, the code dealing
with JSON strings does not strictly adhere to this schema and thus
formats the number back as a string. Use the new helper to retrieve both
possibilities.

Note that the formatting code is okay and qemu will accept it as an int.

Tweak also one of the test strings to verify that both formats work
with libvirt.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1540290

This will be the first private piece of data that will need to be stored
in the XML for some drivers. Add helpers which will do it.

Some drive backends allow output of debugging information which can be
configured using properties of the image. Add fields to virStorageSource
which will allow configuring them.

Split on the last colon and avoid parsing port if the split remainder
contains the closing square bracket, so that IPv6 addresses are
interpreted correctly.

Similarly to how we store gluster names, split the name into a pool and
image portions when paring the XML and store them separately.

Libvirt historically stores storage source path including the volume as
one string in the XML, but that is not really flexible enough when
dealing with the fields in the code. Previously we'd store the slash
separating the two as part of the image name. This was fine for gluster
but it's not necessary and does not scale well when converting other
protocols.

Don't store the slash as part of the path. The resulting change from
absolute to relative path within the gluster driver should be okay,
as the root directory is the default when accessing gluster.

Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.

Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.

Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.

Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine.  The two new .args
file are exact copies of the non "-source" version of the file.

The virschematest will read the new test files and validate from a
RNG viewpoint things are fine

Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.

Introduce the bare necessities to add privateData to _virStorageSource.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

When formatting an inactive or migratable XML we will need to suppress
backing chain members which were detected from the disk to keep
semantics straight. This means we need to record, whether a
virStorageSource originates from autodetection.

Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.

The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.

Add helpers that will simplify checking if a backing file is valid or
whether it has backing store. The helper virStorageSourceIsBacking
returns true if the given virStorageSource is a valid backing store
member. virStorageSourceHasBacking returns true if the virStorageSource
has a backing store child.

Adding these functions creates a central points for further refactors.

chain->path may be NULL e.g. for NBD drives, so the check needs to avoid
dereferencing the path in such case

We can now use the backing store ID directly rather than counting the
number of images seen while looking up images.

The backing store indexes were not bound to the storage sources in any
way. To allow us to bind a given alias to a given storage source we need
to save the index in virStorageSource. The backing store ids are now
generated when detecting the backing chain.

Since we don't re-detect the backing chain after snapshots, the
numbering needs to be fixed there.

This adds a rule to require https links for the libvirt, qemu
and kvm websites.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Introduce a function to setup any TLS needs for a disk source.

If there's a configuration or other error setting up the disk source
for TLS, then cause the domain startup to fail.

For VxHS, follow the chardevTLS model where if the src->haveTLS hasn't
been configured, then take the system/global cfg->haveTLS setting for
the storage source *and* mark that we've done so via the tlsFromConfig
setting in storage source.

Next, if we are using TLS, then generate an alias into a virStorageSource
'tlsAlias' field that will be used to create the TLS object and added to
the disk object in order to link the two together for QEMU.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.

Sample XML for a VxHS disk:

<disk type='network' device='disk'>
  <driver name='qemu' type='raw' cache='none'/>
  <source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
    <host name='192.168.0.1' port='9999'/>
  </source>
  <target dev='vda' bus='virtio'/>
</disk>

Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.

Update the qemuxml2xmltest in order to add a test to show the proper
parsing.

Also update the docs to describe the tls attribute.
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Calling fallocate on the new (smaller) capacity ensures
that the whole file is allocated, but it does not reduce
the file size.

Also call ftruncate after fallocate.

https://bugzilla.redhat.com/show_bug.cgi?id=1366446

We have been trying to implement the ALLOCATE flag to mean
"the volume should be fully allocated after the resize".

Since commit b0579ed9 we do not allocate from the existing
capacity, but from the existing allocation value.
However this value is a total of all the allocated bytes,
not an offset.

For a sparsely allocated file:
$ perl -e 'print "x"x8192;' > vol1
$ fallocate -p -o 0 -l 4096 vol1
$ virsh vol-info vol1 default
Capacity:       8.00 KiB
Allocation:     4.00 KiB

Treating allocation as an offset would result in an incompletely
allocated file:
$ virsh vol-resize vol1 --pool default 16384 --allocate
Capacity:       16.00 KiB
Allocation:     12.00 KiB

Call fallocate from zero on the whole requested capacity to fully
allocate the file. After that, the volume is fully allocated
after the resize:
$ virsh vol-resize vol1 --pool default 16384 --allocate
$ virsh vol-info vol1 default
Capacity:       16.00 KiB
Allocation:     16.00 KiB

Introduce a new function virFileAllocate that will call the
non-destructive variants of safezero, essentially reverting
my commit 1390c268
    safezero: fall back to writing zeroes even when resizing
back to the state as of commit 18f03166
    virstoragefile: Have virStorageFileResize use safezero

This means that _ALLOCATE flag will no longer work on platforms
without the allocate syscalls, but it will not overwrite data
either.

Commit id '5604c056' used the wrong API to generate the
<secret type='%s'..." field. The previous code used the
correct API as was done in commit id '6887af39'. The data
is actually a usage type not an auth type even though the
result is the same.

Add the backing parse and a test case to verify parsing of VxHS
backing storage.
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a new virStorageNetProtocol for Veritas HyperScale (VxHS) disks
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Make it less confusing by naming the field which refers to the storage
object as 'nodestorage'.
Reviewed-by: NEric Blake <eblake@redhat.com>

Currently, @port is type of string. Well, that's overkill and
waste of memory. Port is always an integer. Use it as such.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Similarly to when parsing XML we need to fill in default ports for the
backing chain. This was missed in commit 5bda8354

Fill them in right away rather than having to figure out at runtime
whether they are necessary or not.

virStorageSourceNetworkDefaultPort does not need to be exported any
more.

Our documentation provides them, so the helper should return them.

Make the stuff hardcoded in qemu a global helper so that other parts of
the code can determine the default port too.

Now that the JSON deflattener is working sanely we can always attempt
the deflattening so that we can then parse the tree as expected.

Currently the function would deflatten the object by dropping the 'file'
prefix from the attributes. This does not really scale well or adhere to
the documentation.

Until we refactor the worker to properly deflatten everything we at
least simulate it by adding the "file" wrapper object back.

The code will become more universal so it makes more sense for it to
live with the rest of the JSON functions.

https://bugzilla.redhat.com/show_bug.cgi?id=1371892

As it turns out the volume create, build, and refresh path was not peeking
at the meta data, so immediately after a create operation the value displayed
for capacity was still incorrect. However, if a pool refresh was done the
correct value was fetched as a result of a meta data peek.

The reason is it seems historically if the file type is RAW then peeking
at the file just took the physical value for the capacity. However, since
we know if it's an encrypted file, then peeking at the meta data will be
required in order to get a true capacity value.

So check for encryption in the source and if present, use the meta data
in order to fill in the capacity value and set the payload_offset.

Some callers don't need to know the backing format. Make the argument
optional by using a dummy int if NULL is passed.