- 13 2月, 2012 1 次提交
-
-
由 Michal Privoznik 提交于
It's dompmsuspend, not suspend-duration.
-
- 08 2月, 2012 1 次提交
-
-
由 Peter Krempa 提交于
This patch fixes the domain modification impact flags for tie virsh desc command to match the new semantics and fix the docs to match actual behavior.
-
- 04 2月, 2012 2 次提交
-
-
由 Laine Stump 提交于
This allows virsh to use the new VIR_DOMAIN_DESTROY_GRACEUL flag for virDomainDestroyFlags.
-
由 Taku Izumi 提交于
This patch extends "virsh attach-disk" command so that we can specify "rawio" attribute. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
- 02 2月, 2012 1 次提交
-
-
由 Peter Krempa 提交于
This patch adds a new command "desc" to show and modify titles and description for the domains using the new API. This patch also adds a new flag for the "list" command to show titles in the domain list, to allow easy identification of VMs by storing a short description. Example: virsh # list --title Id Name State Title ----------------------------------------------- 0 Domain-0 running Mailserver 1 2 fedora paused
-
- 01 2月, 2012 1 次提交
-
-
由 Jiri Denemark 提交于
This command lists all disk devices with errors
-
- 28 1月, 2012 2 次提交
-
-
由 Michal Privoznik 提交于
under new command "dompmsuspend"
-
由 Zeeshan Ali (Khattak) 提交于
Add a new function to allow changing of capacity of storage volumes. Plan out several flags, even if not all of them will be implemented up front. Expose the new command via 'virsh vol-resize'. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 26 1月, 2012 2 次提交
-
-
由 Michal Privoznik 提交于
Currently, we support only filling a volume with zeroes on wiping. However, it is not enough as data might still be readable by experienced and equipped attacker. Many technical papers have been written, therefore we should support other wiping algorithms.
-
由 Eric Blake 提交于
Typo introduced in commit 4e9953a4, and remained in 6fba577e. * tools/virsh.pod (snapshot-create): Fix pod error.
-
- 25 1月, 2012 1 次提交
-
-
由 Michal Privoznik 提交于
to cmdSnapshotCreate and cmdSnapshotCreateAs.
-
- 24 1月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Extend the 'shutdown' and 'reboot' methods so that they both accept a new argument --mode acpi|agent * tools/virsh.c: New args for shutdown/reboot * tools/virsh.pod: Document new args
-
- 21 1月, 2012 1 次提交
-
-
由 Taku Izumi 提交于
Other virsh domifXXX commands can accept target name as a parameter to specify interface. From viewpoint of consistency, virsh domif-getlink command should accept target name as a parameter. This patch achieves this. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
- 13 1月, 2012 1 次提交
-
-
由 Osier Yang 提交于
Disk "type" and "device" are generally interesting stuff the user may want to known, too. To not break any scripts which parsed the output field, a new option "--details" is introduced to output the two introduced fields.
-
- 12 1月, 2012 2 次提交
-
-
由 Osier Yang 提交于
Just like command "domblklist", the command extracts "type", "source", "target", "model", and "MAC" of all virtual interfaces from domain XML (live or persistent).
-
由 Shradha Shah 提交于
The above option helps to differentiate between implicit and explicit interface pools.
-
- 11 1月, 2012 1 次提交
-
-
由 Eric Blake 提交于
When disk snapshots were first implemented, libvirt blindly refused to allow an external snapshot destination that already exists, since qemu will blindly overwrite the contents of that file during the snapshot_blkdev monitor command, and we don't like a default of data loss by default. But VDSM has a scenario where NFS permissions are intentionally set so that the destination file can only be created by the management machine, and not the machine where the guest is running, so that libvirt will necessarily see the destination file already existing; adding a flag will allow VDSM to force the file reuse without libvirt complaining of possible data loss. https://bugzilla.redhat.com/show_bug.cgi?id=767104 * include/libvirt/libvirt.h.in (virDomainSnapshotCreateFlags): Add VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT. * src/libvirt.c (virDomainSnapshotCreateXML): Document it. Add note about partial failure. * tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Add new flag. * tools/virsh.pod (snapshot-create, snapshot-create-as): Document it. * src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare) (qemuDomainSnapshotCreateXML): Implement the new flag.
-
- 29 12月, 2011 1 次提交
-
-
由 Hu Tao 提交于
Add a new command domiftune to get/set interface parameters. * tools/virsh.c: implement the new command * tools/virsh.pod: documentation of the new command
-
- 26 12月, 2011 2 次提交
-
-
由 Satoru SATOH 提交于
Virsh's echo command looks not having any relations with domains and its description should go into the generic commands section instead of the domain commands section (current).
-
由 Satoru SATOH 提交于
Virsh's send-key command manipulates domains and its description should go into the domain commands section instead of generic commands section (current).
-
- 22 12月, 2011 3 次提交
-
-
由 Michal Privoznik 提交于
This patch alters saving code, so we can report progress and allow cancel via ^C.
-
由 Michal Privoznik 提交于
This patch alters saving code, so we can report progress and allow cancel via ^C.
-
由 Michal Privoznik 提交于
This patch alters dumping code, so we can report progress and allow cancel via ^C.
-
- 21 12月, 2011 2 次提交
-
-
由 Alex Jia 提交于
* tools/virsh.pod: improve virsh man page for domxml-from-native and domxml-to-native commands. Signed-off-by: NAlex Jia <ajia@redhat.com>
-
由 Hu Tao 提交于
add new command numatune to virsh to get/set numa parameters
-
- 16 12月, 2011 1 次提交
-
-
由 Peter Krempa 提交于
Add an option for virsh undefine command, to remove associated storage volumes while undefining a domain. This patch allows the user to remove associated (libvirt managed ) storage volumes while undefining a domain. The new option --storage for the undefine command takes a string argument that consists of comma separated list of target or source path of volumes to be undefined. Volumes are removed after the domain has been successfully undefined, If a volume is not part of a storage pool, the user is warned to remove the volume in question himself. Option --wipe-storage may be specified along with this, that ensures the image is wiped before removing. Option --remove-all-storage enables the user to remove all storage. The name is chosen long as the users should be aware what they're about to do.
-
- 14 12月, 2011 2 次提交
-
-
由 KAMEZAWA Hiroyuki 提交于
PCI <address...> can be specified by attach-disk but multifunction cannot be specified. Add --multifunction support.
-
由 Eric Blake 提交于
I was wondering why 'virsh edit' didn't support the same '--inactive' option as 'virsh dumpxml'; reading the source code showed that --inactive was already implied, and that the only way to alter a running guest rather than affecting next boot is by hot-plugging individual devices, or by something complex like saving the guest and modifying the save image. * tools/virsh.pod (define, edit): Mention behavior when guest is already running.
-
- 01 12月, 2011 3 次提交
-
-
由 Michal Privoznik 提交于
Currently virsh supports only ^] as escape character for console. However, some users might want to use something else. This patch creates such ability by specifying '-e' switch on virsh command line.
-
由 Eric Blake 提交于
Prior to this patch, for a running dom, the commands: $ virsh blkiotune dom --device-weights /dev/sda,502,/dev/sdb,498 $ virsh blkiotune dom --device-weights /dev/sda,503 $ virsh blkiotune dom weight : 500 device_weight : /dev/sda,503 claim that /dev/sdb no longer has a non-default weight, but directly querying cgroups says otherwise: $ cat /cgroup/blkio/libvirt/qemu/dom/blkio.weight_device 8:0 503 8:16 498 After this patch, an explicit 0 is required to remove a device path from the XML, and omitting a device path that was previously specified leaves that device path untouched in the XML, to match cgroups behavior. * src/qemu/qemu_driver.c (parseBlkioWeightDeviceStr): Rename... (qemuDomainParseDeviceWeightStr): ...and use correct type. (qemuDomainSetBlkioParameters): After parsing string, modify rather than replacing existing table. * tools/virsh.pod (blkiotune): Tweak wording.
-
由 Lei Li 提交于
Support virsh command blkdeviotune. Can set or query a block disk I/O throttle setting. Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 30 11月, 2011 1 次提交
-
-
由 Hu Tao 提交于
This adds per-device weights to <blkiotune>. Note that the cgroups implementation only supports weights per block device, and not per-file within the device; hence this option must be global to the domain definition rather than tied to individual <devices>/<disk> entries: <domain ...> <blkiotune> <device> <path>/path/to/block</path> <weight>1000</weight> </device> </blkiotune> .. This patch also adds a parameter --device-weights to virsh command blkiotune for setting/getting blkiotune.weight_device for any hypervisor that supports it. All <device> entries under <blkiotune> are concatenated into a single string attribute under virDomain{Get,Set}BlkioParameters, named "device_weight". Signed-off-by: NHu Tao <hutao@cn.fujitsu.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 29 11月, 2011 3 次提交
-
-
由 Osier Yang 提交于
-
由 Jiri Denemark 提交于
-
由 Srivatsa S. Bhat 提交于
Add a new command 'nodesuspend' to perform a timed suspend on the host. Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
-
- 17 11月, 2011 1 次提交
-
-
由 Laine Stump 提交于
One of the top questions by libvirt users is how to create a host bridge device so that guests can be directly on the physical network. There are several example documents that explain how to do this manually, but following them often results in confusion and failure. virt-manager does a good job of creating a bridge based on an existing network device, but not everyone wants to use virt-manager. This patch adds a new command, iface-bridge that makes it just about as simple as possible to create a new bridge device based on an existing ethernet/vlan/bond device (including associating IP configuration with the bridge rather than the now-attached device), and start that new bridge up ready for action, eg: virsh iface-bridge eth0 br0 For symmetry's sake, it also adds a command to remove a device from a bridge, restoring the IP config to the now-unattached device: virsh iface-unbridge br0 (I had a short debate about whether to do "iface-unbridge eth0" instead, but that would involve searching through all bridge devices for the one that contained eth0, which seems like a bit too much trouble). NOTE: These two commands require that the netcf library be available on the host. Hopefully this will provide some extra incentive for people using suse, debian, ubuntu, and other similar systems to polish up (and push downstream) the ports to those distros recently pushed to the upstream netcf repo by Dan Berrange. Anyone interested in helping with that effort in any way should join the netcf-devel mailing list (subscription info at https://fedorahosted.org/mailman/listinfo/netcf-devel) During creation of the bridge, it's possible to specify whether or not the STP protocol should be started up on the bridge and, if so, how many seconds the bridge should squelch traffic from newly added devices while learning new topology (defaults are stp='on' and delay='0', which seems to usually work best for bridges used in the context of libvirt guests). There is also an option to not immediately start the bridge (and a similar option to not immediately start the un-attached device after destroying the bridge. Default is to start the new device, because in the case of iface-unbridge not starting is strongly discouraged as it will leave the system with no network connectivity on that interface (because it's necessary to destroy/undefine the bridge device before the unattached device can be defined), and it seemed better to make the option for iface-bridge behave consistently. NOTE TO THOSE TRYING THESE COMMANDS FOR THE FIRST TIME: to guard against any "unexpected" change to configuration, it is advisable to issue an "virsh iface-begin" command before starting any interface config changes, and "virsh iface-commit" only after you've verified that everything is working as you expect. If something goes wrong, you can always run "virsh iface-rollback" or reboot the system (which should automatically do iface-rollback). Aside from adding the code for these two functions, and the two entries into the command table, the only other change to virsh.c was to add the option name to vshCommandOptInterfaceBy(), because the iface-unbridge command names its interface option as "bridge". virsh.pod has also been updated with short descriptions of these two new commands.
-
- 21 10月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Clarify some of the effects of managed passthrough <hostdev> devices; with recent changes (commit d0935478), a nodedev-reattach is only needed to pair up to an explicit nodedev-dettach (but beware that older virt-manager has a bug where it uses explicit nodedev-dettach under the hood when using the gui to hotplug a hostdev device). * docs/formatdomain.html.in: Mention reattach. * tools/virsh.pod (nodedev): Mention managed mode.
-
- 20 10月, 2011 1 次提交
-
-
由 Hu Tao 提交于
Adds two options, inbound and outbound, to attach-interface to set bandwidth when attaching interfaces
-
- 13 10月, 2011 2 次提交
-
-
由 Michal Privoznik 提交于
This flag is intended to allow user to do so called system reset after dump, instead of sending ACPI reboot event.
-
由 Eric Blake 提交于
Counterpart to --roots. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_LIST_LEAVES): New flag. * src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames) (virDomainSnapshotNumChildren) (virDomainSnapshotListChildrenNames): Document it. * tools/virsh.c (cmdSnapshotList): Expose it. * tools/virsh.pod (snapshot-list): Document --leaves.
-