A lock manager may operate in various modes. The direct mode of
operation is to obtain locks based on the resources associated
with devices in the XML. The indirect mode is where the app
creating the domain provides explicit leases for each resource
that needs to be locked. This XML extension allows for listing
resources in the XML

  <devices>
     ...
     <lease>
       <lockspace>somearea</lockspace>
       <key>thequickbrownfoxjumpsoverthelazydog</key>
       <target path='/some/lease/path' offset='23432'/>
     </lease>
     ...
  </devices>

The 'lockspace' is a unique identifier for the lockspace which
the lease is associated

The 'key' is a unique identifier for the resource associated
with the lease.

The 'target' is the file on disk where the leases are held.

* docs/schemas/domain.rng: Add lease schema
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
  formatting for leases
* tests/qemuxml2argvdata/qemuxml2argv-lease.args,
  tests/qemuxml2argvdata/qemuxml2argv-lease.xml,
  tests/qemuxml2xmltest.c: Test XML handling for leases

and check regression

Make virtTestLoadFile allocate the buffer to read the file into.

Fix logic error in virtTestLoadFile, stop reading on the first empty line.

Use virFileReadLimFD in virtTestCaptureProgramOutput to avoid manual
buffer handling.

A few of the tests were missing basic sanity checks, while most
of them were doing copy-and-paste initialization (in fact, some
of them pasted the argc > 1 check more than once!).  It's much
nicer to do things in one common place, and minimizes the size of
the next patch that fixes getcwd usage.

* tests/testutils.h (EXIT_AM_HARDFAIL): New define.
(progname, abs_srcdir): Define for all tests.
(VIRT_TEST_MAIN): Change callback signature.
* tests/testutils.c (virtTestMain): Do more common init.
* tests/commandtest.c (mymain): Simplify.
* tests/cputest.c (mymain): Likewise.
* tests/esxutilstest.c (mymain): Likewise.
* tests/eventtest.c (mymain): Likewise.
* tests/hashtest.c (mymain): Likewise.
* tests/networkxml2xmltest.c (mymain): Likewise.
* tests/nodedevxml2xmltest.c (myname): Likewise.
* tests/nodeinfotest.c (mymain): Likewise.
* tests/nwfilterxml2xmltest.c (mymain): Likewise.
* tests/qemuargv2xmltest.c (mymain): Likewise.
* tests/qemuhelptest.c (mymain): Likewise.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qparamtest.c (mymain): Likewise.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/sockettest.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* tests/storagepoolxml2xmltest.c (mymain): Likewise.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/virbuftest.c (mymain): Likewise.
* tests/virshtest.c (mymain): Likewise.
* tests/vmx2xmltest.c (mymain): Likewise.
* tests/xencapstest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
* tests/xml2sexprtest.c (mymain): Likewise.
* tests/xml2vmxtest.c (mymain): Likewise.

Make: passed
Make check: passed
Make syntax-check: passed

this is the commit to introduce the function to create new character
device definition for the domain as advised by Cole Robinson
<crobinso@redhat.com>.

The function is used on the relevant places and also new tests has
been added.
Signed-off-by: NMichal Novotny <minovotn@redhat.com>

v1 - v2:
  * Add missed tests/qemuxml2argvdata/qemuxml2argv-cputune.args

For qemu names the primary vga as "qxl-vga":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE,...

  2) if vram is not specified for 2nd qxl device, (use the default
     set by global):

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

For qemu names all qxl devices as "qxl":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE ...

  2) if vram is not specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

"-global" is the only way to define vram_size for the primary qxl
device, regardless of how qemu names it, (It's not good a good
way, as original idea of "-global" is to set a global default for
a driver property, but to specify vram for first qxl device, we
have to use it).

For other qxl devices, as they are represented by "-device", could
specify it directly and seperately for each, and it overrides the
default set by "-global" if specified.

v1 - v2:
  * modify "virDomainVideoDefaultRAM" so that it returns 16M as the
    default vram_size for qxl device.

  * vram_size * 1024 (qemu accepts bytes for vram_size).

  * apply default vram_size for qxl device for which vram_size is
    not specified.

  * modify "graphics-spice" tests (more sensiable vram_size)

  * Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr,
    to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr).

v2 - v3:
  * Modify default video memory size for qxl device from 16M to 24M

  * Update codes to be consistent with changes on qemu_capabilities.*

This is in response to:

   https://bugzilla.redhat.com/show_bug.cgi?id=629662

Explanation

qemu's virtio-net-pci driver allows setting the algorithm used for tx
packets to either "bh" or "timer". This is done by adding ",tx=bh" or
",tx=timer" to the "-device virtio-net-pci" commandline option.

'bh' stands for 'bottom half'; when this is set, packet tx is all done
in an iothread in the bottom half of the driver. (In libvirt, this
option is called the more descriptive "iothread".)

'timer' means that tx work is done in qemu, and if there is more tx
data than can be sent at the present time, a timer is set before qemu
moves on to do other things; when the timer fires, another attempt is
made to send more data. (libvirt retains the name "timer" for this
option.)

The resulting difference, according to the qemu developer who added
the option is:

    bh makes tx more asynchronous and reduces latency, but potentially
    causes more processor bandwidth contention since the cpu doing the
    tx isn't necessarily the cpu where the guest generated the
    packets.

Solution

This patch provides a libvirt domain xml knob to change the option on
the qemu commandline, by adding a new attribute "txmode" to the
<driver> element that can be placed inside any <interface> element in
a domain definition. It's use would be something like this:

    <interface ...>
      ...
      <model type='virtio'/>
      <driver txmode='iothread'/>
      ...
    </interface>

I chose to put this setting as an attribute to <driver> rather than as
a sub-element to <tune> because it is specific to the virtio-net
driver, not something that is generally usable by all network drivers.
(note that this is the same placement as the "driver name=..."
attribute used to choose kernel vs. userland backend for the
virtio-net driver.)

Actually adding the tx=xxx option to the qemu commandline is only done
if the version of qemu being used advertises it in the output of

    qemu -device virtio-net-pci,?

If a particular txmode is requested in the XML, and the option isn't
listed in that help output, an UNSUPPORTED_CONFIG error is logged, and
the domain fails to start.

Implement blkio tunable XML configuration and parsing.
Reviewed-by: N"Nikunj A. Dadhania" <nikunj@linux.vnet.ibm.com>
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>

qemu allows the user to choose what io storage api should be used,
either the default (threads) or native (linux aio) which in the latter
case can result in better performance.

Based on a patch originally by Matthias Dahl.

Red Hat Bugzilla #591703
Signed-off-by: NEric Blake <eblake@redhat.com>

This supports the '-vga qxl' parameter in upstream QEMU/KVM
which has SPICE support added. This isn't particularly useful
until you get the next patch for -spice support. Also note that
while the libvirt XML supports multiple video devices, this
patch only supports a single one. A later patch can add support
for 2nd, 3rd, etc PCI devices for QXL

* src/qemu/qemu_conf.h: Flag for QXL support
* src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c,
  tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args,
  tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test
  case for generating spice args with RHEL6 kvm

* src/qemu/qemu_conf.c (qemuParseCommandLineSmp): Distinguish
between vcpus and maxvcpus, for new enough qemu.
* tests/qemuargv2xmltest.c (mymain): Add new test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smp.args: New file.

Adding parsing code for memory tunables in the domain xml file
also change the internal define structures used for domain memory
informations
Adds a new specific test

Enable specifying a virtio console device with:

<console type='pty'>
  <target type='virtio'/>
</console>

Add tests for auto memballon, implicit IDE, SCSI, virtio channel
controllers, and console/serial back compat.

Additionally, an explicit qemuxml2argvtest for scsi disks is added.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add a new element to the <os> block:

  <bootmenu enable="yes|no"/>

Which maps to -boot,menu=on|off on the QEMU command line.

I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.

* virStorageEncryptionFormat is called from both
  virDomainDiskDefFormat and virStorageVolTargetDefFormat.  The proper
  indentation in the generated XML depends on the caller.  My earlier
  patch to fix the incorrect indentation for the domain XML broke the
  indentation for the storage XML.  This patch adopts Laine's
  suggestion of requring the caller of virStorageEncryptionFormat to
  provide an unsigned int with the number of spaces the output should
  be indented.  The patch modifies both callers to provide the
  additional argument.

* Add a regression test for the domain XML

* src/conf/domain_conf.c src/conf/storage_conf.c
  src/conf/storage_encryption_conf.c src/conf/storage_encryption_conf.h:
  change the indentation code
* tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.args
  tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.xml: add a regression test

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

Add support for virtio-serial by defining a new 'virtio' channel target type
and a virtio-serial controller. Allows the following to be specified in a
domain:

<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
<channel type='pty'>
  <target type='virtio' name='org.linux-kvm.port.0'/>
  <address type='virtio-serial' controller='0' bus='0'/>
</channel>

* docs/schemas/domain.rng: Add virtio-serial controller and virtio
  channel type.
* src/conf/domain_conf.[ch]: Domain parsing/serialization for
  virtio-serial controller and virtio channel.
* tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml
  parsing test
* src/libvirt_private.syms src/qemu/qemu_conf.c:
  virDomainDefAddDiskControllers() renamed to
  virDomainDefAddImplicitControllers()

The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.

It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
  list of existing PCI addresses, and allocating new addresses.
  Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
  qemuStartVMDaemon() method, as a prelude to moving it into the
  'define' method. Update list of allocated addresses when connecting
  to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
  tests/qemuxml2xmltest.c: Remove USB product test since all
  passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
  unused data files

When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.

* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
  for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
  generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
  to all XML files

This appeases a new gnulib-provided "syntax-check".
* daemon/libvirtd.c (main): Use EXIT_FAILURE, not 1.
* proxy/libvirt_proxy.c (main): Likewise, and EXIT_SUCCESS, not 0.
* tests/conftest.c (main): Likewise.
* tests/reconnect.c (main): Likewise.
* tests/testutils.h (EXIT_AM_SKIP): Define.
* tests/nodeinfotest.c (mymain): Use EXIT_AM_SKIP, not 77.
* tests/qemuargv2xmltest.c: Likewise.
* tests/qemuxml2xmltest.c: Likewise.
* tests/virshtest.c (mymain): Likewise.

Introduce a new type="dir"  mode for <disks> that allows use of
QEMU's  virtual FAT block device driver. eg

    <disk type='dir' device='floppy'>
      <source dir='/tmp/test'/>
      <target dev='fda' bus='fdc'/>
      <readonly/>
    </disk>

gets turned into

  -drive file=fat:floppy:/tmp/test,if=floppy,index=0

Only read-only disks are supported with virtual FAT mode

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
  unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
  empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
  tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
  disk args
* src/security/security_selinux.c: Temporarily skip labelling
  of directory based disks

allows the following to be specified in a domain:
<channel type='pipe'>
  <source path='/tmp/guestfwd'/>
  <target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>

* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
  schemas and the parsing/serialization side for the new construct

QEmu support will add the following on the qemu command line:
 -chardev pipe,id=channel0,path=/tmp/guestfwd
 -net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0

* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax

* src/qemu_conf.c, src/qemu_conf.h, src/qemu_driver.c,
  src/qemu_driver.h: Move to src/qemu/
* daemon/qemud.c, src/Makefile.am, tests/qemuargv2xmltest.c,
  tests/qemuhelptest.c, tests/qemuxml2argvtest.c,
  tests/qemuxml2xmltest.c: Adapt for changed paths

Add option to domain XML for

     <memoryBacking>
        <hugepages/>
     </memoryBacking>

* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
  Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
  and pass it when hugepages are requested.
  Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
  Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
  helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
  handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
  tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
  hugepage tests

	* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
	when starting guests if video card is present
	* tests/qemuhelptest.c: Change to use constants instead
	of hardcoded hex numbers, and add VGA support
	* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
	tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
	element for testing graphics adapter
	* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
	* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests

* docs/formatdomain.html.in docs/libvirt.rng docs/formatdomain.html:
  document the new PCI passthrough format
* tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml:
  and add a regression test for it.
Daniel

* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
  tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.args
  tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml:
  slightly modified patch for SDL fullscreen from Itamar Heim
* docs/formatdomain.html docs/formatdomain.html.in docs/libvirt.rng:
  update the schemas and docs about the sdl graphic element attributes
* AUTHORS: add Itamar Heim
Daniel

* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
  src/qemu_driver.c: patch from Guido Günther allowing to add
  disk as USB devices
* docs/libvirt.rng: extend the schemas for the new value
* tests/qemuxml2argvdata/qemuxml2argv-disk-usb.args
  tests/qemuxml2argvdata/qemuxml2argv-disk-usb.xml
  tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: add a specific
  test to the regression suite
Daniel

* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
  src/qemu_driver.c: Patch from Guido Günther allowing to pass
  usb devices to qemu/kvm
* docs/libvirt.rng: add the new functionality to the grammar
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml
  tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: adding examples
  to the regression tests
* libvirt.spec.in: fix the licence tag
Daniel