We should not set *outfd or *errfd if virExecWithHook() failed
because the caller may close these fds.

Bug present since v0.4.5 (commit 60ed1d2a).

Wen Congyang reported that we have a double-close bug if we fail
virFDStreamOpenInternal, since childfd duplicated one of the fds[]
array contents.  In truth, since we always transfer both members
of fds to other variables, we should close the fds through those
other names, and just use fds[] for pipe().

Bug present since 0.9.0 (commit e886237a).

* src/fdstream.c (virFDStreamOpenFileInternal): Swap scope of
childfd and fds[], to avoid a double close.

KAMEZAWA Hiroyuki reported a nasty double-free bug when virCommand
is used to convert a string into input to a child command.  The
problem is that the poll() loop of virCommandProcessIO would close()
the write end of the pipe in order to let the child see EOF, then
the caller virCommandRun() would also close the same fd number, with
the second close possibly nuking an fd opened by some other thread
in the meantime.  This in turn can have all sorts of bad effects.

The bug has been present since the introduction of virCommand in
commit f16ad06f.

This is based on his first attempt at a patch, at
https://bugzilla.redhat.com/show_bug.cgi?id=823716

* src/util/command.c (_virCommand): Drop inpipe member.
(virCommandProcessIO): Add argument, to avoid closing caller's fd
without informing caller.
(virCommandRun, virCommandNewArgs): Adjust clients.

virCommandRunAsync() will set errfd if it succeed. We should
close it if virFDStreamOpenInternal() fails.

If the system does not support bypass cache, we will close fd,
but it is uninitialized.

Apart from the non-sanlock check build, there is also a little fix for
qemu (EXTRA_DIST had qemu.conf and others inside even if the build was
supposed to be without qemu).

We generate *.aug from *.aug.in by augeas-gentest.pl, so this script
should be included in dist file.

Some of our rules used $(PERL), while others used 'perl'.  Always
using the variable allows a developer to point to a different (often
better) perl than the default one found on $PATH.

* daemon/Makefile.am ($(srcdir)/remote_dispatch.h): s/perl/$(PERL).
* src/Makefile.am ($(srcdir)/remote/remote_client_bodies.h)
(PDWTAGS, %protocol.c, %_probes.stp): Likewise.

Without this fix, a VPATH build (such as used by ./autobuild.sh)
fails with messages like:

make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/daemon'
../../build-aux/augeas-gentest.pl libvirtd.conf ../../daemon/test_libvirtd.aug.in test_libvirtd.aug
cannot read libvirtd.conf: No such file or directory at ../../build-aux/augeas-gentest.pl line 38.

Since the test files are not part of the tarball, we can generate
them into the build dir, but rather than create a subdirectory
just for the test file, it is easier to test them directly in
libvirt.git/src.

* daemon/Makefile.am (AUG_GENTEST): Factor out definition.
(test_libvirtd.aug): Look for correct file.
* src/Makefile.am (AUG_GENTEST): Use $(PERL).
(qemu/test_libvirtd_qemu.aug, lxc/test_libvirtd_lxc.aug)
(locking/test_libvirt_sanlock.aug): Rename to avoid subdirectories.
(check-augeas-qemu, check-augeas-lxc, check-augeas-sanlock): Reflect
location of built tests.
* configure.ac (PERL): Substitute perl.

Autoconf 2.60 and later insist on using ${datarootdir}, rather than
the derived ${datadir} (although the latter defaults to the former,
it is possible to set configure arguments so that they differ):

config.status: creating libvirt.pc
config.status: WARNING:  'libvirt.pc.in' seems to ignore the --datarootdir setting

This patch follows the autoconf manual's suggestions for how to
support 2.59 (RHEL 5) and newer simultaneously.

* libvirt.pc.in (datarootdir): Define, so ${datadir} will not ignore
datarootdir when using newer autoconf.

Currently, we are logging only one side of pipes we
create in virCommandRequireHandshake(); This is enough
in cases where pipe2() returns two consecutive FDs. However,
it is not guaranteed and it may return any FDs.
Therefore, it's wise to log the other ends as well.

When getting number of CPUs the host has assigned, there was always
number "1" returned. Even though all lxc domains with no pinning
launched by libvirt run on all pCPUs (by default, no matter what's the
number), we should at least return the same number as the user
specified when creating the domain.

I added libvirt_qemu_probes.h into BUILT_SOURCES. That makes it
generated, but most probably it is not the clearest way how to do
that, but it fixes the build.

A while back I wrote the attached code to demonstrate how to use
events and serial console to create a serial console that stays up
even when the VM is down.  It might need some work, as I am not
terribly strong with Python.

* examples/python/consolecallback.py: New file.
* examples/python/Makefile.am (EXTRA_DIST): Ship it.

The previous patch fixed an incremental build, but missed that on
a fresh checkout, we now have nothing left that stops make from
nuking libvirt_qemu_probes.o.

* src/Makefile.am ($(libvirt_driver_qemu_la_SOURCES)): Delete,
since this variable is empty.
(.PRECIOUS): Add %_probes.o, so they don't get nuked as an
intermediate by-product after creating %_probes.lo.

The moment you specify a _DEPENDENCIES, older automake (stupidly)
assumes that you will specify _all_ dependencies for that target.
This stupidity has been fixed in automake 1.12, but we cannot rely on
newer automake everywhere.  For libvirt_la_DEPENDENCIES, we took
care of providing the full list, but for libvirt_qemu_la_DEPENDENCIES,
we were missing the dependency on libvirt_qemu_impl.la, which resulted
in a failed build:

make[3]: Entering directory `/home/ajia/Workspace/libvirt/src'
   CCLD   libvirt_driver_qemu.la
libtool: link: `libvirt_qemu_probes.lo' is not a valid libtool object

* src/Makefile.am (libvirt_driver_qemu_la_DEPENDENCIES): Delete;
automake does a better job if it does the entire job.

Otherwise, 'make rpm' fails with:

make[2]: *** No rule to make target `locking/test_libvirt_sanlock.aug.in', needed by `distdir'.  Stop.
make[2]: Leaving directory `/home/dipankar/src/powerpc/libvirt-ppc/src'
make[1]: *** [distdir] Error 1

Reported by Dipankar Sarma.

* src/Makefile.am (CLEANFILES): Clean only the generated file.

strncpy is generally evil - it runs the risk of missing NUL
termination, and more often than not wastes time zeroing way
more bytes than strictly necessary.  We've avoided this evil
in our virStrncpy wrapper, except for places where we forgot
to use the wrapper; meanwhile, we have also added an even
higher layer wrapper for setting virTypedParameter values.

* tools/virsh.c (cmdMemtune, cmdBlkdeviotune): Use modern API.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_strncpy): Tighten.

Gnulib finally relaxed the isatty license, needed as first mentioned here:
https://www.redhat.com/archives/libvir-list/2012-February/msg01022.html

Other improvements include better syntax-check rules (we can delete one
of ours now that it is a duplicate) and better compiler warning usage.

* .gnulib: Update to latest, for isatty.
* cfg.mk (sc_prohibit_strncpy): Drop a now-redundant rule.
* bootstrap.conf (gnulib_modules): Add isatty.
* bootstrap: Resync from gnulib.

==3240== 23 bytes in 1 blocks are definitely lost in loss record 242 of 744
==3240==    at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==3240==    by 0x8077537: __vasprintf_chk (vasprintf_chk.c:82)
==3240==    by 0x509C677: virVasprintf (stdio2.h:199)
==3240==    by 0x509C733: virAsprintf (util.c:1912)
==3240==    by 0x1906583A: qemudStartup (qemu_driver.c:679)
==3240==    by 0x511991D: virStateInitialize (libvirt.c:809)
==3240==    by 0x40CD84: daemonRunStateInit (libvirtd.c:751)
==3240==    by 0x5098745: virThreadHelper (threads-pthread.c:161)
==3240==    by 0x7953D8F: start_thread (pthread_create.c:309)
==3240==    by 0x805FF5C: clone (clone.S:115)

src/libvirt.c: s,//,/,

To ensure consistent error reporting of invalid arguments,
provide a number of predefined helper methods & macros.

 - An arg which must not be NULL:

   virCheckNonNullArgReturn(argname, retvalue)
   virCheckNonNullArgGoto(argname, label)

 - An arg which must be NULL

   virCheckNullArgGoto(argname, label)

 - An arg which must be positive (ie 1 or greater)

   virCheckPositiveArgGoto(argname, label)

 - An arg which must not be 0

   virCheckNonZeroArgGoto(argname, label)

 - An arg which must be zero

   virCheckZeroArgGoto(argname, label)

 - An arg which must not be negative (ie 0 or greater)

   virCheckNonNegativeArgGoto(argname, label)

* src/libvirt.c, src/libvirt-qemu.c,
  src/nodeinfo.c, src/datatypes.c: Update to use
  virCheckXXXX macros
* po/POTFILES.in: Add libvirt-qemu.c and virterror_internal.h
* src/internal.h: Define macros for checking invalid args
* src/util/virterror_internal.h: Define macros for reporting
  invalid args
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Libtool is picky about linking against a module library (aka a .so);
giving lots of warnings like this in the tests directory:

  CCLD   networkxml2argvtest

*** Warning: Linking the executable networkxml2argvtest against the loadable module
*** libvirt_driver_network.so is not portable!

Fix that by splitting things into a convenience library which can
be used directly by the tests, and making the real .so just wrap
the convenience library.

Based on a suggestion by Daniel P. Berrange.

* configure.ac (--with-driver-modules): Fix help test.
* src/Makefile.am (libvirt_driver_xen.la, libvirt_driver_libxl.la)
(libvirt_driver_qemu.la, libvirt_driver_lxc.la)
(libvirt_driver_uml.la): Factor into new convenience libraries.
* tests/Makefile.am (xen_LDADDS, qemu_LDADDS, lxc_LDADDS)
(networkxml2argvtest_LDADD): Link to convenience libraries, not
shared libraries.

There was no rule forcing libvirt_qemu_probes.o to be built
before libvirt_qemu_probes.lo was used. Also libvirtd was
still referencing the .o file, rather than the .lo file.

Both the .lo and .o file must be listed as DEPENDENCIES,
otherwise libtool will unhelpfully delete the .o file
once the .lo file is created.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The CoTaskMemFree function requires the ole32 DLL to be
linked against. Currently this is only done for the
VirtualBox driver. Also add it to libvirt_util.la

* configure.ac: Unconditionally add ole32 DLL to Win32
* src/Makefile.am: Link old32 to libvirt_util.la

"accel3d" was specified twice, the second one is obviously "accel2d"
(also from the text down below.

When adding new config file parameters, the corresponding
additions to the augeas lens' are constantly forgotten.
Also there are augeas test cases, these don't catch the
error, since they too are never updated.

To address this, the augeas test cases need to be auto-generated
from the example config files.

* build-aux/augeas-gentest.pl: Helper to generate an
  augeas test file, substituting in elements from the
  example config files
* src/Makefile.am, daemon/Makefile.am: Switch to
  auto-generated augeas test cases
* daemon/test_libvirtd.aug, daemon/test_libvirtd.aug.in,
  src/locking/test_libvirt_sanlock.aug,
  src/locking/test_libvirt_sanlock.aug.in,
  src/lxc/test_libvirtd_lxc.aug,
  src/lxc/test_libvirtd_lxc.aug.in,
  src/qemu/test_libvirtd_qemu.aug,
  src/qemu/test_libvirtd_qemu.aug.in: Remove example
  config file data, replacing with a ::CONFIG:: placeholder
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently all the config options are listed under a 'vnc_entry'
group. Create a bunch of new groups & move options to the
right place
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add nmissing 'host_uuid' entry to libvirtd.conf lens and
rename spice_passwd to spice_password in qemu.conf lens
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of doing

  # example_config

use

  #example_config

so it is possible to programatically uncomment example config
options, as distinct from their comment/descriptions

Also delete rogue trailing comma not allowed by lens
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add an impl of +virGetUserRuntimeDirectory, virGetUserCacheDirectory
virGetUserConfigDirectory and virGetUserDirectory for Win32 platform.
Also create stubs for non-Win32 platforms which lack getpwuid_r()

In adding these two helpers were added virFileIsAbsPath and
virFileSkipRoot, along with some macros VIR_FILE_DIR_SEPARATOR,
VIR_FILE_DIR_SEPARATOR_S, VIR_FILE_IS_DIR_SEPARATOR,
VIR_FILE_PATH_SEPARATOR, VIR_FILE_PATH_SEPARATOR_S

All this code was adapted from GLib2 under terms of LGPLv2+ license.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory

These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

s/daemon-driver-nwilter/daemon-driver-nwfilter/
s/daemon-network/daemon-driver-network/
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When you try to connect to a socket in the abstract namespace,
the error will be ECONNREFUSED for a non-listening daemon. With
the non-abstract namespace though, you instead get ENOENT. Add
a check for this extra errno when auto-spawning the daemon
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Remove a number of pointless checks against PATH_MAX and
add a syntax-check rule to prevent its use in future
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

* configure.ac (AM_PROG_CC_STDC): Stop using this macro.
It provokes warnings from newer automake and is superseded by
autoconf's AC_PROG_CC, which we're already using.

Libtool supports linking directly against .o files on some platforms
(such as Linux), which happens to be the only place where we are
actually doing that (for the dtrace-generated probes.o files).  However,
it raises a big stink about the non-portability, even though we don't
attempt it on platforms where it would actually fail:

  CCLD   libvirt_driver_qemu.la

*** Warning: Linking the shared library libvirt_driver_qemu.la against
the non-libtool
*** objects  libvirt_qemu_probes.o is not portable!

This shuts libtool up by creating a proper .lo file that matches
what libtool normally expects.

* src/Makefile.am (%_probes.lo): New rule.
(libvirt_probes.stp, libvirt_qemu_probes.stp): Simplify into...
(%_probes.stp): ...shorter rule.
(CLEANFILES): Clean new .lo files.
(libvirt_la_BUILT_LIBADD, libvirt_driver_qemu_la_LIBADD)
(libvirt_lxc_LDADD, virt_aa_helper_LDADD): Link against .lo file.
* tests/Makefile.am (PROBES_O, qemu_LDADDS): Likewise.

Add a note about setting the LIBVIRT_DRIVER_DIR env variable,
explain --system and fix example to use --disable-werror

* tests/Makefile.am (valgrind): Use libtool's ability to bypass
libtool wrappers when running valgrind.