Standardize whitespace used in example config files

Instead of doing

  # example_config

use

  #example_config

so it is possible to programatically uncomment example config
options, as distinct from their comment/descriptions

Also delete rogue trailing comma not allowed by lens
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

daemon/libvirtd.conf

@@ -303,10 +303,9 @@
 # Multiple filter can be defined in a single @filters, they just need to be
 # separated by spaces.
 #
-# e.g:
-# log_filters="3:remote 4:event"
-# to only get warning or errors from the remote layer and only errors from
-# the event layer.
+# e.g. to only get warning or errors from the remote layer and only errors
+# from the event layer:
+#log_filters="3:remote 4:event"
 
 # Logging outputs:
 # An output is one of the places to save logging information
@@ -324,9 +323,9 @@
 #    4: ERROR
 #
 # Multiple output can be defined, they just need to be separated by spaces.
-# e.g.:
-# log_outputs="3:syslog:libvirtd"
-# to log all warnings and errors to syslog under the libvirtd ident
+# e.g. to log all warnings and errors to syslog under the libvirtd ident:
+#log_outputs="3:syslog:libvirtd"
+#
 
 # Log debug buffer size: default 64
 # The daemon keeps an internal debug log buffer which will be dumped in case

src/lxc/lxc.conf

@@ -10,7 +10,7 @@
 #
 # This is disabled by default, uncomment below to enable it.
 #
-# log_with_libvirtd = 1
+#log_with_libvirtd = 1
 
 
 # The default security driver is SELinux. If SELinux is disabled
@@ -19,13 +19,13 @@
 # leaving SELinux enabled for the host in general, then set this
 # to 'none' instead.
 #
-# security_driver = "selinux"
+#security_driver = "selinux"
 
 # If set to non-zero, then the default security labeling
 # will make guests confined. If set to zero, then guests
 # will be unconfined by default. Defaults to 0.
-# security_default_confined = 1
+#security_default_confined = 1
 
 # If set to non-zero, then attempts to create unconfined
 # guests will be blocked. Defaults to 0.
-# security_require_confined = 1
+#security_require_confined = 1

src/qemu/qemu.conf

@@ -9,7 +9,7 @@
 # NB, strong recommendation to enable TLS + x509 certificate
 # verification when allowing public access
 #
-# vnc_listen = "0.0.0.0"
+#vnc_listen = "0.0.0.0"
 
 # Enable this option to have VNC served over an automatically created
 # unix socket. This prevents unprivileged access from users on the
@@ -19,7 +19,7 @@
 # a hardcoded 'listen' or 'socket' value. This setting takes preference
 # over vnc_listen.
 #
-# vnc_auto_unix_socket = 1
+#vnc_auto_unix_socket = 1
 
 # Enable use of TLS encryption on the VNC server. This requires
 # a VNC client which supports the VeNCrypt protocol extension.
@@ -29,7 +29,7 @@
 # It is necessary to setup CA and issue a server certificate
 # before enabling this.
 #
-# vnc_tls = 1
+#vnc_tls = 1
 
 
 # Use of TLS requires that x509 certificates be issued. The
@@ -42,7 +42,7 @@
 #
 # This option allows the certificate directory to be changed
 #
-# vnc_tls_x509_cert_dir = "/etc/pki/libvirt-vnc"
+#vnc_tls_x509_cert_dir = "/etc/pki/libvirt-vnc"
 
 
 # The default TLS configuration only uses certificates for the server
@@ -55,7 +55,7 @@
 # Enabling this option will reject any client who does not have a
 # certificate signed by the CA in /etc/pki/libvirt-vnc/ca-cert.pem
 #
-# vnc_tls_x509_verify = 1
+#vnc_tls_x509_verify = 1
 
 
 # The default VNC password. Only 8 letters are significant for
@@ -66,7 +66,7 @@
 # effectively preventing any use of VNC. Obviously change this
 # example here before you set this.
 #
-# vnc_password = "XYZ12345"
+#vnc_password = "XYZ12345"
 
 
 # Enable use of SASL encryption on the VNC server. This requires
@@ -77,7 +77,7 @@
 # It is necessary to configure /etc/sasl2/qemu.conf to choose
 # the desired SASL plugin (eg, GSSPI for Kerberos)
 #
-# vnc_sasl = 1
+#vnc_sasl = 1
 
 
 # The default SASL configuration file is located in /etc/sasl2/
@@ -85,7 +85,7 @@
 # override the configs in this location. Set this parameter to
 # point to the directory, and create a qemu.conf in that location
 #
-# vnc_sasl_dir = "/some/directory/sasl2"
+#vnc_sasl_dir = "/some/directory/sasl2"
 
 
 
@@ -96,7 +96,7 @@
 # NB, strong recommendation to enable TLS + x509 certificate
 # verification when allowing public access
 #
-# spice_listen = "0.0.0.0"
+#spice_listen = "0.0.0.0"
 
 
 # Enable use of TLS encryption on the SPICE server.
@@ -104,7 +104,7 @@
 # It is necessary to setup CA and issue a server certificate
 # before enabling this.
 #
-# spice_tls = 1
+#spice_tls = 1
 
 
 # Use of TLS requires that x509 certificates be issued. The
@@ -117,7 +117,7 @@
 #
 # This option allows the certificate directory to be changed.
 #
-# spice_tls_x509_cert_dir = "/etc/pki/libvirt-spice"
+#spice_tls_x509_cert_dir = "/etc/pki/libvirt-spice"
 
 
 # The default SPICE password. This parameter is only used if the
@@ -127,7 +127,7 @@
 # QEMU, effectively preventing any use of SPICE. Obviously change
 # this example here before you set this.
 #
-# spice_password = "XYZ12345"
+#spice_password = "XYZ12345"
 
 
 # The default security driver is SELinux. If SELinux is disabled
@@ -136,16 +136,16 @@
 # leaving SELinux enabled for the host in general, then set this
 # to 'none' instead.
 #
-# security_driver = "selinux"
+#security_driver = "selinux"
 
 # If set to non-zero, then the default security labeling
 # will make guests confined. If set to zero, then guests
 # will be unconfined by default. Defaults to 1.
-# security_default_confined = 1
+#security_default_confined = 1
 
 # If set to non-zero, then attempts to create unconfined
 # guests will be blocked. Defaults to 0.
-# security_require_confined = 1
+#security_require_confined = 1
 
 # The user ID for QEMU processes run by the system instance.
 #user = "root"
@@ -178,7 +178,7 @@
 # can be mounted in different locations. libvirt will detect
 # where they are located.
 #
-# cgroup_controllers = [ "cpu", "devices", "memory", "blkio", "cpuset", "cpuacct" ]
+#cgroup_controllers = [ "cpu", "devices", "memory", "blkio", "cpuset", "cpuacct" ]
 
 # This is the basic set of devices allowed / required by
 # all virtual machines.
@@ -193,7 +193,7 @@
 #    "/dev/null", "/dev/full", "/dev/zero",
 #    "/dev/random", "/dev/urandom",
 #    "/dev/ptmx", "/dev/kvm", "/dev/kqemu",
-#    "/dev/rtc", "/dev/hpet",
+#    "/dev/rtc","/dev/hpet"
 #]
 
 
@@ -215,14 +215,14 @@
 # the requested compression program can't be found, this falls
 # back to "raw" compression.
 #
-# save_image_format = "raw"
-# dump_image_format = "raw"
+#save_image_format = "raw"
+#dump_image_format = "raw"
 
 # When a domain is configured to be auto-dumped when libvirtd receives a
 # watchdog event from qemu guest, libvirtd will save dump files in directory
 # specified by auto_dump_path. Default value is /var/lib/libvirt/qemu/dump
 #
-# auto_dump_path = "/var/lib/libvirt/qemu/dump"
+#auto_dump_path = "/var/lib/libvirt/qemu/dump"
 
 # When a domain is configured to be auto-dumped, enabling this flag
 # has the same effect as using the VIR_DUMP_BYPASS_CACHE flag with the
@@ -230,7 +230,7 @@
 # file system cache while writing the dump file, but may cause
 # slower operation.
 #
-# auto_dump_bypass_cache = 0
+#auto_dump_bypass_cache = 0
 
 # When a domain is configured to be auto-started, enabling this flag
 # has the same effect as using the VIR_DOMAIN_START_BYPASS_CACHE flag
@@ -238,7 +238,7 @@
 # avoid using the file system cache when restoring any managed state
 # file, but may cause slower operation.
 #
-# auto_start_bypass_cache = 0
+#auto_start_bypass_cache = 0
 
 # If provided by the host and a hugetlbfs mount point is configured,
 # a guest may request huge page backing.  When this mount point is
@@ -250,20 +250,20 @@
 # NB, within this mount point, guests will create memory backing files
 # in a location of  $MOUNTPOINT/libvirt/qemu
 #
-# hugetlbfs_mount = "/dev/hugepages"
+#hugetlbfs_mount = "/dev/hugepages"
 
 
 # mac_filter enables MAC addressed based filtering on bridge ports.
 # This currently requires ebtables to be installed.
 #
-# mac_filter = 1
+#mac_filter = 1
 
 
 # By default, PCI devices below non-ACS switch are not allowed to be assigned
 # to guests. By setting relaxed_acs_check to 1 such devices will be allowed to
 # be assigned to guests.
 #
-# relaxed_acs_check = 1
+#relaxed_acs_check = 1
 
 
 # QEMU implements an extension for providing audio over a VNC connection,
@@ -273,7 +273,7 @@
 # permissions issues. Enabling this option will make libvirtd honor the
 # QEMU_AUDIO_DRV environment variable when using VNC.
 #
-# vnc_allow_host_audio = 0
+#vnc_allow_host_audio = 0
 
 
 # If clear_emulator_capabilities is enabled, libvirt will drop all
@@ -283,7 +283,7 @@
 # Warning: Disabling this option means that a compromised guest can
 # exploit the privileges and possibly do damage to the host.
 #
-# clear_emulator_capabilities = 1
+#clear_emulator_capabilities = 1
 
 
 # If allow_disk_format_probing is enabled, libvirt will probe disk
@@ -295,7 +295,7 @@
 # guest XML <disk> elements to include  <driver type='XXXX'/>
 # elements instead of enabling this option.
 #
-# allow_disk_format_probing = 1
+#allow_disk_format_probing = 1
 
 
 # If enabled, libvirt will have QEMU set its process name to
@@ -305,7 +305,7 @@
 # its process title, so the complete QEMU command (emulator and
 # its arguments) appear in process listings.
 #
-# set_process_name = 1
+#set_process_name = 1
 
 
 # If max_processes is set to a positive integer, libvirt will use
@@ -314,21 +314,21 @@
 # The same applies to max_files which sets the limit on the maximum
 # number of opened files.
 #
-# max_processes = 0
-# max_files = 0
+#max_processes = 0
+#max_files = 0
 
 # To enable 'Sanlock' project based locking of the file
 # content (to prevent two VMs writing to the same
 # disk), uncomment this
 #
-# lock_manager = "sanlock"
+#lock_manager = "sanlock"
 
 # Set limit of maximum APIs queued on one domain. All other APIs
 # over this threshold will fail on acquiring job lock. Specially,
 # setting to zero turns this feature off.
 # Note, that job lock is per domain.
 #
-# max_queued = 0
+#max_queued = 0
 
 ###################################################################
 # Keepalive protocol: