Add the ability to support VLAN tags for Open vSwitch virtual port
types. To accomplish this, modify virNetDevOpenvswitchAddPort and
virNetDevTapCreateInBridgePort to take a virNetDevVlanPtr
argument. When adding the port to the OVS bridge, setup either a
single VLAN or a trunk port based on the configuration from the
virNetDevVlanPtr.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>

virNetDevVPortProfile has (had) a type field that can be set to one of
several values, and a union of several structs, one for each
type. When a domain's interface object is of type "network", the
domain config may not know beforehand which type of virtualport is
going to be provided in the actual device handed down from the network
driver at runtime, but may want to set some values in the virtualport
that may or may not be used, depending on the type. To support this
usage, this patch replaces the union of structs with toplevel fields
in the struct, making it possible for all of the fields to be set at
the same time.

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.

OOM conditions silently returned failure.

This patch will allow OpenFlow controllers to identify which interface
belongs to a particular VM by using the Domain UUID.

ovs-vsctl get Interface vnet0 external_ids
{attached-mac="52:54:00:8C:55:2C", iface-id="83ce45d6-3639-096e-ab3c-21f66a05f7fa", iface-status=active, vm-id="142a90a7-0acc-ab92-511c-586f12da8851"}

V2 changes:
Replaced vm-uuid with vm-id. There was a discussion in Open vSwitch
mailinglist that we should stick with the same DB key postfixes for the
sake of consistency (e.g iface-id, vm-id ...).

The indentation on the final lines of the function was off by four
spaces, making me wonder for a second if there was something
missing. (There wasn't.)

This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
        <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

or if libvirt should auto-generate the interfaceid use
following syntax:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

It is also possible to pass an optional profileid. To do that
use following syntax:

   <interface type='bridge'>
     <source bridge='ovsbr'/>
     <mac address='00:55:1a:65:a2:8d'/>
     <virtualport type='openvswitch'>
       <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
                   profileid='test-profile'/>
     </virtualport>
   </interface>

To create Open vSwitch bridge install Open vSwitch and
run the following command:

    ovs-vsctl add-br ovsbr