- 27 4月, 2017 24 次提交
-
-
由 John Ferlan 提交于
Rather than waiting for the first save to fail, let's generate the directory with the correct privs during initialization. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
There's no need to separate, so just have one. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Rather than overloading one function - split apart the logic to have separate interfaces and local/private structures to manage the data for which the helper is collecting. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Makes it a bit more clear what it is. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Rather than 'nuuids' it should be 'maxuuids' and rather than 'got' it should be 'nuuids'. Alter the logic of the list traversal to utilize those names. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Rather than using "ret = -1" and cleanup processing, alter the return path on failure to goto error and then just return the data.got. In the error path, we no longer check for ret < 0, we just can free anything added to the array and return -1 directly. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Rather than dereferencing obj->def->X, create a local 'def' variable that will dereference the def and use directly. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
When processing a virSecretPtr use 'secret' as a variable name. When processing a virSecretObjPtr use 'obj' as a variable name. When processing a virSecretDefPtr use 'def' as a variable name, unless a distinction needs to be made with a 'newdef' such as virSecretObjListAddLocked (which also used the VIR_STEAL_PTR macro for the configFile and base64File). Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Rather than have the caller check if !obj before calling, just check in the function for !obj and return. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Make various virSecretObjList*Locked functions static and make virSecretObjNew static since they're only called within virtsecretobj.c. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Only save the config when using a generated UUID if we were able to create an object for the def. There could have been "other reasons" for the assignment to fail, so saving the config could be incorrect. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Rather than "wait" for the first config file to be created, force creation of the configDir during driver state initialization. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Essentially virNWFilterSaveDef executed in a different order the same sequence of calls, so let's just make one point of reference. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Remove open coded helper. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Rather than separate calls, use a common call and generate a better error message which includes the incorrect uuidstr. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Move from virnwfilterobj.h to virnwfilterobj.c. Create the virNWFilterObjListNew() API in order to allocate. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Prefix should have been virNWFilterObjList since the API is operating on the list of filters. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Perform the object initialization in a helper rather than inline. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Move the structure to virnwfilterobj.c and create necessary accessor API's for the various fields. Also make virNWFilterObjFree static since there's no external callers. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
It is what it is anyway, so let's describe it that way too. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
It was only ever set to false, which is ironically the default. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Rather than dereferencing obj->def->XXX or nwfilters->objs[i]->X create local virNWFilterObjPtr and virNWFilterDefPtr variables. Future adjustments will be privatizing the object more, so this just prepares the code for that reality. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
When processing a virNWFilterPtr use 'nwfilter' as a variable name. When processing a virNWFilterObjPtr use 'obj' as a variable name. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Cédric Bosdonnat 提交于
If several RA routes are found for the same device, only list that device once in the error message.
-
- 26 4月, 2017 16 次提交
-
-
由 Ján Tomko 提交于
Format the attributes in a separate buffer and only print the element if it's not empty.
-
由 Ján Tomko 提交于
Make adding new attributes easier.
-
由 Ján Tomko 提交于
Eliminate the big condition at the start. Instead use a buffer and only format the element if the buffer is non-empty.
-
由 Ján Tomko 提交于
Instead of figuring out upfront whether <input> will be a single or a pair element, format the subelements into a separate buffer and close <input/> early if this buffer is empty.
-
由 Erik Skultety 提交于
There's lot more to document about the nodedev driver, besides PCI and SR-IOV (even this might need to be extended), but let's start small-ish and at least have a page for it linked from the drivers.html. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1439132 During 'matrix' testing of all possible combinations I found that if device is formated with "gpt" first, then an attempt is made to format using "mac", a startup will fail. Deeper analysis by Peter Krempa indicates that the "mac" table fits into the first block on the disk. Since the GPT disklabel is stored at LBA address 1 it is not overwritten at all. Thus it's apparent that the (blkid) detection tool then prefers GPT over a older disklabel. The GPT disklabel has also a secondary copy at the last LBA of the disk. So, follow the same logic as the logical pool in clearing a 1MB swath at the beginning and end of the device to avoid potential issues with larger sector sizes for the device. Also fixed a minor formatting nit in virStorageBackendDeviceIsEmpty call.
-
由 John Ferlan 提交于
Since a sector size may be larger than 512 bytes, let's just increase the size to wipe to 1MB rather than 2KB
-
由 John Ferlan 提交于
Rather than open code it, use the new function which uses the wipe algorithm in order to zero the front and tail of the partition.
-
由 John Ferlan 提交于
Create a wrapper/helper that can be used to call the storage backend wipe helper - storageBackendVolWipeLocalFile for future use by logical and disk backends to clear out the partition table rather than having each open code the same algorithm.
-
由 John Ferlan 提交于
Add bool 'zero_end' and logic that would allow a caller to wipe specific portions of a target device either from the beginning (the default) or from the end when zero_end is true. This will allow for this code to wipe out partition table information from a device.
-
由 Daniel P. Berrange 提交于
There were a few bugs in keycodemap tool that broke it when run on python circa 2.7.5 or older, which affected RHEL builds. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
A long time ago we imported the keymaps.csv file from GTK-VNC so we can do conversions between keycode sets. Meanwhile lots of bug fixes have gone into this CSV file and libvirt hasn't kept in sync. The keymaps.csv file and associated generator script has been pulled out of GTK-VNC into a dedicated GIT repo for use as a submodule. This allows GTK-VNC, SPICE-GTK, QEMU and libvirt to share the same master database and tools and pushing updates merely requires a submodule commit update as with gnulib. The test suite is updated to cover some extra boundary conditions. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 John Ferlan 提交于
Shorten the time needed to keep the list lock and alter the cleanup path to be more of an error path. Utilize the the virObjectListFree function to handle the calls for virObjectUnref on each list element and the VIR_FREE of the list instead of open coding it. Change the name of the virHashForEach callback to match the name of the Export function with the Callback added onto it. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Rather than have caller need to do it, have the object returned locked. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Alter the prototypes to use the newer formatting style Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-