The internal virHostPMCapability enum just duplicates the
public virNodeSuspendTarget enum, but with different names.

* src/util/util.c: Use VIR_NODE_SUSPEND_TARGET constants
* src/util/util.h: Remove virHostPMCapability enum
* src/conf/capabilities.c: Use VIR_NODE_SUSPEND_TARGET_LAST

The VIR_NODE_SUSPEND_TARGET constants are not flags, so they
should just be assigned straightforward incrementing values.

* include/libvirt/libvirt.h.in: Change VIR_NODE_SUSPEND_TARGET
  values
* src/util/virnodesuspend.c: Fix suspend target checks

Detected by Coverity. the only case is caller passes a NULL to 'format' variable,
then taking 'if (format)' false branch, the function qcow2GetBackingStoreFormat
will directly dereferences the NULL 'format' pointer variable.
Signed-off-by: NAlex Jia <ajia@redhat.com>

Fix cmdDomblklist to return 'true' on success instead of '0'

https://bugzilla.redhat.com/show_bug.cgi?id=758590Signed-off-by: NAlex Jia <ajia@redhat.com>

This patch add new pulic API virDomainSetBlockIoTune and
virDomainGetBlockIoTune.
Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Implement setting/getting per-device blkio weights in qemu,
using the cgroups blkio.weight_device tunable.

This adds per-device weights to <blkiotune>.  Note that the
cgroups implementation only supports weights per block device,
and not per-file within the device; hence this option must be
global to the domain definition rather than tied to individual
<devices>/<disk> entries:

<domain ...>
  <blkiotune>
    <device>
      <path>/path/to/block</path>
      <weight>1000</weight>
    </device>
  </blkiotune>
..

This patch also adds a parameter --device-weights to virsh command
blkiotune for setting/getting blkiotune.weight_device for any
hypervisor that supports it.  All <device> entries under
<blkiotune> are concatenated into a single string attribute under
virDomain{Get,Set}BlkioParameters, named "device_weight".
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Without this,  'virsh blkiotune --live --config --weight=n'
only affected live.

* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters): Allow
setting both configurations at once.

After the previous patch, there are now some redundant checks.

* src/qemu/qemu_driver.c (qemudDomainGetVcpuPinInfo)
(qemuGetSchedulerParametersFlags): Drop checks now guaranteed by
libvirt.c.
* src/lxc/lxc_driver.c (lxcGetSchedulerParametersFlags):
Likewise.

Drivers were inconsistent when presented both --live and --config
at once.  For example, within qemu, getting memory parameters
favored live, getting blkio tuning favored config, and getting
scheduler parameters errored out.  Also, some, but not all,
attempts to mix flags on query were filtered at the virsh level.
We shouldn't have to duplicate efforts in every client app, nor
in every driver.  So, it is simpler to just enforce that the two
flags cannot both be used at once on query operations, which has
precedent in libvirt.c, and which matches the documentation of
virDomainModificationImpact.

* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainGetBlkioParameters)
(virDomainGetSchedulerParametersFlags, virDomainGetVcpuPinInfo):
Borrow sanity checking from virDomainGetVcpusFlags.

* src/remote_protocol-structs: Use correct RPC name.

Pushed under build failure rule.

It requires the domain is running, otherwise fails. Resize to a lower
size is supported, but should be used with extreme caution.

In order to prohibit the "size" overflowing after multiplied by
1024. We do checking in the codes. For QMP mode, the default units
is Bytes, the passed size needs to be multiplied by 1024, however,
for HMP mode, the default units is "Megabytes", the passed "size"
needs to be divided by 1024 then.

Implements functions for both HMP and QMP mode.

For HMP mode, qemu uses "M" as the units by default, so the passed "sized"
is divided by 1024.

For QMP mode, qemu uses "Bytes" as the units by default, the passed "sized"
is multiplied by 1024.

All of the monitor functions return -1 on failure, 0 on success, or -2 if
not supported.

The new API is named as "virDomainBlockResize", intending to add
support for qemu monitor command "block_resize" (both HMP and QMP).

Similar with APIs like "virDomainSetMemoryFlags", the units for
argument "size" is kilobytes.

 * s/-connection/-c/
 * Removes the redundant '/'.
 * Add "absolute" so that it's more clear.

Pushed under trivial rule.

Add a new command 'nodesuspend' to perform a timed suspend on the host.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>

Add the core functions that implement the functionality of the API.
Suspend is done by using an asynchronous mechanism so that we can return
the status to the caller before the host gets suspended. This asynchronous
operation is achieved by suspending the host in a separate thread of
execution. However, returning the status to the caller is only best-effort,
but not guaranteed.

To resume the host, an RTC alarm is set up (based on how long we want to
suspend) before suspending the host. When this alarm fires, the host
gets woken up.

Suspend-to-RAM operation on a host running Linux can take upto more than 20
seconds, depending on the load of the system. (Freezing of tasks, an operation
preceding any suspend operation, is given up after a 20 second timeout).
And Suspend-to-Disk can take even more time, considering the time required
for compaction, creating the memory image and writing it to disk etc.
So, we do not allow the user to specify a suspend duration of less than 60
seconds, to be on the safer side, since we don't want to prematurely declare
failure when we only had to wait for some more time.

Implement the remote protocol for virNodeSuspendForDuration() API.

Implement the public definitions for the new API
virNodeSuspendForDuration() which will be subsequently used to
do a timed suspend on the host.

Some systems support a feature known as 'Hybrid-Suspend', apart from the
usual system-wide sleep states such as Suspend-to-RAM (S3) or Suspend-to-Disk
(S4). Add the functionality to discover this power management feature and
export it in the capabilities XML under the <power_management> tag.

When another thread was dispatching while we wanted to send a
non-blocking call, we correctly queued the call and woke up the thread
but the thread just threw the call away since it forgot to recheck if
its socket was writable.

If both nodes do not have any children, we pass zero to
virBitmapAlloc which returns NULL. In turn we report OOM error
and return false (meaning nodes are different). This is not true.

When spawning an ssh connection, the environment variables
DISPLAY, SSH_ASKPASS, ... are passed. However XAUTHORITY,
which is necessary if the .Xauthority is in a non default
place, was not passed.
Signed-off-by: NChristian Franke <nobody@nowhere.ws>

virt-xml-validate fails when run on a domain XML file of type 'vbox'.

For failing test case, see https://bugzilla.redhat.com/show_bug.cgi?id=757097

This patch updates the XML schema to accept all valid hypervisor
types, as well as dropping hypervisor types that are not in use
by the current code base.
Signed-off-by: NEric Blake <eblake@redhat.com>

When user pass wrong root element, it is not 'internal error' and
we can give him hint what we are expecting.

To make lxcSetContainerResources smaller, pull the mem tune
and device ACL setup code out into separate methods

* src/lxc/lxc_controller.c: Introduce lxcSetContainerMemTune
  and lxcSetContainerDeviceACL

* src/lxc/lxc_controller.c: Refactor setting of initial blkio
  tuning parameters
* src/lxc/lxc_driver.c: Enable live change of blkio tuning

* src/lxc/lxc_driver.c: Support changing quota/period for LXC
  containers
* src/lxc/lxc_controller.c: Set initial quota/period at startup

While LXC does not have the concept of VCPUS, so we can't do
per-VCPU pCPU placement, we can support the VM level CPU
placement. Todo this simply set the CPU affinity of the LXC
controller at startup. All child processes will inherit this
affinity.

* src/lxc/lxc_controller.c: Set process affinity

Use numactl to set NUMA memory placement for LXC containers

* src/lxc/lxc_controller.c: Support NUMA memory placement

This partly reverts my previous patch f88de3eb. We need to
get file status after open, as given path could have been symlink,
so fstat() will operate on different file than lstat().

When aligning you need to clear the bits in the mask and leave the
others aside.  Likely this code has never run, and will never run.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If pool directory contains special files like FIFO or sockets
we want to skip those on pool-start or pool-refresh otherwise
open() will get an error.

One of my latest patches 2e37bf42
copy serial console definition. On domain shutdown we save this
info into state XML. However, later on the daemon start we simply
drop this info and since we are not re-reading qemu log,
vm->def->consoles[0] does not get populated with copy. Therefore
we need to avoid dropping console definition if it is just alias
for serial console.