- 02 9月, 2009 16 次提交
-
-
由 Daniel P. Berrange 提交于
* libvirt.spec.in: Conditionalize glusterfs requires line for Fedora >= 11, since other distros don't have it available
-
由 Daniel P. Berrange 提交于
* src/storage_encryption_conf.c: Remove base64.h
-
由 Daniel P. Berrange 提交于
-
由 Miloslav Trmač 提交于
* src/qemu_driver.c: Support arbitrary callbacks for "secondary prompts". Reimplement qemudMonitorCommandExtra using such a callback.
-
由 Miloslav Trmač 提交于
The if ((nlptr...)) implicitly assumes commptr != NULL (and that "buf" starts with "cmd"). Make the assumption explicit, it will be broken in a future patch. * src/qemu_driver.c: Don't assume buffered monitor output echoes the command.
-
由 Miloslav Trmač 提交于
The XML allows <encryption format='unencrypted'/>, this implementation canonicalizes the internal representation so that "disk->encryption" is non-NULL iff encryption information is available. A domain with partial encryption information can be defined, completeness of the information is not verified. The domain won't start until the remaining information is added, of course. * docs/formatdomain.html, docs/formatdomain.html.in: Document new encryption options for disks * docs/schemas/domain.rng: Pull in storage encryption schema rules * src/domain_conf.h, src/domain_conf.c: Wire up storage encryption XML parsing/formatting APIs
-
由 Miloslav Trmač 提交于
Supports only virStorageVolCreateXML, not virStorageVolCreateXMLFrom. Curiously, qemu-img does not need the passphrase for anything to create an encrypted volume. This implementation thus does not need to touch any secrets to work with cooperating clients. More generic passphrase handling is added in the next patch. * src/storage_backend.c: Request encryption when creating qcow/qcow2 files * src/storage_backend_disk.c, src/storage_backend_fs.c, src/storage_backend_logical.c: Refuse to create volumes with encryption params set.
-
由 Miloslav Trmač 提交于
(The implementation is not very generic, but that can be very easily rectified if/when new encryption formats appear.) * src/storage_backend_fs.c: Probe for qcow/qcow2 encryption algorithm field
-
由 Miloslav Trmač 提交于
The XML allows <encryption format='unencrypted'/>, this implementation canonicalizes the internal representation so that "vol->encryption" is non-NULL iff the volume is encrypted. Note that partial encryption information (e.g. specifying an encryption format, but not the key/passphrase) is valid, libvirt will automatically choose value for the missing information during volume creation. The user can read the volume XML, and use the unmodified <encryption> tag in future operations (without having to be able to understand) its contents. * docs/formatstorage.html, docs/formatstorage.html.in: Document storage volume encryption options * src/storage_conf.c, src/storage_conf.h: Hook up storage encryption XML handling * tests/storagevolschemadata/vol-qcow2.xml: Test case for encryption schema changes
-
由 Miloslav Trmač 提交于
Define an <encryption> tag specifying volume encryption format and format-depenedent parameters (e.g. passphrase, cipher name, key length, key). Currently the only defined parameter is a reference to a "secret" (passphrase/key) managed using the virSecret* API. Only the qcow/qcow2 encryption format, and a "default" format used to let libvirt choose the format during volume creation, is currently supported. This patch does not add any users; the <encryption> tag is added in the following patches to both volumes (to support encrypted volume creation) and domains. * docs/*.html: Re-generate * docs/formatstorageencryption.html.in, docs/sitemap.html.in: Add page describing storage encryption data format * docs/schemas/Makefile.am, docs/schemas/storageencryption.rng: Add RNG schema for storage encryption format * po/POTFILES.in: Add src/storage_encryption_conf.c * src/libvirt_private.syms: Export virStorageEncryption* functions * src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal helper APIs for dealing with storage encryption format * libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng RNG schema
-
由 Miloslav Trmač 提交于
Sample session: >>> import libvirt >>> c = libvirt.open('qemu:///session') >>> c.listSecrets() ['12247729-47d2-a783-88ce-b329d4781cd3', 'reee', 'abc'] >>> s = c.secretDefineXML("<secret ephemeral='no' private='no'>\n<description>Something for use</description>\n<volume>/foo/bar</volume>\n</secret>\n") >>> s.UUIDString() '340c2dfb-811b-eda8-da9e-25ccd7bfd650' >>> s.XMLDesc() "<secret ephemeral='no' private='no'>\n <uuid>340c2dfb-811b-eda8-da9e-25ccd7bfd650</uuid>\n <description>Something for use</description>\n <volume>/foo/bar</volume>\n</secret>\n" >>> s.setValue('abc\0xx\xffx') 0 >>> s.value() 'abc\x00xx\xffx' >>> s.undefine() 0 * python/generator.py: Add rules for virSecret APIs * python/libvir.c, python/libvirt-python-api.xml: Manual impl of virSecretSetValue, virSecretGetValue$ and virConnectListSecrets APIs * python/libvirt_wrap.h, python/types.c: Wrapper for virSecret objects * docs/libvirt-api.xml, docs/libvirt-refs.xml, docs/html/libvirt-virterror.html, docs/html/libvirt-libvirt.html, docs/devhelp/libvirt-virterror.html, docs/devhelp/libvirt-libvirt.html: Re-generate with 'make api'
-
由 Miloslav Trmač 提交于
* src/remote_internal.c: Implement client binding for new secrets APIs * src/datatypes.h: Add 'void *secretPrivateData' to virConnectPtr struct
-
由 Miloslav Trmač 提交于
* qemud/remote_protocol.x: Define wire protocol for secrets public APIs * qemud/remote_protocol.h, qemud/remote_protocol.c, qemud/remote_dispatch_table.h, qemud/remote_dispatch_ret.h, qemud/remote_dispatch_prototypes.h, qemud/remote_dispatch_args.h: Re-generate from updated protocol definition * qemud/remote.c: Implement RPC dispatchers for new secrets APIs
-
由 Miloslav Trmač 提交于
* include/libvirt/virterror.h, src/virterror.c: Add VIR_ERR_INVALID_SECRET and VIR_FROM_SECRET * src/libvirt.c: Define stubs for every new public API
-
由 Miloslav Trmač 提交于
* include/libvirt/virterror.h, src/virterror.c: Add VIR_WAR_NO_SECRET * src/libvirt_private.syms, src/datatypes.h, src/datatypes.c: Type virSecret struct definition and helper APIs * src/driver.h: Sub-driver API definitions for secrets * src/libvirt.c: Define new sub-driver for secrets
-
由 Miloslav Trmač 提交于
This patch adds a "secret" as a separately managed object, using a special-purpose API to transfer the secret values between nodes and libvirt users. * docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new schema for virSecret objects * docs/*html: Re-generated * docs/formatsecret.html.in, docs/sitemap.html.in: Add page describing the virSecret XML schema * include/libvirt/libvirt.h.in: Define the new virSecret public API * src/libvirt_public.syms: Export symbols for new public APIs * mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to files list
-
- 01 9月, 2009 5 次提交
-
-
由 Daniel Veillard 提交于
* po/*: and update the po set
-
由 Charles Duffy 提交于
Per prior discussion -- this was, indeed, trivial. I'm a little disappointed to be breaking the ordering characteristics of the enum (as it had been ordered by increasing time requirements and decreasing output size), but breaking any save files with the old constants in the headers would of course be worse. >From 2a9cdcfc88de091a8d34aa3fc3b1208d7681790e Mon Sep 17 00:00:00 2001 From: Charles Duffy <Charles_Duffy@dell.com> Date: Fri, 28 Aug 2009 11:49:54 -0500 Subject: [PATCH] support lzop save compression for qemu One of the larger disincentives towards use of compression for migrated-out save files is performance impact. This patch adds support for lzop; CPU time for compression is about 5x faster than gzip (the next most performant algorithm) and decompression is about 3x faster. Signed-off-by: NCharles Duffy <Charles_Duffy@dell.com> Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
All of the other drivers that support the getMaxVcpus callback also accept a NULL value for type. Make openvz also accept a NULL value. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
qemudExtractMonitorPath() was doing a VIR_ALLOC_N followed by a strncpy. However, this isn't necessary; we can do the same thing using strndup, which is much safer. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
The documentation for virNodeGetCellsFreeMemory claims the values returned are in kilobytes, but that's actually wrong; the value returned is actually in bytes. Fix up the documentation to be correct. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 30 8月, 2009 1 次提交
-
-
由 Jim Fehlig 提交于
S-expression containing empty lists, e.g. (cpus (() () () ())), was not being handled properly in sexpr2string() serialization. Emit an empty list when encountering NIL sexpr kind.
-
- 28 8月, 2009 2 次提交
-
-
由 Daniel P. Berrange 提交于
* src/uml_driver.c: Fix numa API driver entries to avoid infinite loop
-
由 Pritesh Kothari 提交于
* src/virsh.c: Pass in pool object to avoid crash in key lookup
-
- 26 8月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* src/remote_internal.c: Split remoteAuthPolkit into separate impls for v0 and v1 to avoid compile warnings due to unused variables/params * qemud/remote.c: Remove accidental tabs
-
- 25 8月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* configure.in: Check for pkcheck which indicates new policykit * qemud/Makefile.am: Install different versions of policy * qemud/libvirtd.policy: Rename to libvirtd.policy-0 * qemud/libvirtd.policy-1: new style policy * qemud/qemud.c, qemud/qemud.h, qemud/remote.c: Support new policykit API via external pkcheck helper * src/remote_internal.c: Don't prompt for polkit auth with new policykit API * libvirt.spec.in: deal with new policy install locations & deps
-
- 21 8月, 2009 2 次提交
-
-
由 Darryl L. Pierce 提交于
* src/security_selinux.c: ignores EOPNOTSUPP when attempting to access an NFS share
-
-
- 20 8月, 2009 5 次提交
-
-
由 Mattias Bolte 提交于
Matthias correctly points out that escape_specialcharaters() takes a length, and since we are now malloc()'ing string in phypOpen instead of making it a static array, we can't use sizeof(string) anymore. Calculate the proper strlen and then use that both to allocate the string and also pass it to escape_specialcharacters(). Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Mattias Bolte 提交于
I came across this line in the phypOpen function: char string[strlen(conn->uri->path)]; Here the path part of the given URI is used without checking it for NULL, this can cause a segfault as strlen expects a string != NULL. Beside that uuid_db and connection_data leak in case of an error. In this line conn->uri->path = string; the original path of the URI leaks. The patch adds a VIR_FREE call before setting the new path. The attached patch is compile-tested but I don't have a Power Hypervisor installation at hand to test it for real. Matthias Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
Fix up a small memory leak pointed out by DanB; I was forgetting to release memory allocated to driver->saveImageFormat. Also add the "save_image_format" and "security" entries to the augeas lens. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Daniel P. Berrange 提交于
Test case for the fix applied in commit 14435163 Author: Daniel Veillard <veillard@redhat.com> Date: Fri Jun 26 18:14:16 2009 +0000 * tests/sexpr2xmldata/sexpr2xml-pv-vfb-type-crash.sexpr, tests/sexpr2xmldata/sexpr2xml-pv-vfb-type-crash.xml: Data files exhibiting the crash * tests/sexpr2xmltest.c: Process new data files
-
由 Daniel P. Berrange 提交于
-
- 19 8月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* docs/drvqemu.html.in: Document DAC usage, SELinux integration, Linux capabilities, and Cgroups device ACLs
-
- 18 8月, 2009 6 次提交
-
-
由 Mark McLoughlin 提交于
* src/qemu_conf.c, src/uml_conf.c: use virReportSystemError() to report system errors
-
由 Mark McLoughlin 提交于
https://bugzilla.redhat.com/517371 Matt Booth points out that if you use a non-existent bridge name when start a guest you get a weird error message: Failed to add tap interface 'vnet%d' to bridge 'virbr0' and dev='vnet%d' appears in the dumpxml output. Fix that by not including 'vnet%d' in the error message and freeing the 'vnet%d' string if adding the tap device to the bridge fails. * src/qemu_conf.c, src/uml_conf.c: fix qemudNetworkIfaceConnect() and umlConnectTapDevice() to not expose 'vnet%d' to the user
-
由 Mark McLoughlin 提交于
As we start/shutdown guests, or hotplug/hot-unplug devices, we can add or delete devices as appropriate from a list of active devices. Then, in pciReset(), we can use this to determine whether its safe to reset a device as a side effect of resetting another device. * src/qemu_conf.h: add activePciHostdevs to qemud_driver * src/qemu_driver.c: maintain the activePciHostdevs list, and pass it to pciResetDevice() * src/pci.[ch]: pass the activeDevs list to pciResetDevice() and use it to determine whether a Secondary Bus Reset is safe
-
由 Mark McLoughlin 提交于
The qemuPrepareHostDevices() and qemuDomainReAttachHostDevices() functions are clutter with a bunch of calls to pciGetDevice() and pciFreeDevice() obscuring the basic logic. Add a pciDeviceList type and add a qemuGetPciHostDeviceList() function to build a list from a domain definition. Use this in prepare/re-attach fto simplify things and eliminate the multiple pciGetDevice calls. This is especially useful because in the next patch we need to iterate the hostdevs list a third time and we also need a list type for keeping track of active devices. * src/pci.[ch]: add pciDeviceList type and also a per-device 'managed' property * src/libvirt_private.syms: export the new functions * src/qemu_driver.c: add qemuGetPciHostDeviceList() and re-write qemuPrepareHostDevices() and qemuDomainReAttachHostDevices() to use it
-
由 Mark McLoughlin 提交于
Newer versions of QEMU accept 'pci_add auto', but older versions require 'pci_add pci_addr=auto' * src/qemu_driver.c: use pci_addr= in qemudDomainAttachHostPciDevice() for older versions of QEMU
-
由 Mark McLoughlin 提交于
* src/qemu_driver.c: Add missing break statement in qemudDomainDetachHostDevice()
-