Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329819
(cherry picked from commit 3a703b81)

QEMU_BLOCK_IOTUNE_MAX is the maximum inclusively, so let's modify the
message so it makes sense.

https://bugzilla.redhat.com/show_bug.cgi?id=1329041Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 72c313bc)

Currently we only allow /dev/random and /dev/hwrng as host input
for <rng><backend model='random'/> device. This was added after
various upstream discussions in commit 4932ef45

However this restriction has generated quite a few complaints over
the years, so a new discussion was initiated:

http://www.redhat.com/archives/libvir-list/2016-April/msg00987.html

Several people suggested removing the restriction, and nobody really
spoke up to defend it. So this patch drops the path restriction
entirely

https://bugzilla.redhat.com/show_bug.cgi?id=1074464
(cherry picked from commit 67f2b727)

We presently don't give any indication if the VirtualBox version
isn't in our support whitelist.

(cherry picked from commit 18644491)

The values are currently limited to LLONG_MAX which causes some
problems.  QEMU conveniently changed their maximum to 1e15 (1 PB) which
is enough for some time and we need to adapt to that so that we don't
throw "Unknown error" messages.  Strictly limiting these values actually
fixes some corner case values (off-by-one checks in QEMU probably).

Since values out of the new specified range do not overflow anything,
change the type of error as well.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 2d04f6de)

$ echo -n 'log_level=1' > ~/.config/libvirt/libvirtd.conf
$ libvirtd --timeout=10
2014-10-10 10:30:56.394+0000: 6626: info : libvirt version: 1.1.3.6, package: 1.fc20 (Fedora Project, 2014-09-08-17:50:42, buildvm-05.phx2.fedoraproject.org)
2014-10-10 10:30:56.394+0000: 6626: error : main:1261 : Can't load config file: configuration file syntax error: /home/rjones/.config/libvirt/libvirtd.conf:1: expecting a value: /home/rjones/.config/libvirt/libvirtd.conf

Rather than try to fix this in the depths of the parser, just catch
the case when a config file doesn't end in a newline, and manually
append a newline to the content before parsing

https://bugzilla.redhat.com/show_bug.cgi?id=1151409
(cherry picked from commit 3cc2a9e0)

According to the dnsmasq manpage, the netmask for IPv4 address ranges
will be auto-deteremined from the interface dnsmasq is listening on,
but it can't do this for IPv6 for some reason - it instead assumes a
network prefix of 64 for all IPv6 address ranges. If this is
incorrect, dnsmasq will refuse to give out an address to clients,
instead logging this message:

 dnsmasq-dhcp[2380]: no address range available for DHCPv6 request via virbr0

The solution is for libvirt to add ",$prefix" to all IPv6 dhcp-range
arguments when building the dnsmasq.conf file.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1033739
(cherry picked from commit bf3d9f30)

FD passing APIs like CreateXMLWithFiles or OpenGraphicsFD will leak
file descriptors. The user passes in an fd, which is dup()'d in
virNetClientProgramCall. The new fd is what is transfered to the
server virNetClientIOWriteMessage.

Once all the fds have been written though, the parent msg->fds list
is immediately free'd, so the individual fds are never closed.

This closes each FD as its send to the server, so all fds have been
closed by the time msg->fds is free'd.

https://bugzilla.redhat.com/show_bug.cgi?id=1159766
(cherry picked from commit 5ba48584)

My commit 0d157957 crashes on a URI without a scheme, like via
'virsh --connect frob'

Add a check on uri->server too while we are at it, and centralize
them all

(cherry picked from commit f1bae376)

My commit 6879be48 moved the addition of the implicit video device
from the XML parser to the PostParse function, but did not regenerate
all the tests.

(cherry picked from commit 4b35a715)

virsh vol-clone is expected to clone a volume within a single
pool; it doesn't work for cloning across pools. Clarify the docs

https://bugzilla.redhat.com/show_bug.cgi?id=1103714
(cherry picked from commit 2f1dc3de)

VIR_ERR_NO_SUPPORT maps to the error string

    this function is not supported by the connection driver

and is largely only used for when a driver doesn't have any
implementation for a public API. So its usage with invalid
net-update requests is a bit out of place. Instead use
VIR_ERR_OPERATION_UNSUPPORTED which maps to:

    Operation not supported

And is what qemu's hotplug routines use in similar scenarios

(cherry picked from commit cdb4caac)

This reverts commit 1e9808d3.

We shouldn't advertise libvirtd.socket activation, since currently
it means VM/network/... autostart won't work as expected.

We tried to find a middle ground by installing the config file without
an [Install] section, since systemd won't allow .socket to be enabled
without one... or at least it did do that; presently on f24 it allows
activating the socket quite happily. This also caused user confusion[1]

Just remove the socket file. I've filed a new RFE to track coming up
with a solution to the autostart problem[2], we can point users at that
if there's more confusion:

[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1279348
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1326136

(cherry picked from commit 3b9100a4)

It's a fairly common error that a user tries to connect to a URI
like qemu://system or qemu://session (missing a slash). This errors
like:

$ virsh --connect qemu://session
error: failed to connect to the hypervisor
error: Unable to resolve address 'session' service '16514': No address associated with hostname

If you already know that the standard qemu URI has 3 slashes, that
error will make it obvious enough. But new user's may not get it.
There's even a RHEL support page explicitly mentioning it!:

https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Virtualization_Deployment_and_Administration_Guide/sect-Troubleshooting-Common_libvirt_errors_and_troubleshooting.html

Catch this error early in libvirt.c virConnectOpen for qemu (and vbox
which has similar rules

https://bugzilla.redhat.com/show_bug.cgi?id=1038304
(cherry picked from commit 0d157957)

It isn't implemented and does not work:

error: internal error: guest failed to start: /usr/lib/libvirt/libvirt_lxc: option '--veth' requires an argument
syntax: /usr/lib/libvirt/libvirt_lxc [OPTIONS] ...

We previously threw an explicit error, but this changed in
22cff52a , which I suspect was
untested for LXC

(cherry picked from commit 27f2b747)

While working on the tests for the secret initialization vector, I found
that the existing iSCSI tests were lacking in how they defined the IQN.
Many had IQN's of just 'iqn.1992-01.com.example' for one disk while using
'iqn.1992-01.com.example/1' for the second disk (same for hostdevs - guess
how they were copied/generated).

Typically (and documented this way), IQN's would include be of the form
'iqn.1992-01.com.example:storage/1' indicating an IQN using "storage" for
naming authority specific string and "/1" for the iSCSI LUN.

So modify the input XML's to use the more proper format - this of course
has a ripple effect on the output XML and the args.

Also note that the "%3A" is generated by the virURIFormat/xmlSaveUri
to represent the colon.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
(cherry picked from commit dd140028)

virTypedParamsValidate currently uses an index based check to find
duplicate parameters. This check does not work. Consider the following
simple example:

We have only 2 keys
A  (multiples allowed)
B  (multiples NOT allowed)

We are given the following list of parameters to check:
A
A
B

If you work through the validation loop you will see that our last iteration
through the loop has i=2 and j=1. In this case, i > j and keys[j].value.i will
indicate that multiples are not allowed. Both conditionals are satisfied so
an incorrect error will be given: "parameter '%s' occurs multiple times"

This patch replaces the index based check with code that remembers
the name of the last parameter seen and only triggers the error case if
the current parameter name equals the last one. This works because the
list is sorted and duplicate parameters will be grouped together.

In reality, we hit this bug while using selective block migration to migrate
a guest with 5 disks. 5 was apparently just the right number to push i > j
and hit this bug.

virsh migrate --live guestname --copy-storage-all
              --migrate-disks vdb,vdc,vdd,vde,vdf
              qemu+ssh://dsthost/systemSigned-off-by: NJason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: NEric Farman <farman@linux.vnet.ibm.com>
(cherry picked from commit 0e570a6a)

Commit id '4b75237f' seems to have triggered Coverity into finding
at least one memory leak in xen_xl.c for error path for cleanup where
the listenAddr would be leaked. Reviewing other callers, it seems that
qemu_parse_command.c would have the same issue, so just it too.

(cherry picked from commit 727a3c58)

To ensure the libvirt libxl driver will build with future versions
of Xen where the libxl API may change in incompatible ways,
explicitly use LIBXL_API_VERSION 0x040200. The libxl driver
does use new libxl APIs that have been added since Xen 4.2, but
currently it does not make use of any changes made to existing
APIs such as libxl_domain_create_restore or libxl_set_vcpuaffinity.
The version can be bumped if/when the libxl driver consumes the
changed APIs.

Further details can be found in the following discussion thread

https://www.redhat.com/archives/libvir-list/2016-April/msg00178.htmlSigned-off-by: NJim Fehlig <jfehlig@suse.com>
(cherry picked from commit e7440656)

In a few places in libvirt we busy-wait for events, for example qemu
creating a monitor socket.  This is problematic because:

 - We need to choose a sufficiently small polling period so that
   libvirt doesn't add unnecessary delays.

 - We need to choose a sufficiently large polling period so that
   the effect of busy-waiting doesn't affect the system.

The solution to this conflict is to use an exponential backoff.

This patch adds two functions to hide the details, and modifies a few
places where we currently busy-wait.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
(cherry picked from commit beaa447a)

Move some API specific documentation out of -docs package and into
-devel, and some end user docs out of -devel and into -docs, then
drop the -devel dep on -docs. This is more in line with the suggested
Fedora guidelines.

https://bugzilla.redhat.com/show_bug.cgi?id=1310155
(cherry picked from commit feffcc03)

Take setlocale/gettext error handling pattern from tools/virsh-*
and use it for all standalone binaries via a new shared
virGettextInitialize routine. The virsh* pattern differed slightly
from other callers. All users now consistently:

* Ignore setlocale errors. virsh has done this forever, presumably for
  good reason. This has been partially responsible for some bug reports:

  https://bugzilla.redhat.com/show_bug.cgi?id=1312688
  https://bugzilla.redhat.com/show_bug.cgi?id=1026514
  https://bugzilla.redhat.com/show_bug.cgi?id=1016158

* Report the failed function name
* Report strerror

(cherry picked from commit e7db2278)

https://bugzilla.redhat.com/show_bug.cgi?id=1147737
(cherry picked from commit 0f8be253)

We use device-mapper to enumerate all dm devices, and filter out
the list of multipath devices by checking the target_type string
name. The code however cancels all scanning if we encounter
target_type=NULL

I don't know how to reproduce that situation, but a user was hitting
it in their setup, and inspecting the lvm2/device-mapper code shows
many places where !target_type is explicitly ignored and processing
continues on to the next device. So I think we should do the same

https://bugzilla.redhat.com/show_bug.cgi?id=1069317
(cherry picked from commit 8f8c0feb)

The watchdog cli refactoring in 4666b762 dropped the temporary variable
we use to convert to action=dump to action=pause for the qemu cli, and
stored the converted value in the domain structure. Our other watchdog
handling code then treated it as though the user requested action=pause,
which broke action=dump handling.

Revive the temporary variable to fix things.

(cherry picked from commit a91177c8)

Trying to reload/SIGUSR1 virtlogd or virtlockd fails with:

error : virNetDaemonRun:747 : internal error: Not all servers restored, cannot run server

Commit 252610f7 changed the daemon state json to allow tracking
multiple servers. However it missed clearing dmn->srvObject after
the json is empty, like the previous code paths handled.  Later on in
virNewDaemonRun, dmn->srvObject is expected to be empty otherwise we
throw the above error.

https://bugzilla.redhat.com/show_bug.cgi?id=1311013
(cherry picked from commit 9b69f022)

Commit 119cd06e started setting the primary bool for the first
user-specified video even if user omitted the 'primary' attribute.

However this was done before the addition of the implicit device.
This broke startup of transient qemu domains with no <video>:
https://bugzilla.redhat.com/show_bug.cgi?id=1325757

Move this default to virDomainDefPostParseInternal,
after the addition of the implicit video device, to catch the implicit
video as well.

(cherry picked from commit 6d8b6d28)

Separate parsing of the XML from auto-generating the device.

(cherry picked from commit 6879be48)

https://bugzilla.redhat.com/show_bug.cgi?id=1303885
(cherry picked from commit cdced012)

Commit c3bd0019 forgot to cleanup after itself.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1325043Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 16b41728)

The check is supposed to stop users from trying to compile
virt-login-shell on Windows by erroring out during the
configure phase; however, there are two flaws in it:

  * the value of "x$with_win" is compared to "yes" instead
    of "xyes" (note the "x" in the first string)

  * "test" is not being used, so the script will actually
    try to run a command called "x$with_win" instead of
    performing string comparison

This patch fixes both issues.

(cherry picked from commit ccf58bd7)

FreeBSD lacks ENODATA, and viruuid.c redefines it to EIO, but it's not
actually using it. On the other hand, we have virrandom.c that's using
ENODATA. So make this re-definition common by moving it to internal.h,
so all the current and possible future users don't need to care about
that.

(cherry picked from commit edc028d1)

In the latest libxenlight code, libxl_domain_create_restore accepts a
new argument. Update libvirt's libxl driver for that. Use the macro
provided by libxenlight to detect which version should be used.

The new parameter (send_back_fd) is set to -1 because libvirt provides
no such fd.
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Message-id: 1459866012-27081-1-git-send-email-wei.liu2@citrix.com
(cherry picked from commit 216650f1)

The new perf code didn't bother to clear a pointer in 'priv' causing a
double free or other memory corruption goodness if a VM failed to start.

Clear the pointer after freeing the memory.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1324757
(cherry picked from commit 03e8d5fb)

For device hotplug, the new alias ID needs to be checked in the list
rather than using the count of devices. Unplugging a device that is not
last in the array will make further hotplug impossible due to alias
collision.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1324551
(cherry picked from commit be6e92f5)

to avoid the test failure

 7) Test driver "xen"  ... 2016-03-31 12:53:26.950+0000: 22430: debug : virDriverLoadModule:54 : Module load xen
 2016-03-31 12:53:26.950+0000: 22430: error : virDriverLoadModule:73 : failed to load module /build/libvirt-1.3.3~rc1/debian/build/src/.libs/libvirt_driver_xen.so /build/libvirt-1.3.3~rc1/debian/build/src/.libs/libvirt_driver_xen.so: undefined symbol: xlu_cfg_destroy
FAILED

(cherry picked from commit 12b239a9)

There is a LIBVIRT_ADMIN_DEFAULT_URI environment variable
which is honored by virAdmConnectOpen and documented
in the virt-admin man page.

LIBVIRT_DEFAULT_ADMIN_URI is undocumented and this is its
only occurrence.

(cherry picked from commit df896430)

(cherry picked from commit 7f35b6b6)

Postpone filling out the default connection in ctl->connname
after calling virshInit.

This allows printing help without a connection to the daemon.

(cherry picked from commit c0726e07)

fdstream.c: In function 'virFDStreamWrite':
fdstream.c:390:29: error: logical 'or' of equal expressions [-Werror=logical-op]
        if (errno == EAGAIN || errno == EWOULDBLOCK) {
                            ^~

Fedora rawhide now uses gcc 6.0 and there is a bug with -Wlogical-op
producing false warnings.

https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69602

Use GCC pragma push/pop and ignore -Wlogical-op for GCC that supports
push/pop pragma and also has this bug.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
(cherry picked from commit d713a6b1)