slot id, if specified, has to be less than the slots count.

If the added memory device would exceed the maximum memory size, reject
it.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1216046

The documentation states that for shallow block copy the image has to
have the same guest visible content as backing file of the current
image if the file is being reused. This condition can be achieved also
with a raw file (or a qcow without a backing file) so remove the
condition that would disallow it.

(This patch additionally fixes crash described in
 https://bugzilla.redhat.com/show_bug.cgi?id=1215569 )

New functions utilize previosly added prlsdkDelDisk and prlsdkGetDiskIndex
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The free callback should be qemuMonitorChardevInfoFree rather
than just 'free' when virHashCreate'ing the chardevInfo hash.

==29959== 24 bytes in 2 blocks are definitely lost in loss record 19 of 53
==29959==    at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==29959==    by 0xB95C679: strdup (in /lib64/libc-2.20.so)
==29959==    by 0x63C6546: virStrdup (virstring.c:709)
==29959==    by 0x4805ED: qemuMonitorJSONExtractChardevInfo (qemu_monitor_json.c:3429)
==29959==    by 0x4807A5: qemuMonitorJSONGetChardevInfo (qemu_monitor_json.c:3479)
==29959==    by 0x434AEC: testQemuMonitorJSONqemuMonitorJSONGetChardevInfo (qemumonitorjsontest.c:1824)
==29959==    by 0x436F2F: virtTestRun (testutils.c:211)
==29959==    by 0x436932: mymain (qemumonitorjsontest.c:2404)
==29959==    by 0x4382EA: virtTestMain (testutils.c:863)
==29959==    by 0x436B27: main (qemumonitorjsontest.c:2423)
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: NZhou Yimin <zhouyimin@huawei.com>

It would be used in qemumonitorjsontest, thus we make it non-static.
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: NZhou Yimin <zhouyimin@huawei.com>

Trying to use qemu:///session to create a storage pool pointing at
/tmp will usually fail with something like:

$ virsh pool-start tmp
error: Failed to start pool tmp
error: cannot open volume '/tmp/systemd-private-c38cf0418d7a4734a66a8175996c384f-colord.service-kEyiTA': Permission denied

If any volume in an FS pool can't be opened by the daemon, the refresh
fails, and the pool can't be used.

This causes pain for virt-install/virt-manager though. Imaging a user
downloads a disk image to /tmp. virt-manager wants to import /tmp as
a storage pool, so we can detect what disk format it is, and set the
XML correctly. However this case will likely fail as explained above.

Change the logic here to skip volumes that fail to open. This could
conceivably cause user complaints along the lines of 'why doesn't
libvirt show $ROOT-OWNED-VOLUME-FOO', but figuring that currently
the pool won't even startup, I don't think there are any current
users that care about that case.

https://bugzilla.redhat.com/show_bug.cgi?id=1103308

If you end up with a state file for a pool that no longer starts up
or refreshes correctly, the state file is never removed and adds
noise to the logs everytime libvirtd is started.

If the initial state syncing fails, delete the statefile.

Will simplify a future patch

After pool startup we call refreshPool(). If that fails, we leave
a stale pool state file hanging around.

Hit this trying to create a pool with qemu:///session containing
root owned files.

Replace with just VIR_FREE.

If we received zero iothreads from the monitor, but were perhaps
expecting to receive something, then the code was skipping the check
to ensure what's in the monitor matches our expectations.  So invert
the checks to check that what we get back matches expectations and
then check there are zero iothreads returned.

Rather than have a separate routine to parse the alias of an iothread
returned from qemu in order to get the iothread_id value, parse the alias
when returning and just return the iothread_id in qemuMonitorIOThreadInfoPtr

This set of patches removes the function, changes the "char *name" to
"unsigned int" and handles all the fallout.

Resolve some Coverity errors with IOThread changes
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Build with clang fails with:

  CC       conf/libvirt_conf_la-domain_conf.lo
  conf/domain_conf.c:13377:9: error: variable 'cpumask' is used
  uninitialized whenever 'if' condition is true
  [-Werror,-Wsometimes-uninitialized]
      if (!(tmp = virXMLPropString(node, "cpuset"))) {
                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

and many other similar errors regarding the 'cpuset' variable.

Fix by explicitly initializing it with NULL.

If someone has updated a network to change its bridge name, but the
network is still active (so that bridge name hasn't taken effect yet),
we still want to disallow another network from taking that new name.

Since some people use the same naming convention as libvirt for bridge
devices they create outside the context of libvirt, it is much nicer
if we check for those devices when looking for a bridge device name to
auto-assign to a new network.

We already check that any auto-assigned bridge device name for a
virtual network (e.g. "virbr1") doesn't conflict with the bridge name
for any existing libvirt network (via virNetworkSetBridgeName() in
conf/network_conf.c).

We also want to check that the name doesn't conflict with any bridge
device created on the host system outside the control of libvirt
(history: possibly due to the ploriferation of references to libvirt's
bridge devices in HOWTO documents all around the web, it is not
uncommon for an admin to manually create a bridge in their host's
system network config and name it "virbrX"). To add such a check to
virNetworkBridgeInUse() (which is called by virNetworkSetBridgeName())
we would have to call virNetDevExists() (from util/virnetdev.c); this
function calls ioctl(SIOCGIFFLAGS), which everyone on the mailing list
agreed should not be done from an XML parsing function in the conf
directory.

To remedy that problem, this patch removes virNetworkSetBridgeName()
from conf/network_conf.c and puts an identically functioning
networkBridgeNameValidate() in network/bridge_driver.c (because it's
reasonable for the bridge driver to call virNetDevExists(), although
we don't do that yet because I wanted this patch to have as close to 0
effect on function as possible).

There are a couple of inevitable changes though:

1) We no longer check the bridge name during
   virNetworkLoadConfig(). Close examination of the code shows that
   this wasn't necessary anyway - the only *correct* way to get XML
   into the config files is via networkDefine(), and networkDefine()
   will always call networkValidate(), which previously called
   virNetworkSetBridgeName() (and now calls
   networkBridgeNameValidate()). This means that the only way the
   bridge name can be unset during virNetworkLoadConfig() is if
   someone edited the config file on disk by hand (which we explicitly
   prohibit).

2) Just on the off chance that somebody *has* edited the file by hand,
   rather than crashing when they try to start their malformed
   network, a check for non-NULL bridge name has been added to
   networkStartNetworkVirtual().

   (For those wondering why I don't instead call
   networkValidateBridgeName() there to set a bridge name if one
   wasn't present - the problem is that during
   networkStartNetworkVirtual(), the lock for the network being
   started has already been acquired, but the lock for the network
   list itself *has not* (because we aren't adding/removing a
   network). But virNetworkBridgeInuse() iterates through *all*
   networks (including this one) and locks each network as it is
   checked for a duplicate entry; it is necessary to lock each network
   even before checking if it is the designated "skip" network because
   otherwise some other thread might acquire the list lock and delete
   the very entry we're examining. In the end, permitting a setting of
   the bridge name during network start would require that we lock the
   entire network list during any networkStartNetwork(), which
   eliminates a *lot* of parallelism that we've worked so hard to
   achieve (it can make a huge difference during libvirtd startup). So
   rather than try to adjust for someone playing against the rules, I
   choose to instead give them the error they deserve.)

3) virNetworkAllocateBridge() (now removed) would leak any "template"
   string set as the bridge name. Its replacement
   networkFindUnusedBridgeName() doesn't leak the template string - it
   is properly freed.

Commit ca329299 added a utility function virtTestCompareFiles() to
eliminate repetitive code in several test programs. It unfortunately
calls virtTestDifference() with the arguments in the wrong order -
strcontent is the "actual" output gathered by the test rig, while
filecontent is the "expected", and virtTestDifference() wants expected
(filecontent) followed by actual (strcontent), but
virtTestCompareFiles() does the opposite, which can make the output a
bit confusing when there is a failure.

Coverity notes that the switch() used to check 'connected' values has
two DEADCODE paths (_DEFAULT & _LAST).  Since 'connected' is a boolean
it can only be one or the other (CONNECTED or DISCONNECTED), so it just
seems pointless to use a switch to get "all" values.  Convert to if-else

https://bugzilla.redhat.com/show_bug.cgi?id=1161617

Add command to allow adding and removing IOThreads from the domain including
the configuration and live domain.

$ virsh iothreadadd --help
  NAME
    iothreadadd - add an IOThread to the guest domain

  SYNOPSIS
    iothreadadd <domain> <id> [--config] [--live] [--current]

  DESCRIPTION
    Add an IOThread to the guest domain.

  OPTIONS
    [--domain] <string>  domain name, id or uuid
    [--id] <number>  iothread for the new IOThread
    --config         affect next boot
    --live           affect running domain
    --current        affect current domain

$ virsh iothreaddel --help
  NAME
    iothreaddel - delete an IOThread from the guest domain

  SYNOPSIS
    iothreaddel <domain> <id> [--config] [--live] [--current]

  DESCRIPTION
    Delete an IOThread from the guest domain.

  OPTIONS
    [--domain] <string>  domain name, id or uuid
    [--id] <number>  iothread_id for the IOThread to delete
    --config         affect next boot
    --live           affect running domain
    --current        affect current domain

Assuming a running $dom with multiple IOThreads assigned and that
that the $dom has disks assigned to IOThread 1 and IOThread 2:

$ virsh iothreadinfo $dom
 IOThread ID     CPU Affinity
 ---------------------------------------------------
  1               2
  2               3
  3               0-1

$ virsh iothreadadd $dom 1
error: invalid argument: an IOThread is already using iothread_id '1' in iothreadpids

$ virsh iothreadadd $dom 1 --config
error: invalid argument: an IOThread is already using iothread_id '1' in persistent iothreadids

$ virsh iothreadadd $dom 4
$ virsh iothreadinfo $dom
 IOThread ID     CPU Affinity
 ---------------------------------------------------
  1               2
  2               3
  3               0-1
  4               0-3

$ virsh iothreadinfo $dom --config
 IOThread ID     CPU Affinity
 ---------------------------------------------------
  1               2
  2               3
  3               0-1

$ virsh iothreadadd $dom 4 --config
$ virsh iothreadinfo $dom --config
 IOThread ID     CPU Affinity
  ---------------------------------------------------
    1               2
    2               3
    3               0-1
    4               0-3

Assuming the same original configuration

$ virsh iothreaddel $dom 1
error: invalid argument: cannot remove IOThread 1 since it is being used by disk 'vde'

$ virsh iothreaddel $dom 3

$ virsh iothreadinfo $dom
 IOThread ID     CPU Affinity
 ---------------------------------------------------
  1               2
  2               3

$ virsh iothreadinfo $dom --config
 IOThread ID     CPU Affinity
 ---------------------------------------------------
  1               2
  2               3
  3               0-1

Add qemuDomainAddIOThread and qemuDomainDelIOThread in order to add or
remove an IOThread to/from the host either for live or config optoins

The implementation for the 'live' option will use the iothreadpids list
in order to make decision, while the 'config' option will use the
iothreadids list.  Additionally, for deletion each may have to adjust
the iothreadpin list.

IOThreads are implemented by qmp objects, the code makes use of the existing
qemuMonitorAddObject or qemuMonitorDelObject APIs.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

We're about to allow IOThreads to be deleted, but an iothreadid may be
included in some domain thread sched, so add a new API to allow removing
an iothread from some entry.

Then during the writing of the threadsched data and an additional check
to determine whether the bitmap is all clear before writing it out.

Add remote support for the add/delete IOThread API's

Add libvirt API's to manage adding and deleting IOThreads to/from the
domain

With iothreadid's allowing any 'id' value for an iothread_id, the
iothreadsched code needs a slight adjustment to allow for "any"
unsigned int value in order to create the bitmap of ids that will
have scheduler adjustments. Adjusted the doc description as well.

Remove the iothreadspin array from cputune and replace with a cpumask
to be stored in the iothreadids list.

Adjust the test output because our printing goes in order of the iothreadids
list now.

Since it's only ever referenced in domain_conf.c, make the function
static, but also will need to move it to somewhere before it's referenced
rather than forward referencing it.

Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.

Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.

Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id

Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.

The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).

Adding a new XML element 'iothreadids' in order to allow defining
specific IOThread ID's rather than relying on the algorithm to assign
IOThread ID's starting at 1 and incrementing to iothreads count.

This will allow future patches to be able to add new IOThreads by
a specific iothread_id and of course delete any exisiting IOThread.

Each iothreadids element will have 'n' <iothread> children elements
which will have attribute "id".  The "id" will allow for definition
of any "valid" (eg > 0) iothread_id value.

On input, if any <iothreadids> <iothread>'s are provided, they will
be marked so that we only print out what we read in.

On input, if no <iothreadids> are provided, the PostParse code will
self generate a list of ID's starting at 1 and going to the number
of iothreads defined for the domain (just like the current algorithm
numbering scheme).  A future patch will rework the existing algorithm
to make use of the iothreadids list.

On output, only print out the <iothreadids> if they were read in.

All the libraries use same parameters when building, why not have it in
one place at the begining of the Makefile.

This will also ensure no new mock library will have a problem with
missing e.g. MINGW_EXTRA_LDFLAGS.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In a lot places we use path like this:

  $(srcdir)/../src/....

when in fact it can be:

  $(top_srcdir)/src/
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

snapshot and configFile are not freed, free them.
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>

This fix should completely close
https://bugzilla.redhat.com/show_bug.cgi?id=1214605Signed-off-by: NPavel Fedin <p.fedin@samsung.com>

commit id '1e13eff4' didn't init found when changed from a bool to
an int in virStoragePoolFCRefreshThread and Coverity...

The lookup is just for check whether a domain we are about to add does
not already exists. Well, the virDomainObjListAdd() function does that
for us already so there's no need to duplicate the check.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit dcbb243b used the return value of
the function as int even though it returns bool.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>