Create a bitmap of iothreads that have scheduler info set so that the
transformation algorithm does not have to iterate the empty bitmap many
times. By reusing self-expanding bitmaps the bitmap size does not need
to be pre-calculated.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1264008

This patch adds new xml element, and so we can have the option of
also having perf events enabled immediately at startup.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-6-git-send-email-qiaowei.ren@intel.com

This patch adds support for "vpindex", "runtime", "synic",
"stimer", and "vendor_id" features available in qemu 2.5+.

- When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX
to get virtual processor ID.

- Hyper-V "runtime" enlightement feature allows to use MSR
HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes
running guest code, as well as the time the hypervisor spends running
code on behalf of that guest.

- Hyper-V "synic" stands for Synthetic Interrupt Controller, which is
lapic extension controlled via MSRs.

- Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support.
Guest can setup and use fired by host events (SynIC interrupt and
appropriate timer expiration message) as guest clock events

- Hyper-V "reset" allows guest to reset VM.

- Hyper-V "vendor_id" exposes hypervisor vendor id to guest.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

1. All hyperv features are tristate ones. So make tristate generating part common.
2. Reduce nesting on spinlocks.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

1. All hyperv features are tristate ones. So make tristate parsing code common.
2. Reindent switch statement.
3. Reduce nesting in spinlocks parsing.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Most hypervisors use Hardware Assisted Paging by default and don't
require specifying the feature in domain conf. But some hypervisors
support disabling HAP on a per-domain basis. To enable HAP by default
yet provide a knob to disable it, extend the <hap> feature with a
'state=on|off' attribute, similar to <pvspinlock> and <vmport> features.

In the absence of <hap>, the hypervisor default (on) is used. <hap>
without the state attribute would be the same as <hap state='on'/> for
backwards compatibility. And of course <hap state='off'/> disables hap.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.

In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

It's just a combination of AddImplicitControllers, and AddConsoleCompat.
Every caller that wants ImplicitControllers also wants the ConsoleCompat
AFAICT, so lump them together. We also need it for future patches.

Judging by how the whitelist has skewed quite far from the original
error message, I think it's better to just drop these.

If someone wants to revive this check I suggest implementing it on
a per-HV driver basis with PostParse callbacks.

Add new function to manage adding the disk -drive options to the
command line removing that task from the mainline qemuBuildCommandLine.

Also since using const virDomainDef in new function, that means other
functions called needed to change their usage.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add new function to manage adding the controller -device options to the
command line removing that task from the mainline qemuBuildCommandLine.

Also adjust to using const virDomainDef instead of virDomainDefPtr.
This causes collateral damage in order to modify called APIs to use
the const virDomainDef instead as well.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Extend the chardev source XML so that there is a new optional
<log/> element, which is applicable to all character device
backend types. For example, to log output of a TCP backed
serial port

    <serial type='tcp'>
      <source mode='connect' host='127.0.0.1' service='9999'/>
      <protocol type='raw'/>
      <log file='/var/log/libvirt/qemu/demo-serial0.log' append='on'/>
      <target port='0'/>
    </serial>

Not all hypervisors will support use of logfiles.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Cpus are indexed starting from '0' so the check was invalid.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1316384
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1316420

Introduce VIR_DOMAIN_DEF_FEATURE_OFFLINE_VCPUPIN domain feature flag
whcih will allow to skip ignoring of the pinning information for
hypervisor drivers which will want to implement forward-pinning of
vcpus.

Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.

The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.

To avoid having to forbid new features added to domain XML in post parse
callbacks for individual hypervisor drivers the feature flag mechanism
will allow to add a central check that will be disabled for the drivers
that will add support.

As a first example flag, the 'hasWideSCSIBus' is converted to the new
bitmap.

The API documentation states that the function is returning pinning for
all vCPUs, so we can actually do so if the user passes a large enough
array.

The implementation of the inner guts of the function is similar for all
drivers, so we can add a helper and not have to reimplement it three
times.

While trying to build with -Os couple of compile errors showed
up.

conf/domain_conf.c: In function 'virDomainChrRemove':
conf/domain_conf.c:13666:24: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
     virDomainChrDefPtr ret, **arrPtr = NULL;
                        ^
Compiler fails to see that @ret is used only if set in the loop,
but whatever, there's no harm in initializing the variable.

In vboxAttachDrivesNew and _vboxAttachDrivesOld compiler thinks
that @rc may be used uninitialized. Well, not directly, but maybe
after some optimization. Yet again, no harm in initializing a
variable.

In file included from ./util/virthread.h:26:0,
                 from ./datatypes.h:28,
                 from vbox/vbox_tmpl.c:43,
                 from vbox/vbox_V3_1.c:37:
vbox/vbox_tmpl.c: In function '_vboxAttachDrivesOld':
./util/virerror.h:181:5: error: 'rc' may be used uninitialized in this function [-Werror=maybe-uninitialized]
     virReportErrorHelper(VIR_FROM_THIS, code, __FILE__,              \
     ^
In file included from vbox/vbox_V3_1.c:37:0:
vbox/vbox_tmpl.c:1041:14: note: 'rc' was declared here
     nsresult rc;
              ^
Yet again, one uninitialized variable:

qemu/qemu_driver.c: In function 'qemuDomainBlockCommit':
qemu/qemu_driver.c:17194:9: error: 'baseSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
         qemuDomainPrepareDiskChainElement(driver, vm, baseSource,
         ^

And another one:

storage/storage_backend_logical.c: In function 'virStorageBackendLogicalMatchPoolSource.isra.2':
storage/storage_backend_logical.c:618:33: error: 'thisSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
                       thisSource->devices[j].path))
                                 ^
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Prior to commit id '3d021381' virDomainObjUpdateModificationImpact was
part of virDomainLiveConfigHelperMethod and the *flags if condition
VIR_DOMAIN_AFFECT_CONFIG checked the ->persistent boolean and made the
virDomainObjGetPersistentDef call.

Since the functions were split the ->persistent check is all that remained
and thus could be combined into one if statement.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This parameter controls the maximum bandwidth to be used
within a period for whole domain.
Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

This parameter represents top level period cgroup
that limits whole domain enforcement period for a quota
Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory.  It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar.  If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We always place primary video device at first place, to make it easier
to create a qemu command or format an xml, but we should also set the
primary boolean for primary video device to 'true'.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.

Add a qemuxml2argv test for virtio-gpu + spice with virgl.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Revert commit 55e6d8cd.

This fix for https://bugzilla.redhat.com/show_bug.cgi?id=1267256
unconditionally required a machine type for all machine types
even though qemu is the only emulator using them.

Revert it to fix persistent configs for drivers with no machine type:
https://www.redhat.com/archives/libvir-list/2016-February/msg01228.html

Checking whether x > 0 before looping over [0..x] items doesn't make
sense and multi-line body must have curly brackets around it.

Best viewed with '-w'.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There's a check if a domain definition has any graphics card and
if so, we iterate over each one of them. This makes no sense,
because even if it has none we can still iterate over.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Seems like the natural fit, since we are already adding other XML bits
in the PostParse routine.

Previously AddImplicitControllers was only called at the end of XML
parsing, meaning code that builds a DomainDef by hand had to manually
call it. Now those PostParse callers get it for free.

There's some test churn here; xen xm and sexpr test suite bits weren't
calling this before, but now they are, so you'll see new IDE controllers.
I don't think this will cause problems in practice, since the code already
needs to handle these implicit controllers like in the case when a user
defines their own XML.

virDomainObjWait is designed to be called in a loop. Make sure we break
the loop in case the domain dies to avoid waiting for an event which
will never happen.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Commit f1a89a8b allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.

Check for the presence of os->type.machine even if the
VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS flag is set,
otherwise the daemon can crash on carelessly crafted input
in the config directory.

https://bugzilla.redhat.com/show_bug.cgi?id=1267256

Since no value in the virGICVersion enumeration is negative, a clever
enough compiler can report an error such as

  src/conf/domain_conf.c:15337:75: error: comparison of unsigned enum
  expression < 0 is always false [-Werror,-Wtautological-compare]
    if ((def->gic_version = virGICVersionTypeFromString(tmp)) < 0 ||
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~

virGICVersionTypeFromString() can, however, return a negative value if
the input string is not part of the enumeration, so we definitely need
that check.

Work around the problem by storing the return value in a temporary int
variable.

Instead of allowing any random positive number, restrict the possible
values to the ones that are part of the virGICVersion enumeration.

Older gcc fails to see that the variable is set iff @hasPriority
== true in which case the former is set a value. Initialize the
value while declaring it to make the compiler shut up.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Similarly to previous commit change the way how iothread scheduler info
is stored and clean up a lot of unnecessary code.

Due to bad design the vcpu sched element is orthogonal to the way how
the data belongs to the corresponding objects. Now that vcpus are a
struct that allow to store other info too, let's convert the data to the
sane structure.

The helpers for the conversion are made universal so that they can be
reused for iothreads too.

This patch also resolves https://bugzilla.redhat.com/show_bug.cgi?id=1235180
since with the correct storage approach you can't have dangling data.

virDomainDefFormatInternal is growing rather large. Extract the cputune
formatter into a separate function.

Now that the pinning info is stored elsewhere we can delete all the
obsolete code.