- 15 11月, 2009 3 次提交
-
-
由 Matthias Bolte 提交于
* docs/drivers.html.in: list the ESX driver * docs/drvesx.html.in: the new ESX driver documentation * docs/hvsupport.html.in: add the ESX driver to the matrix * docs/index.html.in, docs/sitemap.html.in: list the ESX driver * src/esx/esx_driver.c: fix and cleanup some comments
-
由 Matthias Bolte 提交于
Debian's /etc/xml/catalog doesn't contain system identifiers, so use public identifiers instead. * docs/Makefile.am: use public instead of system identifier * docs/site.xsl: use matching public identifier
-
由 Jim Fehlig 提交于
* src/xen/xen_hypervisor.c: xen-unstable changeset 19788 removed MAX_VIRT_CPUS from public headers, breaking compilation of libvirt on -unstable. Its semanitc was retained with XEN_LEGACY_MAX_VCPUS. Ensure MAX_VIRT_CPUS is defined accordingly.
-
- 13 11月, 2009 24 次提交
-
-
由 Daniel P. Berrange 提交于
If 'with_udev=check' then missing pciaccess should not be a fatal error. It should merely disable the udev driver. * configure.in: Fix pciaccess check to be non-fatal
-
由 Daniel P. Berrange 提交于
Device kit support was removed, but the configure.ac checks were left in place. A number of the XXX_REQUIRED=X.Y.Z variables were not declared in the correct location (ie top of the file) * configure.in: Remove device kit checks & move mis-placed variables to correct location
-
由 Daniel P. Berrange 提交于
The QEMU monitor open method would not take a reference on the virDomainObjPtr until it had successfully opened the monitor. The cleanup code upon failure to open though would call qemuMonitorClose() which would in turn decrement the reference count. This caused the virDoaminObjPtr to be mistakenly freed and then the whole driver crashes * src/qemu/qemu_monitor.c: Fix reference counting in qemuMonitorOpen
-
由 Daniel P. Berrange 提交于
The HAL driver returns a fatal error code in the case where HAL is not running. This causes the entire libvirtd daemon to quit which isn't desirable. Instead it should simply disable the HAL driver * src/node_device/node_device_hal.c: Quietly disable HAL if it is not running
-
由 Daniel P. Berrange 提交于
* daemon/libvirtd.c: Fix incorrect goto label causing cleanup to be missed when state driver init fails
-
由 Matthew Booth 提交于
* src/qemu/qemu_conf.c: Remove and inline qemudBuildCommandLineChrDevTargetStr
-
由 Matthew Booth 提交于
-
由 Jamie Strandboge 提交于
* src/security/security_apparmor.c: a few code cleanups following a review on the list
-
由 Jamie Strandboge 提交于
Fixes https://launchpad.net/bugs/453335 * src/security/virt-aa-helper.c: suppress confusing and misleading apparmor denied message when kvm/qemu tries to open a libvirt specified readonly file (such as a cdrom) with write permissions. libvirt uses the readonly attribute for the security driver only, and has no way of telling kvm/qemu that the device should be opened readonly
-
由 Jamie Strandboge 提交于
Fixes https://launchpad.net/bugs/460271 * src/security/virt-aa-helper.c: require absolute path for dynamic added files. This is required by AppArmor and conveniently prevents adding tcp consoles to the profile
-
由 Jamie Strandboge 提交于
* examples/apparmor/libvirt-qemu: adds pulseaudio, alsa and preliminary save/restore to the example apparmor abstraction * examples/apparmor/usr.sbin.libvirtd: allows libvirtd access to inet dgram, inet6 dgram, inet6 stream and /usr/lib/libvirt/*
-
由 Daniel P. Berrange 提交于
The 'virsh console' command did not check if the domain was already running before attempting to fetch the XML and extract the console PTY path. This caused a slightly unhelpful / misleading error message for the user. The explicit check ensures the user gets an explicit 'domain is not running' message. * tools/virsh.c: Validate that state != VIR_DOMAIN_SHUTOFF in virsh console command
-
由 Daniel P. Berrange 提交于
The wrong variable was being passed in with the LXC event callback resulting in a later deadlock or crash * src/lxc/lxc_driver.c: Pass 'vm' instead of 'driver' to event callback
-
由 Daniel P. Berrange 提交于
In the scenario where the cgroups were mounted but the particular group did not exist, and the caller had not requested auto-creation, the code would fail to return an error condition. This caused the lxc_controller to think the cgroup existed, and it then later failed when attempting to use it * src/util/cgroup.c: Raise an error if the cgroup path does not exist
-
由 Daniel P. Berrange 提交于
There is a race condition in HAL driver startup where the callback can get triggered before we have finished startup. This then causes a deadlock in the driver. * src/node_device/node_device_hal.c: RElease driver lock before registering DBus callbacks
-
由 Daniel P. Berrange 提交于
If the virDomainDefPtr object has an 'id' of -1, then forcably set the VIR_DOMAIN_XML_INACTIVE flag to ensure generated XML does not include any cruft from the previously running guest such as console PTY path, or VNC port. * src/conf/domain_conf.c: Set VIR_DOMAIN_XML_INACTIVE if def->id is -1. Replace checks for def->id == -1 with check against flags & VIR_DOMAIN_XML_INACTIVE.
-
由 Daniel P. Berrange 提交于
The capng_lock() call sets the SECURE_NO_SETUID_FIXUP and SECURE_NOROOT bits on the process. This prevents the kernel granting capabilities to processes with an effective UID of 0, or with setuid programs. This is not actually what we want in the container init process. It should be allowed to run setuid processes & keep capabilities when root. All that is required is masking a handful of dangerous capabilities from the bounding set. * src/lxc/lxc_container.c: Remove bogus capng_lock() call.
-
由 Daniel P. Berrange 提交于
The libvirtd initscript could get confused between the system and session instances of the daemon. To avoid this it is neccessary to check the pidfile explicitly. * daemon/libvirtd.init.in: Always check the pidfile of the system daemon to avoid confusion with the session daemons
-
由 Jamie Strandboge 提交于
* src/security/virt-aa-helper.c: get_definition() now calls the new caps_mockup() function which will parse the XML for os.type, os.type.arch and then sets the wordsize. These attributes are needed only to get a valid virCapsPtr for virDomainDefParseString(). The -H and -b options are now removed from virt-aa-helper (they weren't used yet anyway). * tests/virt-aa-helper-test: extend and fixes tests, chmod'ed 755
-
由 David Allan 提交于
uses libpciaccess to provide human readable names for PCI vendor and device IDs * configure.in: add a requirement for libpciaccess >= 0.10.0 * src/Makefile.am: add the associated compilation flags and link * src/node_device/node_device_udev.c: lookup the libpciaccess for vendor name and product name based on their ids
-
由 David Allan 提交于
* configure.in src/Makefile.am: remove the configuration check and build instructions * src/node_device/node_device_devkit.c: removed the module * src/node_device/node_device_driver.c src/node_device/node_device_driver.h: removed references to the old backend
-
由 David Allan 提交于
* src/conf/node_device_conf.h src/conf/node_device_conf.c: add specific support for SCSI target in node device capabilities * src/node_device/node_device_udev.c: add some extra detection code when handling udev output
-
由 David Allan 提交于
* configure.in: add new --with-udev, disabled by default, and requiring libudev > 145 * src/node_device/node_device_udev.c src/node_device/node_device_udev.h: the new node device backend * src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c to a better file name * src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple of fields in node device definitions, and an API to look them up, remove a couple of unused fields from previous patch. * src/node_device/node_device_driver.c src/node_device/node_device_driver.h: plug the new driver * po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new files and symbols * src/util/util.h src/util/util.c: add a new convenience macro virBuildPath and virBuildPathInternal() function
-
由 David Allan 提交于
* src/conf/node_device_conf.h src/conf/node_device_conf.c: add the new fields in the structure as well as parsing and serialization
-
- 12 11月, 2009 9 次提交
-
-
由 Cole Robinson 提交于
There is currently no way to determine the libvirt version of a remote libvirtd we are connected to. This is a useful piece of data to enable feature detection.
-
由 Maximilian Wilhelm 提交于
* src/xen/xen_driver.c: Add support for VIR_MIGRATE_PERSIST_DEST flag * src/xen/xend_internal.c: Add support for VIR_MIGRATE_UNDEFINE_SOURCE flag * include/libvirt/virterror.h, src/util/virterror.c: Add new errorcode VIR_ERR_MIGRATE_PERSIST_FAILED
-
由 pritesh 提交于
* src/conf/domain_conf.h src/conf/domain_conf.c: add the new entry in the enum and lists of virDomainDiskBus * src/qemu/qemu_conf.c: same for virDomainDiskQEMUBus
-
由 Ryota Ozaki 提交于
* src/lxc/lxc_driver.c: add lxcDomainInterfaceStats implementing virDomainInterfaceStats()
-
由 Daniel P. Berrange 提交于
The xenstore database sometimes has stale domain IDs which are not present in the hypervisor anymore. Filter these out to avoid causing confusion * src/xen/xs_internal.c: Filter domain IDs against HV's list * src/xen/xen_hypervisor.h, src/xen/xen_hypervisor.c: Add new xenHypervisorHasDomain() method for checking ID validity
-
由 Jonas Eriksson 提交于
The xenUnifiedNumOfDomains and xenUnifiedListDomains methods work together as a pair, so it is critical they both apply the same logic. With the current mis-matched logic it is possible to sometimes get into a state when you miss certain active guests. * src/xen/xen_driver.c: Change xenUnifiedNumOfDomains ordering to match xenUnifiedListDomains.
-
由 Daniel P. Berrange 提交于
Sometimes getaddrinfo returns IPv4 addresses before IPv6 addresses. IPv6 sockets default to attempting to bind to IPv4 addresses too. So if the IPv4 address is activated first, then binding to IPv6 will unneccessarily fail. * daemon/libvirtd.c: Bind to IPv6 and IPv4 addresses separately
-
由 Daniel P. Berrange 提交于
The numactl package is not applicable for s390[x] arches, so do not enable it as a build dep. * libvirt.spec.in: Exclude numactl on s390[x]
-
由 Ryota Ozaki 提交于
* src/qemu/qemu_monitor.c: add error check for qemuMonitorOpenXXX returned file descriptor
-
- 11 11月, 2009 4 次提交
-
-
由 Daniel P. Berrange 提交于
When running qemu:///system instance, libvirtd runs as root, but QEMU may optionally be configured to run non-root. When then saving a guest to a state file, the file is initially created as root, and thus QEMU cannot write to it. It is also missing labelling required to allow access via SELinux. * src/qemu/qemu_driver.c: Set ownership on save image before running migrate command in virDomainSave impl. Call out to security driver to set save image labelling * src/security/security_driver.h: Add driver APIs for setting and restoring saved state file labelling * src/security/security_selinux.c: Implement saved state file labelling for SELinux
-
由 Gerhard Stenzel 提交于
* src/qemu/qemu.conf: disables the mac_filter config switch by default to match existing convention, also document the option
-
由 Ryota Ozaki 提交于
* src/qemu/qemu_conf.c: don't initialize ebtables if disabled
-
由 Eduardo Otubo 提交于
* src/phyp/phyp_driver.c: a 10s timeout on socket availability was way too long, reduced to 1ms
-