- 18 2月, 2011 1 次提交
-
-
由 Laine Stump 提交于
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463 The problem was that, since a bridge always acquires the MAC address of the connected interface with the numerically lowest MAC, as guests are started and stopped, it was possible for the MAC address to change over time, and this change in the network was being detected by Windows 7 (it sees the MAC of the default route change), so on each reboot it would bring up a dialog box asking about this "new network". The solution is to create a dummy tap interface with a MAC guaranteed to be lower than any guest interface's MAC, and attach that tap to the bridge as soon as it's created. Since all guest MAC addresses start with 0xFE, we can just generate a MAC with the standard "0x52, 0x54, 0" prefix, and it's guaranteed to always win (physical interfaces are never connected to these bridges, so we don't need to worry about competing numerically with them). Note that the dummy tap is never set to IFF_UP state - that's not necessary in order for the bridge to take its MAC, and not setting it to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed in the output of the ifconfig command. I chose to not auto-generate the MAC address in the network XML parser, as there are likely to be consumers of that API that don't need or want to have a MAC address associated with the bridge. Instead, in bridge_driver.c when the network is being defined, if there is no MAC, one is generated. To account for virtual network configs that already exist when upgrading from an older version of libvirt, I've added a %post script to the specfile that searches for all network definitions in both the config directory (/etc/libvirt/qemu/networks) and the state directory (/var/lib/libvirt/network) that are missing a mac address, generates a random address, and adds it to the config (and a matching address to the state file, if there is one). docs/formatnetwork.html.in: document <mac address.../> docs/schemas/network.rng: add nac address to schema libvirt.spec.in: %post script to update existing networks src/conf/network_conf.[ch]: parse and format <mac address.../> src/libvirt_private.syms: export a couple private symbols we need src/network/bridge_driver.c: auto-generate mac address when needed, create dummy interface if mac address is present. tests/networkxml2xmlin/isolated-network.xml tests/networkxml2xmlin/routed-network.xml tests/networkxml2xmlout/isolated-network.xml tests/networkxml2xmlout/routed-network.xml: add mac address to some tests
-
- 17 2月, 2011 2 次提交
-
-
由 Osier Yang 提交于
The name convention of device mapper disk is different, and 'parted' can't be used to delete a device mapper disk partition. e.g. Name Path ----------------------------------------- 3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 Error: Expecting a partition number. This patch introduces 'dmsetup' to fix it. Changes: - New function "virIsDevMapperDevice" in "src/utils/utils.c" - remove "is_dm_device" in "src/storage/parthelper.c", use "virIsDevMapperDevice" instead. - Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in" - Check "dmsetup" in 'configure.ac' for "with-storage-disk" - Changes on "src/Makefile.am" to link against libdevmapper - New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms" Changes from v1 to v3: - s/virIsDeviceMapperDevice/virIsDevMapperDevice/g - replace "virRun" with "virCommand" - sort the list of util functions in "libvirt_private.syms" - ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration. e.g. Name Path ----------------------------------------- 3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted Name Path -----------------------------------------
-
由 Daniel Veillard 提交于
* configure.ac docs/news.html.in libvirt.spec.in: bump version and add docs * po/*.po*: updated Gujarati, Polish and Dutch localisations and regenerated
-
- 11 2月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
The logging functions are enhanced so that immediately prior to the first log message being printed to any output channel, the libvirt package version will be printed. eg $ LIBVIRT_DEBUG=1 virsh 18:13:28.013: 17536: info : libvirt version: 0.8.7 18:13:28.013: 17536: debug : virInitialize:361 : register drivers ... The 'configure' script gains two new arguments which can be used as --with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10" --with-packager-version="1.fc14" to allow distros to append a custom string with package specific data. The RPM specfile is modified so that it appends the RPM version, the build host, the build date and the packager name. eg $ LIBVIRT_DEBUG=1 virsh 18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10) 18:14:52.086: 17551: debug : virInitialize:361 : register drivers Thus when distro packagers receive bug reports they can clearly see what version was in use, even if the bug reporter mistakenly or intentionally lies about version/builds * src/util/logging.c: Output version data prior to first log message * libvirt.spec.in: Include RPM release, date, hostname & packager * configure.ac: Add --with-packager & --with-packager-version args
-
- 19 1月, 2011 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 04 1月, 2011 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.ac libvirt.spec.in docs/news.html.in: bump version and add documentation * po/*po*: regenerate po and pot files
-
- 24 12月, 2010 3 次提交
-
-
由 Wen Congyang 提交于
When I build libvirt without libvirtd, I receive some errors: cp: cannot stat `/home/wency/rpmbuild/BUILDROOT/libvirt-0.8.6-1.el6.x86_64/etc/libvirt/qemu/networks/default.xml': No such file or directory My build step: # ./autogen.sh --without-libvirtd # make dist # rpmbuild --nodeps --define "_sourcedir `pwd`" --define "_without_libvirtd 1" -ba libvirt.spec The reason is we disable network when we do not build libvirt daemon in configure.ac. After fixing this bug, I build libvirt without libvirtd, I receive other errors: RPM build errors: Installed (but unpackaged) file(s) found: /usr/share/doc/libvirt-0.8.6/html/32favicon.png /usr/share/doc/libvirt-0.8.6/html/api.html .. Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
-
由 Jiri Denemark 提交于
-
由 Daniel P. Berrange 提交于
A number of the libvirt APIs require the use of cgroups. This is not enabled by default on a RHEL6 install. After discussion with cgroups team, it was decided that upon installation of the libvirt RPM, we should automatically turn on the cgroups service. This will activate a default configuration that turns on all cgroups controllers libvirt requires for full operation.
-
- 22 12月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* libvirt.spec.in: Provide vmware conditionals.
-
- 10 12月, 2010 1 次提交
-
-
由 Dan Kenigsberg 提交于
starting a service during rpm installation is impolite. It is even worse if done during upgrade, for a service that was explicitly turned off.
-
- 01 12月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
- configure.ac libvirt.spec.in: bump version, add a missing systemtap build requirement - docs/news.html.in: add informations about the release - po/*: updated Polish and Dutch localizations, and regenerated - tests/qemuxml2argvtest.c: Fix build problem
-
- 12 11月, 2010 1 次提交
-
-
由 Cole Robinson 提交于
-
- 11 11月, 2010 1 次提交
-
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=649511 Regression of forcing 0700 permissions (which breaks guest startup because the qemu user can't see /var/lib/libvirt/*.monitor) was introduced in commit 66823690, as part of libvirt 0.8.2. * libvirt.spec.in (%files): Drop %{_localstatedir}/lib/libvirt, since libvirt depends on libvirt-client. (%files client): Guarantee 755 permissions on %(_localstatedir}/lib/libvirt, since the qemu user must be able to do pathname resolution to a subdirectory.
-
- 09 11月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
Suggested by danpb, as it's not up-to-date anymore and lacks many functions that were added to libvirtd.
-
- 29 10月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.ac libvirt.spec.in: new version * docs/news.html.in: update news page and improve format * po/*.po*: Update po again
-
- 22 10月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
-
- 20 10月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Integrate with libaudit.so for auditing of important operations. libvirtd gains a couple of config entries for auditing. By default it will enable auditing, if its enabled on the host. It can be configured to force exit if auditing is disabled on the host. It will can also send audit messages via libvirt internal logging API Places requiring audit reporting can use the VIR_AUDIT macro to report data. This is a no-op unless auditing is enabled * autobuild.sh, mingw32-libvirt.spec.in: Disable audit on mingw * configure.ac: Add check for libaudit * daemon/libvirtd.aug, daemon/libvirtd.conf, daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config options to enable auditing * include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_AUDIT source * libvirt.spec.in: Enable audit * src/util/virtaudit.h, src/util/virtaudit.c: Simple internal API for auditing messages
-
- 19 10月, 2010 1 次提交
-
-
由 Dan Kenigsberg 提交于
Vdsm needs to communicate with its guest agent via unix domain socket, which qemu creates due to the following domain xml device: <channel type='unix'> <target type='virtio' name='com.redhat.rhevm.vdsm'/> <source mode='bind' path='/var/lib/libvirt/qemu/channels/fcp-xp-1.com.redhat.rhevm.vdsm'/> </channel> The location of the socket below /var/lib/libvirt/qemu/channels makes sense, to humans and selinux policy alike. However, that socket should be accessible to vdsm, too. Due to other (storage) reasons, vdsm is to join the "qemu" group. With this patch, vdsm can look below /var/lib/libvirt/qemu and connect to the socket. The socket itself should be chmod'ed to allow qemu group read/write, but that's for another project. BZ#643407
-
- 15 10月, 2010 1 次提交
-
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=643118 * libvirt.spec.in: Provide xenapi conditionals.
-
- 10 9月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
update news, spec and french localizaton
-
- 07 9月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 25 8月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
When building libvirt RPM without macvtap, with_libnl would be undefined.
-
- 12 8月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
--dhcp-no-override description from dnsmasq man page: Disable re-use of the DHCP servername and filename fields as extra option space. If it can, dnsmasq moves the boot server and filename information (from dhcp-boot) out of their dedicated fields into DHCP options. This make extra space available in the DHCP packet for options but can, rarely, confuse old or broken clients. This flag forces "simple and safe" behaviour to avoid problems in such a case. It seems some virtual network card ROMs are this old/buggy so let's add --dhcp-no-override as a workaround for them. We don't use extra DHCP options so this should be safe. The option was added in dnsmasq-2.41, which becomes the minimum required version.
-
- 04 8月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.ac docs/news.html.in libvirt.spec.in: updates * po/*.po*: update and regenerated
-
- 17 7月, 2010 1 次提交
-
-
由 Justin Clift 提交于
This patch removes the individual author names from the libvirtd and virsh man pages, instead referring to the main AUTHORS file distributed with libvirt. This approach is needed, as we can't guarantee unicode support across all versions of pod2man used with libvirt. Additionally, this patch includes the libvirtd man page in the spec file used with "make rpm". Without this patch "make rpm" is broken.
-
- 13 7月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 05 7月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
- configure.ac docs/news.html.in libvirt.spec.in: updated - po/*/o* : updated or.po and regenerated
-
- 29 5月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
Firstly, the init script has to touch its file under /var/lock/subsys when started, otherwise the system would think it's not running and won't stop it during shutdown. Secondly, for some reason there is a policy to automatically enable init scripts when they are installed, so let the specfile do this. We also need to start the init script to ensure it will be stopped during the first shutdown after installing the package. Also $LISTFILE should be enclosed by quotes everywhere as suggested by Eric.
-
- 27 5月, 2010 2 次提交
-
-
由 Matthias Bolte 提交于
make rpm created dummy tests containing '-e #!/bin/sh' for me.
-
由 Matthias Bolte 提交于
-
- 26 5月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
This patch introduces a dependency on libnl, which subsequent patches will then use. Changes from V1 to V2: - added diffstats - following changes in tree
-
- 21 5月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
Example output during shutdown: Running guests on default URI: console, rhel6-1, rhel5-64 Running guests on lxc:/// URI: lxc-shell Running guests on xen:/// URI: error: no hypervisor driver available for xen:/// error: failed to connect to the hypervisor Running guests on vbox+tcp://orkuz/system URI: no running guests. Suspending guests on default URI... Suspending console: done Suspending rhel6-1: done Suspending rhel5-64: done Suspending guests on lxc:/// URI... Suspending lxc-shell: error: Failed to save domain 9cba8bfb-56f4-6589-2d12-8a58c886dd3b state error: this function is not supported by the hypervisor: virDomainManagedSave Note, the "Suspending $guest: " shows progress during the suspend phase if domjobinfo gives meaningful output. Example output during boot: Resuming guests on default URI... Resuming guest rhel6-1: done Resuming guest rhel5-64: done Resuming guest console: done Resuming guests on lxc:/// URI... Resuming guest lxc-shell: already active Configuration used for generating the examples above: URIS='default lxc:/// xen:/// vbox+tcp://orkuz/system' The script uses /var/lib/libvirt/libvirt-guests files to note all active guest it should try to resume on next boot. It's content looks like: default 7f8b9d93-30e1-f0b9-47a7-cb408482654b 085b4c95-5da2-e8e1-712f-6ea6a4156af2 fb4d8360-5305-df3a-2da1-07d682891b8c lxc:/// 9cba8bfb-56f4-6589-2d12-8a58c886dd3b
-
- 06 5月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
Add ebtables,iptables & iptables-ipv6 dependency to rpm. Changes from V1 to V2: -passing --without-libpcap to configure script, if libpcap is not to be used
-
- 04 5月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
This includes various things: - fix the Requires: libvirt-client to use %{name} to allow easy renaming - when building ESX support one need libcurl-devel - remove Makefile[.in] from xml/nwfilter in the docs, as this breaks parallel install ation of i686 and x86_64 packages - don't include nwfilter config files if not building with the daemon all relatively trivial which is why I packed them together * libvirt.spec.in: fix various small bugs
-
- 01 5月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.ac docs/news.html.in libvirt.spec.in: updates for release * po/*.po*: updated localizations and regenerated
-
- 28 4月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
use /var/lib/libvirt/dnsmasq since /var/lib/libvirt/network is unreadable by the dnsmasq binary * src/network/bridge_driver.c: update DNSMASQ_STATE_DIR * src/Makefile.am: create it on make install * libvirt.spec.in: take the new directory into account
-
- 16 4月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To ensure that patches in the RPM don't break any functionality it is neccessary to run the test suites during build. It currently has 3 tests disabled - daemon-conf: this is totally broken, since it relies on being able to resolve the 'libvirt' group & being able to resolve hostnames at daemon startup. This isn't possible in a mock build root - seclabeltest: fails to initialize selinux in the mock build root. Possibly fixable - nodeinfotest: broken on s390 + ppc - this is a real bug * libvirt.spec.in: Add a %check section, with 3 tests temporarily disabled
-
- 13 4月, 2010 2 次提交
-
-
由 Daniel Berteaud 提交于
* libvirt.spec.in: fix a cut and paste error
-
由 Daniel Veillard 提交于
* configure.ac docs/news.html.in libvirt.spec.in src/libvirt_public.syms: updates for release of 0.8.0 * po/*.po po/libvirt.pot: updated a lar set of localizations, and merge the messages
-