We fake stats values based on the current time, similar to how it's done
for cpu time.

We need interface names to implement InterfaceStats.

Do the check in libvirt.c, to save drivers from the burden. This changes
behavior slightly in the qemu driver: we no longer explictly error if
passed an empty string. An error will still be thrown when the device
lookup fails.

The generator couldn't tell that the stats return values were pointers.
Stick a white list in the function which tries to make this distinction.

* autobuild.sh: Disable esx/phyp build on mingw32
* configure.in: Fix handling of --without-phyp so it actually works
* libvirt.spec.in: Add missing interface.rng
* mingw32-libvirt.spec.in: Disable phyp/esx drivers
* src/phyp/phyp_driver.c: Fix missing i18n of error messages

* src/vbox/vbox_driver.c: remove some old 2.5 switches and plug the
  3.0 driver
* src/vbox/vbox_V3_0.c src/vbox/vbox_CAPI_v3_0.h: the driver for
  VirtualBox 3.0
* src/vbox/vbox_tmpl.c: handle the new driver and add event support
* src/Makefile.am: plug in the new module

* src/cgroup.c: Fix cast to uint64 from unsigned long long

Features supported:
- Connects to HMC/VIOS or IVM systems.
- Life cycle commands (resume and shutdown).
- dumpxml
- 'list' and 'list --all'

What is being implemented:
- better and centralized control for UUID
- definexml
- CPU management commands

* src/domain_conf.c src/domain_conf.h: first version of the driver
* configure.in src/Makefile.am include/libvirt/virterror.h
  src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
  in the general framework

* docs/downloads.html.in: but will remain for sake of old links.

* src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client
  to talk to the VI services on ESX nodes.
* configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h
  src/libvirt.c src/virterror.c: glue in the new driver

 * qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug,
   src/qemu.conf: Add 'cgroups_controllers' and 'cgroups_device_acl'
   parameters
 * src/qemu_conf.h, src/qemu_conf.c: Load & parse configuration params
   for cgroups
 * src/qemu_driver.c: Only use cgroups controllers that are activated,
   and use configured device whitelist instead of default, if set.

* src/qemu_driver.c: Set a restrictive block device whitelist for
  all QEMU guests. Update whitelist when hotplugging disks.
* src/cgroup.h, src/cgroup.c: Add some more convenience methods
  for dealing with block device whitelists.

* src/qemu_driver.c:  Add driver methods qemuGetSchedulerType,
  qemuGetSchedulerParameters, qemuSetSchedulerParameters
* src/lxc_driver.c: Fix to use unsigned long long consistently
  for schedular parameters
* src/cgroup.h, src/cgroup.c: Fix cpu_shares to take unsigned
  long long
* src/util.c, src/util.h, src/libvirt_private.syms: Add a
  virStrToDouble helper
* src/virsh.c: Fix handling of --set arg to schedinfo command
  to honour the designated data type of each schedular tunable
  as declared by the driver

* src/qemu_driver.c: Place guest in cgroup upon startup. Remove
  cgroup upon shutdown

Allow the driver level cgroup to be managed explicitly by the
hypervisor drivers, in order to detect whether to enable or
disable cgroup support for domains. Provides better error
reporting of failures. Also allow for creation of cgroups for
unprivileged drivers if controller is accessible by the user.

* src/cgroup.c, src/cgroup.h: Add an API to obtain a driver cgroup
* src/lxc_conf.h, src/lxc_controller.c, src/lxc_driver.c:
  Obtain a driver cgroup at startup and use that instead of
  re-creating everytime.
* src/util.c, src/util.h, src/libvirt_private.syms: Add a
  virGetUserName() helper

* src/cgroup.c: Detect the mount location of every controller at
  time a virCgroupPtr is created. Detect current process' placement
  within group to avoid assuming it is in the root. Pass controller
  ID into SetValueStr/GetValueStr to enable much duplicated code to
  be eliminated

* src/datatypes.c src/domain_conf.c src/interface_conf.c
  src/lxc_driver.c src/qemu_driver.c src/storage_backend.c src/virsh.c:
  add bare %s format string to printf-derivatives called with no format
  string

* src/security_selinux.c: Skip relabelling of shared/readonly
  disks upon shutdown, since this breaks other VMs still active
  using those disks

* src/lxc_driver.c: Implement support for domain autostart

* src/lxc_conf.h: Add queue for dispatch of domain events
* src/lxc_driver.c: Trigger domain events upon important lifecycle transitions

GCC >= 4.4 assumes the 'printf' attribute refers to the native
runtime libraries format specifiers. Thanks to gnulib, libvirt
has GNU format specifiers everywhere.  This means we need to
use 'gnu_printf' with GCC >= 4.4 to get correct compiler
checking of printf format specifiers.

* HACKING: Document new rules for ATTRIBUTE_FMT_PRINTF
* autobuild.sh, mingw32-libvirt.spec.in: Disable OpenNebula
  driver on mingw32 builds
* qemud/dispatch.h, qemud/qemu.h, src/buf.h src/internal.h,
  src/logging.h, src/security.h, src/sexpr.h, src/util.h,
  src/virterror_internal.h, src/xend_internal.c: Change
  over to ATTRIBUTE_FMT_PRINTF.
* src/virsh.c: Disable 'cd' and 'pwd' commands on Win32
  since they don't compile
* src/threads-win32.c: Add missing return value check

If the qemu binary supports "-no-kvm" and/or "-no-kqemu", they should
always be added for plain "qemu" domains.  Previously, we omitted them
whenever the host and guest architectures implied that they would be
disabled automatically, but that logic was flawed in some cases
(such as i686 and x86_64).
* src/qemu_conf.c: fix the conditions for adding "-no-kvm" and/or "-no-kqemu"

* src/datatypes.c: more cleanup, where lock must be released before
  calling error handling which tries to get it.

* qemud/remote.c src/interface_conf.[ch] src/veth.[ch]: more renaming
  from interface to iface

* include/libvirt/libvirt.h include/libvirt/libvirt.h.in: adds the new
  flag VIR_MEMORY_PHYSICAL for virDomainMemoryPeek
* src/libvirt.c: update the front-end checking
* src/qemu_driver.c: extend the QEmu driver

* docs/schemas/Makefile.am (schema_DATA): Add interface.rng.

* tests/Makefile.am (EXTRA_DIST): Add interfaceschemadata.

* src/datatypes.c: fix a lock problem on error handling, as the
  error report takes the lock, it must be released before, fixes
  the problem but just for Interface objects

* src/datatypes.c: handle the nasty case where an interface
  mac address change, while it's already in use

* virsh.c: fix a number of leaks of virDomain, virStoragePool,
  virNodeDevice, etc.

qemu network devices are hot-unplugged in two stages - first the PCI NIC
is removed using 'pci_del <pci_addr>' and then the backend is removed
using 'host_net_remove <vlan> <name>'.

In order to perform these operations we need to have retained the
PCI address, backend name and vlan number.

* src/qemu_driver.c: add qemudDomainDetachNetDevice()

When we pci_add a NIC, we need to retain the PCI address assigned by
qemu for using during detach.

* src/qemu_driver.c: use qemudParsePciAddReply() to pull the PCI
  address from the pci_add reply

* src/domain_conf.c: handle storing and parsing the PCI address in the
  domain state XML file