- 15 4月, 2016 7 次提交
-
-
由 Laine Stump 提交于
This is a standard PCI root bus (not a bridge) that can be added to a 440fx-based domain. Although it uses a PCI slot, this is *not* how it is connected into the PCI bus hierarchy, but is only used for control. Each pci-expander-bus provides 32 slots (0-31) that can accept hotplug of standard PCI devices. The usefulness of pci-expander-bus relative to a pci-bridge is that the NUMA node of the bus can be specified with the <node> subelement of <target>. This gives guest-side visibility to the NUMA node of attached devices (presuming that management apps only assign a device to a bus that has a NUMA node number matching the node number of the device on the host). Each pci-expander-bus also has a "busNr" attribute. The expander-bus itself will take the busNr specified, and all buses that are connected to this bus (including the pci-bridge that is automatically added to any expander bus of model "pxb" (see the next commit)) will use busNr+1, busNr+2, etc, and the pci-root (or the expander-bus with next lower busNr) will use bus numbers lower than busNr.
-
由 Laine Stump 提交于
This is especially useful for "bus", since the bus of a device's pci address is matched to the "index" of a controller to determine which bus it will be connected to, and "index" is always specified in decimal - being able to specify both in decimal at least makes it easier to assure a device is being assigned to the correct bus when it is added. For the other attributes, it is just a convenience. (MB: the parser already allows for any of these attributes to be given in decimal, and there are even examples floating around on the internet that give them in decimal rather than hex (written in the days before virsh did schema validation on all XML). This only updates the schema to match the parser.)
-
由 Laine Stump 提交于
This is a number between 0 and 65535 (or 0x0000 - 0xffff if specified in hexadecimal).
-
由 Laine Stump 提交于
nwfilter.rng defines uint16range and uint32range, but in a different manner (it also allows a variable name as the value, rather than just a decimal or hex number). I wanted to add uint16range to basictypes.rng, but my desired definition was parallel to those for uint8range and uint24range which are defined in basictypes.rng - they *don't* allow a variable name for the value. The simplest path to make everyone happy is to make the "plain" versions in basictypes.rng have simpler names - "uint8", "uint16", and "uint24". This patch renames uint8range and uint24range to uint8 and uint24, while the next patch will add uint16.
-
由 Laine Stump 提交于
The pcie-switch-downstream-port and pcie-root-port controllers have only a single slot, numbered 0, and the greate majority of all guest PCI devices are plugged into function 0 of whatever slot they're using. The parser makes these optional, setting them to 0 when not specified, and it's logical for the schema to also make them optional.
-
由 Cole Robinson 提交于
clarify what version initial support was added, and when libvirt started supporting it for the qemu driver https://bugzilla.redhat.com/show_bug.cgi?id=657931
-
由 Cole Robinson 提交于
Added with commit 3b431929 in v1.2.2 but never documented https://bugzilla.redhat.com/show_bug.cgi?id=1313613
-
- 08 4月, 2016 3 次提交
-
-
由 Pavel Hrdina 提交于
This cleanups the documentation, reformat some of the paragraphs to use <p> instead of </br> and rewrites the listen part to be more extendable. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Andrea Bolognani 提交于
The 'body' CSS class is not used anywhere in the HTML files, so we can get rid of the definition as well.
-
由 Vasiliy Tolstov 提交于
Signed-off-by: NVasiliy Tolstov <v.tolstov@selfip.ru>
-
- 06 4月, 2016 1 次提交
-
-
由 Daniel Veillard 提交于
- docs/news.html.in libvirt.spec.in: update for release - po/*.po*: regenerated
-
- 05 4月, 2016 1 次提交
-
-
由 Boris Fiuczynski 提交于
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
- 01 4月, 2016 2 次提交
-
-
由 Andrea Bolognani 提交于
According to MDN[1], 'margin-left' and similar CSS properties, including 'margin-right', cannot be applied to the '::first-line' pseudo-element, so this rule will never have any effect and can be safely removed. [1] https://developer.mozilla.org/en/docs/Web/CSS/::first-line
-
由 Andrea Bolognani 提交于
Commit e14c5069 dropped the only user of the 'sponsor' CSS id, so we can drop it from the stylesheet as well.
-
- 31 3月, 2016 7 次提交
-
-
由 Andrea Bolognani 提交于
Headers are bold already, so the font doesn't need to be that big to draw attention.
-
由 Andrea Bolognani 提交于
All headers except for <h1> were already bold: make it bold as well to increase visual consistency.
-
由 Andrea Bolognani 提交于
The menu should not take the focus away from the actual contents.
-
由 Andrea Bolognani 提交于
The menu should not take the focus away from the actual contents.
-
由 Andrea Bolognani 提交于
There's only one instance of that happening, and it looks kinda off. Get rid of it, along with the corresponding CSS rules.
-
由 Andrea Bolognani 提交于
-
由 Andrea Bolognani 提交于
Ensure all CSS rules are separated with a single blank line.
-
- 30 3月, 2016 1 次提交
-
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 29 3月, 2016 5 次提交
-
-
由 Qiaowei Ren 提交于
This patch adds new xml element, and so we can have the option of also having perf events enabled immediately at startup. Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com> Message-id: 1459171833-26416-6-git-send-email-qiaowei.ren@intel.com
-
由 Michal Privoznik 提交于
While we have a wiki page describing the feature [1] since the feature is distributed in our .tar.gz we ought to document it. So I went ahead, copied the wiki page and reformatted so it fits our docs coding style. 1: http://wiki.libvirt.org/page/NSS_moduleSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Cole Robinson 提交于
- remove top padding for h1. this means page titles sit flush with the top of the side bar (like 'The virtualization API' on the front page) - up the top padding for the remaining sections. makes it visually easier to tell adjacent header sections apart, especially in dense wiki pages - use two different spacing levels for h2-h4 and h5-h6, gives pages some more visual flexibility - use a slightly lower bottom padding... this makes top padding stick out more which makes it visually easier to differentiate between adjacent header sections
-
由 John Ferlan 提交于
In order to follow recent comments which indicate support for specific feature bits are supported by a specific QEMU version add the version from whence the relaxed, vapic, and spinlocks support was added.
-
由 Maxim Nestratov 提交于
This patch adds support for "vpindex", "runtime", "synic", "stimer", and "vendor_id" features available in qemu 2.5+. - When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX to get virtual processor ID. - Hyper-V "runtime" enlightement feature allows to use MSR HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes running guest code, as well as the time the hypervisor spends running code on behalf of that guest. - Hyper-V "synic" stands for Synthetic Interrupt Controller, which is lapic extension controlled via MSRs. - Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support. Guest can setup and use fired by host events (SynIC interrupt and appropriate timer expiration message) as guest clock events - Hyper-V "reset" allows guest to reset VM. - Hyper-V "vendor_id" exposes hypervisor vendor id to guest. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com> Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 22 3月, 2016 1 次提交
-
-
由 Bjoern Walk 提交于
When reading in an XML definition for a SCSI target device, the name property of struct scsi_target refers to the @target element. Let's fix this obvious typo and also extend the XML schema to provide validation. Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
-
- 21 3月, 2016 1 次提交
-
-
由 Jim Fehlig 提交于
Most hypervisors use Hardware Assisted Paging by default and don't require specifying the feature in domain conf. But some hypervisors support disabling HAP on a per-domain basis. To enable HAP by default yet provide a knob to disable it, extend the <hap> feature with a 'state=on|off' attribute, similar to <pvspinlock> and <vmport> features. In the absence of <hap>, the hypervisor default (on) is used. <hap> without the state attribute would be the same as <hap state='on'/> for backwards compatibility. And of course <hap state='off'/> disables hap. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 19 3月, 2016 1 次提交
-
-
由 Martin Kletzander 提交于
If we expose this information, which is one byte in every PCI config file, we let all mgmt apps know whether the device itself is an endpoint or not so it's easier for them to decide whether such device can be passed through into a VM (endpoint) or not (*-bridge). Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 17 3月, 2016 1 次提交
-
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 14 3月, 2016 1 次提交
-
-
由 Jim Fehlig 提交于
The docs claims the cache attribute of the disk <driver> element supports 'default' as one of its permissible values, but such configuration fails virt-xml-validate. Add 'default' as one of the cache attribute choices in domaincommon.rng.
-
- 11 3月, 2016 4 次提交
-
-
由 Cole Robinson 提交于
- Add line-height:150% spacing for all text. This makes text lines far less cramped, and seems closer visually to what wikipedia uses. - Remove bottom and top margin from lists: entries seemed needlessly spread out. - Reduce sublist indentation a bit - Add a bottom border after headings: IMO this greatly helps in break up the vertical flow of a big page of text. Doesn't look great on the front page, but helps a lot on dense pages like formatdomain
-
由 Cole Robinson 提交于
- change font-family to just 'sans-serif' rather than hardcode a few font families. this means we abide the user's browser font setting, and makes us consistent with other sites like en.wikipedia.org - raise font-size to 90%. this is what en.wikipedia.org uses. With these two tweaks, libvirt.org text renders the same as en.wikipedia.org with fedora firefox out of the box config. Previously the font on libvirt.org was very small and difficult to read.
-
由 Cole Robinson 提交于
- Drop some redundant bits - Use consistent spacing - Group similar blocks near each other There should be no functional change
-
由 Cole Robinson 提交于
This is long since obsolete, just scrap it all
-
- 10 3月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
Extend the chardev source XML so that there is a new optional <log/> element, which is applicable to all character device backend types. For example, to log output of a TCP backed serial port <serial type='tcp'> <source mode='connect' host='127.0.0.1' service='9999'/> <protocol type='raw'/> <log file='/var/log/libvirt/qemu/demo-serial0.log' append='on'/> <target port='0'/> </serial> Not all hypervisors will support use of logfiles. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 01 3月, 2016 3 次提交
-
-
由 Jiri Denemark 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1313314Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Alexander Burluka 提交于
This parameter controls the maximum bandwidth to be used within a period for whole domain. Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>
-
由 Alexander Burluka 提交于
This parameter represents top level period cgroup that limits whole domain enforcement period for a quota Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>
-