When building with --without-libvirtd and udev support is detected we
will fail to build with the following error:
    node_device/node_device_udev.c:1608:37: error: unknown type name
        'virStateInhibitCallback'

Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The src/lxc/lxc_*_dispatch.h files only had deps on the
RPC generator script & the XDR definition file. So when
the Makefile.am args passed to the generator were change,
the disaptch code was not re-generated. This caused a
build failure

  CC       libvirt_lxc-lxc_controller.o
lxc/lxc_controller.c: In function 'virLXCControllerSetupServer':
lxc/lxc_controller.c:718:47: error: 'virLXCMonitorProcs' undeclared (first use in this function)
lxc/lxc_controller.c:718:47: note: each undeclared identifier is reported only once for each function it appears in
lxc/lxc_controller.c:719:47: error: 'virLXCMonitorNProcs' undeclared (first use in this function)
make[3]: *** [libvirt_lxc-lxc_controller.o] Error 1

For added fun, the generated files were not listed in
CLEANFILES, so only a 'git clean -f' would fix the build
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The naming used in the RPC protocols for the LXC monitor and
lock daemon confused the script used to generate systemtap
helper functions. Rename the LXC monitor protocol symbols to
reduce confusion. Adapt the gensystemtap.pl script to cope
with the LXC monitor / lock daemon naming conversions.

This has no functional impact on RPC wire protocol, since
names are only used in the C layer
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A number of symbols are only present when GNUTLS is enabled.
Thus we must use a separate libvirt_gnutls.syms file for them
instead of libvirt_private.syms
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.

On FreeBSD, I got a 'make check' failure:
  GEN    check-symsorting
Symbol block at ./libvirt_atomic.syms:4: viratomic.h not found

* src/Makefile.am (SYM_FILES): New define.
(check-symsorting): Check on all symfiles, even when not used.
* src/libvirt_atomic.syms: Fix offender.

Automating a sorting check is the only way to ensure we don't
regress.  Suggested by Dan Berrange.

* src/check-symsorting.pl (check_sorting): Add a parameter,
validate that groups are in order, and that files exist.
* src/Makefile.am (check-symsorting): Adjust caller.
* src/libvirt_private.syms: Fix typo.
* src/libvirt_linux.syms: Fix file name.
* src/libvirt_vmx.syms: Likewise.
* src/libvirt_xenxs.syms: Likewise.
* src/libvirt_sasl.syms: Likewise.
* src/libvirt_libssh2.syms: Likewise.
* src/libvirt_esx.syms: Mention file name.
* src/libvirt_openvz.syms: Likewise.

More mingw build failures:

  CCLD     libvirt-lxc.la
/usr/lib64/gcc/i686-w64-mingw32/4.7.2/../../../../i686-w64-mingw32/bin/ld: cannot find libvirt_lxc.def: No such file or directory

  CC       virportallocatortest-virportallocatortest.o
../../tests/virportallocatortest.c: In function 'main':
../../tests/virportallocatortest.c:195:1: error: implicit declaration of function 'setenv' [-Werror=implicit-function-declaration]

* src/Makefile.am (GENERATED_SYM_FILES): Also generate
libvirt_lxc.def.
* bootstrap.conf (gnulib_modules): Import setenv.

virCommand gets two new APIs: virCommandSetSELinuxLabel() and
virCommandSetAppArmorProfile(), which both save a copy of a
null-terminated string in the virCommand. During virCommandRun, if the
string is non-NULL and we've been compiled with AppArmor and/or
SELinux security driver support, the appropriate security library
function is called for the child process, using the string that was
previously set. In the case of SELinux, setexeccon_raw() is called,
and for AppArmor, aa_change_profile() is called.

This functionality has been added so that users of virCommand can use
the upcoming virSecurityManagerSetChildProcessLabel() prior to running
a child process, rather than needing to setup a hook function to be
called (and in turn call virSecurityManagerSetProcessLabel()) *during*
the setup of the child process.

This makes it simpler to include the necessary system security driver
libraries for a particular system. For this patch, several existing
conditional sections from the Makfile were replaced; I'll later be
adding SECDRIVER_LIBS to libvirt_util_la_LIBADD, because vircommand.c
will be calling a function from $securitylib.

We have several cases where we need to read endian-dependent
data regardless of host endianness; rather than open-coding
these call sites, it will be nicer to funnel things through
a macro.

The virendian.h file can be expanded to add writer functions,
and/or 16-bit access patterns, if needed.  Also, if we need
to turn things into a function to avoid multiple evaluations
of buf, that can be done later.  But for now, a macro worked.

* src/util/virendian.h: New file.
* src/Makefile.am (UTIL_SOURCES): Ship it.
* tests/virendiantest.c: New test.
* tests/Makefile.am (test_programs, virendiantest_SOURCES): Run
the test.
* .gitignore: Ignore built file.

libvirt.c calls curl_global_init() if WITH_CURL is defined and thus it
should be linked with libcurl. This fixes link failure in case neither
xenapi nor esx driver is enabled (they are the only users of libcurl).

Introduce a virPortAllocator for managing TCP port allocations.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add the infrastructure for the libvirt-lxc.la library to
the remote protocol client and daemon
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Some places missed the conversion from LIBCURL_{CFLAGS,LIBS} to
CURL_{CFLAGS,LIBS}, and a part of curl check was left in
configure.ac instead of m4/virt-curl.m4 by mistake

This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.

The actual APIs are

  int virDomainLxcOpenNamespace(virDomainPtr domain,
                                int **fdlist,
                                unsigned int flags);

  int virDomainLxcEnterNamespace(virDomainPtr domain,
                                 unsigned int nfdlist,
                                 int *fdlist,
                                 unsigned int *noldfdlist,
                                 int **oldfdlist,
                                 unsigned int flags);

which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.

NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This converts the libssh2 configure check to use LIBVIRT_CHECK_PKG.
Previously it would check version 1.0 and 1.3, but this simplifies
things to just require version 1.3

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

I ran 'make dist' in the directory left over from ./autobuild.sh
(which was configured for a mingw cross build); the resulting
tarball had more files than 'make dist' on a normal Linux build.
I traced it to the fact that we were distributing a generated
file, but only when configure said the end user had to generate
the file in the first place.  In the process, I noticed that
we had some difference in symbol file names; I added a comment
explaining why the difference exists (after first trying to
normalize the names and hitting VPATH build failures).

* configure.ac (LIBVIRT_QEMU_SYMBOL_FILE): Add some comments.
* src/Makefile.am (EXTRA_DIST): No need to ship a generated file;
particularly since which file is built depends on configure results.

Add checks for existence of GNUTLS and automatically disable
it if not found.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To avoid confusion between the LXC driver <-> controller
monitor RPC protocol and the libvirt-lxc.so <-> libvirtd public
RPC protocol, rename the former to lxc_monitor_protocol.x
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

See also commit 66ff2ddc, where we avoided installing these files
as executables.

* daemon/Makefile.am (libvirtd.service): Drop chmod.
* tools/Makefile.am (libvirt-guests.service): Likewise.
* src/Makefile.am (virtlockd.service, virtlockd.socket):
Likewise.

virtlockd.service could be installed to a configurable root,
but virtlockd.socket was hardcoded to installation into a
distro.

* src/Makefile.am (virtlockd.service, virtlockd.socket): Drop
unused substitutions.
* src/locking/virtlockd.socket.in (ListenStream): Don't hard-code
/var.

We had several different styles of .in conversion in our Makefiles:
ALLCAPS, @ALLCAPS@, @lower@, ::lower::
Canonicalize on one form, to make it easier to copy and paste
between .in files.

Also, we were using some non-portable sed constructs: \@ is an
undefined escape sequence (it happens to be @ itself in GNU sed,
but POSIX allows it to mean something else), as well as risky
behavior (failure to consistently quote things means a space
in $(sysconfdir) could throw things off; also, Autoconf recommends
using | rather than , or ! in the s||| operator, because | has to
be quoted in shell and is therefore less likely to appear in file
names than , or !).

Fix all of these uses to follow the same syntax.

* daemon/libvirtd.8.in: Switch to @var@.
* tools/virt-xml-validate.in: Likewise.
* tools/virt-pki-validate.in: Likewise.
* src/locking/virtlockd.init.in: Likewise.
* daemon/Makefile.am: Prefer | over ! in sed.
(libvirtd.8): Prefer consistent substitution.
(libvirtd.init, libvirtd.service): Avoid non-portable sed.
* tools/Makefile.am (libvirt-guests.sh, libvirt-guests.init)
(libvirt-guests.service): Likewise.
(virt-xml-validate, virt-pki-validate, virt-sanlock-cleanup):
Prefer consistent capitalization.
* src/Makefile.am (virtlockd.init, virtlockd.service)
(virtlockd.socket): Prefer consistent substitution.

The functionality provided in virchrdev.c (previously virconsole.c) is
applicable to other types of character devices besides consoles, such
as channels.  This patch is just code motion, renaming things such as
"console" or "pty", instead using more general terms such as
"character device" or "device path".

This is just code motion, in preparation to rename identifiers to be
less console-specific.

since they're not scripts but systemd service files.