- 22 7月, 2011 7 次提交
-
-
由 Daniel P. Berrange 提交于
The bind mount setup is about to get more complicated. To avoid having to deal with several copies, pull it out into a separate lxcContainerMountFSBind method. Also pull out the iteration over container filesystems, so that it will be easier to drop in support for non-bind mount filesystems * src/lxc/lxc_container.c: Pull bind mount code out into lxcContainerMountFSBind
-
由 Adam Litke 提交于
When an operation started by virDomainBlockPull completes (either with success or with failure), raise an event to indicate the final status. This API allow users to avoid polling on virDomainGetBlockJobInfo if they would prefer to use an event mechanism. * daemon/remote.c: Dispatch events to client * include/libvirt/libvirt.h.in: Define event ID and callback signature * src/conf/domain_event.c, src/conf/domain_event.h, src/libvirt_private.syms: Extend API to handle the new event * src/qemu/qemu_driver.c: Connect to the QEMU monitor event for block_stream completion and emit a libvirt block pull event * src/remote/remote_driver.c: Receive and dispatch events to application * src/remote/remote_protocol.x: Wire protocol definition for the event * src/remote_protocol-structs: structure definitions for protocol verification * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event from QEMU monitor
-
由 Eric Blake 提交于
O_DIRECT has stringent requirements. Rather than make lots of changes at each site that wants to use O_DIRECT, it is easier to offload the work through a helper process that mirrors the I/O between a pipe and the actual direct fd, so that the other end of the pipe no longer has to worry about constraints. Plus, if the kernel ever gains better posix_fadvise support, then we only have to touch a single file to let all callers benefit from a more efficient way to avoid file system caching. * src/util/virfile.h (virFileDirectFdFlag, virFileDirectFdNew) (virFileDirectFdClose, virFileDirectFdFree): New prototypes. * src/util/virdirect.c: Implement new wrapper object. * src/libvirt_private.syms (virfile.h): Export new symbols. * cfg.mk (useless_free_options): Add to list. * po/POTFILES.in: Add new translations.
-
由 Laine Stump 提交于
The network XML is updated in the following ways: 1) The <forward> element can now contain a list of forward interfaces: <forward .... > <interface dev='eth10'/> <interface dev='eth11'/> <interface dev='eth12'/> <interface dev='eth13'/> </forward> The first of these takes the place of the dev attribute that is normally in <forward> - when defining a network you can specify either one, and on output both will be present. If you specify both on input, they must match. 2) In addition to forward modes of 'nat' and 'route', these new modes are supported: private, passthrough, vepa - when this network is referenced by a domain's interface, it will have the same effect as if the interface had been defined as type='direct', e.g.: <interface type='direct'> <source mode='${mode}' dev='${dev}> ... </interface> where ${mode} is one of the three new modes, and ${dev} is an interface selected from the list given in <forward>. bridge - if a <forward> dev (or multiple devs) is defined, and forward mode is 'bridge' this is just like the modes 'private', 'passthrough', and 'vepa' above. If there is no forward dev specified but a bridge name is given (e.g. "<bridge name='br0'/>"), then guest interfaces using this network will use libvirt's "host bridge" mode, equivalent to this: <interface type='bridge'> <source bridge='${bridge-name}'/> ... </interface> 3) A network can have multiple <portgroup> elements, which may be selected by the guest interface definition (by adding "portgroup='${name}'" in the <source> element along with the network name). Currently a portgroup can only contain a virtportprofile, but the intent is that other configuration items may be put there int the future (e.g. bandwidth config). When building a guest's interface, if the <interface> XML itself has no virtportprofile, and if the requested network has a portgroup with a name matching the name given in the <interface> (or if one of the network's portgroups is marked with the "default='yes'" attribute), the virtportprofile from that portgroup will be used by the interface. 4) A network can have a virtportprofile defined at the top level, which will be used by a guest interface when connecting in one of the 'direct' modes if the guest interface XML itself hasn't specified any virtportprofile, and if there are also no matching portgroups on the network.
-
由 Laine Stump 提交于
the domain XML <interface> element is updated in the following ways: 1) <virtualportprofile> can be specified when source type='network' (previously it was only valid for source type='direct') 2) A new attribute "portgroup" has been added to the <source> element. When source type='network' (the only time portgroup is recognized), extra configuration information will be taken from the <portgroup> element of the given name in the network definition. 3) Each virDomainNetDef now also potentially has a virDomainActualNetDef which is a private object (never exported/imported via the public API, and not defined in the RNG) that is used to maintain information about the physical device that was actually used for a NetDef of type VIR_DOMAIN_NET_TYPE_NETWORK. The virDomainActualNetDef will only be parsed/formatted if the parse/format function is called with the VIR_DOMAIN_XML_INTERNAL_ACTUAL_NET flag set (which is only needed when saving/loading a running domain's state info to the stateDir).
-
由 Laine Stump 提交于
virtPortProfiles are currently only used in the domain XML, but will soon also be used in the network XML. To prepare for that change, this patch moves the structure definition into util/network.h and the parse and format functions into util/network.c (I decided that this was a better choice than macvtap.h/c for something that needed to always be available on all platforms).
-
由 Eric Blake 提交于
In preparation for a future patch adding new virFile APIs. * src/util/files.h, src/util/files.c: Move... * src/util/virfile.h, src/util/virfile.c: ...here, and rename functions to virFile prefix. Macro names are intentionally left alone. * *.c: All '#include "files.h"' uses changed. * src/Makefile.am (UTIL_SOURCES): Reflect rename. * cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise. * src/libvirt_private.syms: Likewise. * docs/hacking.html.in: Likewise. * HACKING: Regenerate.
-
- 21 7月, 2011 3 次提交
-
-
由 Wen Congyang 提交于
This patch provides 4 APIs to get and set cpu.cfs_period_us and cpu.cfs_quota_us.
-
由 Wen Congyang 提交于
Introduce the function virCgroupForVcpu() to create sub directory for each vcpu.
-
由 Lai Jiangshan 提交于
Add virtkey lib for usage-improvment and keycode translating. Add 4 internal API for the aim const char *virKeycodeSetTypeToString(int codeset); int virKeycodeSetTypeFromString(const char *name); int virKeycodeValueFromString(virKeycodeSet codeset, const char *keyname); int virKeycodeValueTranslate(virKeycodeSet from_codeset, virKeycodeSet to_offset, int key_value); * include/libvirt/libvirt.h.in: extend virKeycodeSet enum * src/Makefile.am: add new virtkeycode module and rule to generate virkeymaps.h * src/util/virkeycode.c src/util/virkeycode.h: new module * src/util/virkeycode-mapgen.py: python generator for virkeymaps.h out of keymaps.csv * src/libvirt_private.syms: extend private symbols for new module * .gitignore: add generated virkeymaps.h
-
- 15 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
When using virCommandRunAsync and saving the pid for later, it is useful to be able to reap that pid in the same way that it would have been auto-reaped by virCommand if we had passed NULL for the pid argument in the first place. * src/util/command.c (virPidWait, virPidAbort): New functions, created from... (virCommandWait, virCommandAbort): ...bodies of these. (includes): Drop duplicate <stdlib.h>. Ensure that our pid_t assumptions hold. (virCommandRunAsync): Improve documentation. * src/util/command.h (virPidWait, virPidAbort): New prototypes. * src/libvirt_private.syms: Export them. * docs/internals/command.html.in: Document them.
-
- 14 7月, 2011 1 次提交
-
-
由 Michal Privoznik 提交于
Getting metadata on storage allocates a memory (path) which need to be freed after use otherwise it gets leaked. This means after use of virStorageFileGetMetadataFromFD or virStorageFileGetMetadata one must call virStorageFileFreeMetadata to free it. This function frees structure internals and structure itself.
-
- 13 7月, 2011 2 次提交
-
-
由 Daniel P. Berrange 提交于
When passing through filesystems from the host to a guest, the host filesystem passed must be audited * src/conf/domain_audit.{c,h}: Add virDomainAuditFS
-
由 Daniel P. Berrange 提交于
The LXC and UML drivers can both make use of auditing. Move the qemu_audit.{c,h} files to src/conf/domain_audit.{c,h} * src/conf/domain_audit.c: Rename from src/qemu/qemu_audit.c * src/conf/domain_audit.h: Rename from src/qemu/qemu_audit.h * src/Makefile.am: Remove qemu_audit.{c,h}, add domain_audit.{c,h} * src/qemu/qemu_audit.h, src/qemu/qemu_cgroup.c, src/qemu/qemu_command.c, src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c, src/qemu/qemu_process.c: Update for changed audit API names
-
- 12 7月, 2011 2 次提交
-
-
由 Daniel P. Berrange 提交于
Avoid re-formatting the pidfile path everytime we need it. Create it once when starting the guest, and preserve it until the guest is shutdown. * src/libvirt_private.syms, src/util/util.c, src/util/util.h: Add virFileReadPidPath * src/qemu/qemu_domain.h: Add pidfile field * src/qemu/qemu_process.c: Store pidfile path in qemuDomainObjPrivate
-
由 Eric Blake 提交于
* src/util/virtaudit.[ch]: Rename... * src/util/viraudit.[ch]: ...to match virAudit* API. * src/Makefile.am (UTIL_SOURCES): Reflect rename. * daemon/libvirtd.c: Likewise. * po/POTFILES.in: Likewise. * src/libvirt_private.syms: Likewise. * src/qemu/qemu_audit.c: Likewise.
-
- 08 7月, 2011 1 次提交
-
-
由 Michal Privoznik 提交于
This option accepts 3 values: -keep, to keep current client connected (Spice+VNC) -disconnect, to disconnect client (Spice) -fail, to fail setting password if there is a client connected (Spice)
-
- 07 7月, 2011 2 次提交
-
-
由 Eric Blake 提交于
The next patch wants to adjust an end pointer to trim trailing spaces but without modifying the underlying string, but a more generally useful ability to trim trailing spaces in place is also worth providing. * src/util/util.h (virTrimSpaces, virSkipSpacesBackwards): New prototypes. * src/util/util.c (virTrimSpaces, virSkipSpacesBackwards): New functions. * src/libvirt_private.syms (util.h): Export new functions. Inspired by a patch by Minoru Usui.
-
由 Eric Blake 提交于
Most clients of virSkipSpaces don't want to omit backslashes. Also, open-coding the list of spaces is not as nice as using c_isspace. * src/util/util.c (virSkipSpaces): Use c_isspace. (virSkipSpacesAndBackslash): New function. * src/util/util.h (virSkipSpacesAndBackslash): New prototype. * src/xen/xend_internal.c (sexpr_to_xend_topology): Update caller. * src/libvirt_private.syms (util.h): Export new function.
-
- 06 7月, 2011 1 次提交
-
-
由 Guannan Ren 提交于
add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach Initialize three state value of device driver to 1. This is just for a new call to qemudNodeDeviceReAttach()
-
- 28 6月, 2011 2 次提交
-
-
由 Daniel P. Berrange 提交于
Add a new security driver method for labelling an FD with the process label, rather than the image label * src/libvirt_private.syms, src/security/security_apparmor.c, src/security/security_dac.c, src/security/security_driver.h, src/security/security_manager.c, src/security/security_manager.h, src/security/security_selinux.c, src/security/security_stack.c: Add virSecurityManagerSetProcessFDLabel & impl
-
由 Daniel P. Berrange 提交于
The virSecurityManagerSetFDLabel method is used to label file descriptors associated with disk images. There will shortly be a need to label other file descriptors in a different way. So the current name is ambiguous. Rename the method to virSecurityManagerSetImageFDLabel to clarify its purpose * src/libvirt_private.syms, src/qemu/qemu_migration.c, src/qemu/qemu_process.c, src/security/security_apparmor.c, src/security/security_dac.c, src/security/security_driver.h, src/security/security_manager.c, src/security/security_manager.h, src/security/security_selinux.c, src/security/security_stack.c: s/FDLabel/ImageFDLabel/
-
- 27 6月, 2011 1 次提交
-
-
由 Eric Blake 提交于
We already have a public virDomainPinVcpu, which implies that Pin and Vcpu are treated as separate words. Unreleased commit e261987c introduced virDomainGetVcpupinInfo as the first public API that used Vcpupin, although we had prior internal uses of that spelling. For consistency, change the spelling to be two words everywhere, regardless of whether pin comes first or last. * daemon/remote.c: Treat vcpu and pin as separate words. * include/libvirt/libvirt.h.in: Likewise. * src/conf/domain_conf.c: Likewise. * src/conf/domain_conf.h: Likewise. * src/driver.h: Likewise. * src/libvirt.c: Likewise. * src/libvirt_private.syms: Likewise. * src/libvirt_public.syms: Likewise. * src/libxl/libxl_driver.c: Likewise. * src/qemu/qemu_driver.c: Likewise. * src/remote/remote_driver.c: Likewise. * src/xen/xend_internal.c: Likewise. * tools/virsh.c: Likewise. * src/remote/remote_protocol.x: Likewise. * src/remote_protocol-structs: Likewise. Suggested by Matthias Bolte.
-
- 25 6月, 2011 3 次提交
-
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
Triggered a linker error on MinGW.
-
由 Michal Novotny 提交于
Signed-off-by: NMichal Novotny <minovotn@redhat.com>
-
- 24 6月, 2011 1 次提交
-
-
由 Eric Blake 提交于
This reverts commit 12cd77a0. Conflicts: python/libvirt-override-virConnect.py python/libvirt-override.c src/remote/remote_protocol.x
-
- 23 6月, 2011 2 次提交
-
-
由 Stefan Berger 提交于
In a second cleanup step this patch makes several interface functions from macvtap.c commonly available by moving them into interface.c and prefixing their names with 'iface'. Those functions taking Linux-specific structures as parameters are only visible on Linux. ifaceRestoreMacAddress returns the return code from the ifaceSetMacAddr call and display an error message if setting the MAC address did not work. The caller is unchanged and still ignores the return code (which is ok).
-
由 Stefan Berger 提交于
In a first cleanup step, make nlComm from macvtap.c commonly available for other code to use. Since nlComm uses Linux-specific structures as parameters it's prototype is only visible on Linux.
-
- 22 6月, 2011 1 次提交
-
-
由 Michal Privoznik 提交于
For virtio disks and interfaces, qemu allows users to enable or disable ioeventfd feature. This means, qemu can execute domain code, while another thread waits for I/O event. Basically, in some cases it is win, in some loss. This feature is available via 'ioeventfd' attribute in disk and interface <driver> element. It accepts 'on' and 'off'. Leaving this attribute out defaults to hypervisor decision.
-
- 21 6月, 2011 2 次提交
-
-
由 Dirk Herrendoerfer 提交于
The following patch addresses the problem that when a PASSTHROUGH mode DIRECT NIC connection is made the MAC address of the NIC is not automatically set and reset to the configured VM MAC and back again. The attached patch fixes this problem by setting and resetting the MAC while remembering the previous setting while the VM is running. This also works if libvirtd is restarted while the VM is running. the patch passes make syntax-check
-
由 Cole Robinson 提交于
Since we virEventRegisterDefaultImpl is now a public API, callers need a way to invoke the default registered Handle and Timeout functions. We already have general functions for these internally, so promote them to the public API. v2: Actually add APIs to libvirt.h
-
- 20 6月, 2011 2 次提交
-
-
由 Taku Izumi 提交于
This patch add the private API (virDomainVcpupinDel). This API can delete the vcpupin setting of a specified virtual cpu. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
由 Osier Yang 提交于
* src/conf/domain_conf.h: Introduce one new struct for representing NUMA tuning related stuffs. * src/conf/domain_conf.c: Parse and format numatune XML.
-
- 16 6月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Detected by autobuild.sh, when targetting mingw. Introduced in commit 98bfdff1. * src/libvirt_private.syms: Fix typos.
-
- 15 6月, 2011 4 次提交
-
-
由 Adam Litke 提交于
When an operation started by virDomainBlockPullAll completes (either with success or with failure), raise an event to indicate the final status. This allows an API user to avoid polling on virDomainBlockPullInfo if they would prefer to use the event mechanism. * daemon/remote.c: Dispatch events to client * include/libvirt/libvirt.h.in: Define event ID and callback signature * src/conf/domain_event.c, src/conf/domain_event.h, src/libvirt_private.syms: Extend API to handle the new event * src/qemu/qemu_driver.c: Connect to the QEMU monitor event for block_stream completion and emit a libvirt block pull event * src/remote/remote_driver.c: Receive and dispatch events to application * src/remote/remote_protocol.x: Wire protocol definition for the event * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event from QEMU monitor Signed-off-by: NAdam Litke <agl@us.ibm.com>
-
由 Marc-André Lureau 提交于
From a security pov copy and paste between the guest and the client is not always desirable. So we need to be able to enable/disable this. The best place to do this from an administration pov is on the hypervisor, so the qemu cmdline is getting a spice disable-copy-paste option, see bug 693645. Example qemu invocation: qemu -spice port=5932,disable-ticketing,disable-copy-paste https://bugzilla.redhat.com/show_bug.cgi?id=693661
-
由 Minoru Usui 提交于
Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>
-
由 Minoru Usui 提交于
Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>
-
- 13 6月, 2011 1 次提交
-
-
由 Jiri Denemark 提交于
-