Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To bring in line with new naming practice, rename the=
src/util/cgroup.{h,c} files to vircgroup.{h,c}
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Introduce a 'virArch' enum for CPU architectures. Include
data type providing wordsize and endianness, and APIs to
query this info and convert to/from enum and string form.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This adds support for host device passthrough with the
LXC driver. Since there is only a single kernel image,
it doesn't make sense to pass through PCI devices, but
USB devices are fine. For the latter we merely need to
make the /dev/bus/usb/NNN/MMM character device exist
in the container's /dev
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virtlockd daemon scripts were lousy, when compared to their
counterparts in daemon/Makefile.am.  In particular, when init
scripts were selected, this resulted in 'make distcheck' failing
due to failure to clean up src/virtlockd.init.

* src/Makefile.am (install-systemd): Fix dependencies.  Use MKDIR_P.
(uninstall-systemd): Remove empty directory.  Use fewer processes.
(install-init, install-sysconfig): Use MKDIR_P.
(uninstall-init): Remove correct file, and also empty directory.
(uninstall-sysconfig): Remove empty directory.
(DISTCLEANFILES): Clean up trivially built sources.

With sanlock enabled, only one of those files was installed.

* src/Makefile.am (libvirt.syms): Let cat loop for us.

$(srcdir) is already part of $$file since commit f1f9a7ac.

The default lockd driver behavour is to acquire leases
directly on the disk files. This introduces an alternative
mode, where leases are acquire indirectly on a file that
is based on a SHA256 hash of the disk filename.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This adds a 'lockd' lock driver which is just a client which
talks to the lockd daemon to perform all locking. This will
be the default lock driver for any hypervisor which needs one.

* src/Makefile.am: Add lockd.so plugin
* src/locking/lock_driver_lockd.c: Lockd driver impl
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This enhancement virtlockd so that it can receive a pre-opened
UNIX domain socket from systemd at launch time, and adds the
systemd service/socket unit files

* daemon/libvirtd.service.in: Require virtlockd to be running
* libvirt.spec.in: Add virtlockd systemd files
* src/Makefile.am: Install systemd files
* src/locking/lock_daemon.c: Support socket activation
* src/locking/virtlockd.service.in, src/locking/virtlockd.socket.in:
  systemd unit files
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h:
  Add virNetServerServiceNewFD() method
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add virNetSocketNewListenFD
  method
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Introduce a lock_daemon_dispatch.c file which implements the
server side dispatcher the RPC APIs previously defined in the
lock protocol.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virtlockd daemon will be responsible for managing locks
on virtual machines. Communication will be via the standard
RPC infrastructure. This provides the XDR protocol definition

* src/locking/lock_protocol.x: Wire protocol for virtlockd
* src/Makefile.am: Include lock_protocol.[ch] in virtlockd
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virtlockd daemon will maintain locks on behalf of libvirtd.
There are two reasons for it to be separate

 - Avoid risk of other libvirtd threads accidentally
   releasing fcntl() locks by opening + closing a file
   that is locked
 - Ensure locks can be preserved across libvirtd restarts.
   virtlockd will need to be able to re-exec itself while
   maintaining locks. This is simpler to achieve if its
   sole job is maintaining locks
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

make check fails in check-symsorting if configure is not run in
the source directory. Prefixing symfile names with $(srcdir)
fixes this.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Add check-symsorting.pl to perform case-insensitive alphabetical
sorting of groups of symbols. Fix all violations it reports
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Parallels Cloud Server uses virtual networks model for network
configuration. It uses own tools for virtual network management.
So add network driver, which will be responsible for listing
virtual networks and performing different operations on them
(in consequent patched).

This patch only allows listing virtual network names, without
any parameters like DHCP server settings.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

Implement the domainManagedSave, domainHasManagedSaveImage, and
domainManagedSaveRemove functions in the libvirt legacy xen driver.

domainHasManagedSaveImage check the managedsave image from filesystem
everytime. This is different from qemu and libxl driver. In qemu or
libxl driver, there is a hasManagesSave flag in virDomainObjPtr which
is not used in xen legacy driver. This flag could not add into xen
driver ptr either, because the driver ptr will be released at the end of
every libvirt api call. Meanwhile, AFAIK, xen store all the flags in
xen not in libvirt xen driver. There is no need to add this flag in xen.
Signed-off-by: NBamvor Jian Zhang <bjzhang@suse.com>

Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The patch adds the backend driver to support iSCSI format storage pools
and volumes for ESX host. The mapping of ESX iSCSI specifics to Libvirt
is as follows:

1. ESX static iSCSI target <------> Libvirt Storage Pools
2. ESX iSCSI LUNs          <------> Libvirt Storage Volumes.

The above understanding is based on http://libvirt.org/storage.html.

The operation supported on iSCSI pools includes:

1. List storage pools & volumes.
2. Get XML descriptor operaion on pools & volumes.
3. Lookup operation on pools & volumes by name, UUID and path (if applicable).

iSCSI pools does not support operations such as: Create / remove pools
and volumes.

This introduces a few new APIs for dealing with strings.
One to split a char * into a char **, another to join a
char ** into a char *, and finally one to free a char **

There is a simple test suite to validate the edge cases
too. No more need to use the horrible strtok_r() API,
or hand-written code for splitting strings.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To be able todo controlled shutdown/reboot of containers an
API to talk to init via /dev/initctl is required. Fortunately
this is quite straightforward to implement, and is supported
by both sysvinit and systemd. Upstart support for /dev/initctl
is unclear.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

this patch addes fuse support for libvirt lxc.
we can use fuse filesystem to generate sysinfo dynamically,
So we can isolate /proc/meminfo,cpuinfo and so on through
fuse filesystem.

we mount fuse filesystem for every container.
the mount name is libvirt,mount point is
localstatedir/run/libvirt/lxc/containername.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

The patch refactors the current ESX storage driver due to following reasons:

1. Given most of the public APIs exposed by the storage driver in Libvirt
remains same, ESX storage driver should not implement logic specific
for only one supported format (current implementation only supports VMFS).
2. Decoupling interface from specific storage implementation gives us an
extensible design to hook implementation for other supported storage
formats.

This patch refactors the current driver to implement it as a facade pattern i.e.
the driver exposes all the public libvirt APIs, but uses backend drivers to get
the required task done. The backend drivers provide implementation specific to
the type of storage device.

File changes:
------------------
esx_storage_driver.c ----> esx_storage_driver.c (base storage driver)
                     |
                     |---> esx_storage_backend_vmfs.c (VMFS backend)

Commit 34e8f63a altered virfile.o to drag in additional symbols,
which in turn led to pulling in other .o files and eventually causing
a link failure when systemtap probes are enabled, such as:

./.libs/libvirt_util.a(libvirt_util_la-event_poll.o): In function `virEventPollRunOnce':
/home/dummy/libvirt/src/util/event_poll.c:614: undefined reference to `libvirt_event_poll_run_semaphore'
./.libs/libvirt_util.a(libvirt_util_la-event_poll.o):(.note.stapsdt+0x24): undefined reference to `libvirt_event_poll_add_handle_semaphore'

Even though libvirt_iohelper and libvirt_parthelper don't directly
use the portion of virfile.o that drags in probing, it was easier
to satisfy the linker and get the build back up, than to figure out
whether it is even possible or worth trying to disentangle the mess.

* src/Makefile.am (libvirt_iohelper_LDADD)
(libvirt_parthelper_LDADD): Use libvirt_probes.lo when needed.

Missing entry for cpu_ppc_data.h added to fix RPM build.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence

  threadA: fd1 = open("foo")
  threadB: fd2 = open("foo")
  threadA: virFileLock(fd1)
  threadB: virFileLock(fd2)
  threadB: close(fd2)

you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.

To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace".  This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.

NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.

eg to lock /var/lib/libvirt/images/foo.img the application
might do

   virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
   lockname = md5sum("/var/lib/libvirt/images/foo.img");
   virLockSpaceAcquireLock(lockspace, lockname);

NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.

It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg

   virLockSpacePtr lockspace = virLockSpaceNew(NULL);
   virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");

This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

While the changes to sanlock driver should be stable, the actual
implementation of sanlock_helper is supposed to be replaced in the
future. However, before we can implement a better sanlock_helper, we
need an administrative interface to libvirtd so that the helper can just
pass a "leases lost" event to the particular libvirt driver and
everything else will be taken care of internally. This approach will
also allow libvirt to pass such event to applications and use
appropriate reasons when changing domain states.

The temporary implementation handles all actions directly by calling
appropriate libvirt APIs (which among other things means that it needs
to know the credentials required to connect to libvirtd).

Always build all available backends to avoid bit-rot. At run time we
select the correct backend and load it by attempting netcf first and
then udev.

Add a read-only udev based backend for virInterface. Useful for distros
that do not have netcf support yet. Multiple libvirt based utilities use
a HAL based fallback when virInterface is not available which is less
than ideal. This implements:
* virConnectNumOfInterfaces()
* virConnectListInterfaces()
* virConnectNumOfDefinedInterfaces()
* virConnectListDefinedInterfaces()
* virConnectListAllInterfaces()
* virConnectInterfaceLookupByName()
* virConnectInterfaceLookupByMACString()

This reverts part of commit 5468594f; the perl changes in that
patch were sufficient.  Since libvirt.syms is already a generated
file created in part from libvirt_private.syms, we don't need a
second pass over libvirt_private.syms in isolation.

* src/Makefile.am: Undo addition of check-private-symfile.

Currently, we are checking if libvirt.so contains public symbols.
However, sometimes we rename an internal symbol and forget to
change libvirt_private.syms accordingly. Hence, it's safer to check
for internal symbols as well.

There are a number of process related functions spread
across multiple files. Start to consolidate them by
creating a virprocess.{c,h} file
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>