Skip to content

L
libvirt

openeuler / libvirt

通知 3
Star 0
Fork 0
L
libvirt

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 18 11月, 2015 1 次提交
  3. 12 11月, 2015 1 次提交
  5. 11 11月, 2015 1 次提交
  7. 10 11月, 2015 9 次提交
  9. 09 11月, 2015 1 次提交
    • D
      tests: redo test argv file line wrapping · 8afd34f2
      由 Daniel P. Berrange 提交于 
      Back in

  commit bd6c46fa
  Author: Juerg Haefliger <juerg.haefliger@hp.com>
  Date:   Mon Jan 31 06:42:57 2011 -0500

    tests: handle backspace-newline pairs in test input files

all the test argv files were line wrapped so that the args
were less than 80 characters.

The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.

This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.

This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      8afd34f2
  11. 16 10月, 2015 1 次提交
    • J
      qemu: Fix qemu startup check for QEMU_CAPS_OBJECT_IOTHREAD · cc2d49f9
      由 John Ferlan 提交于 
      https://bugzilla.redhat.com/show_bug.cgi?id=1249981

When qemuDomainPinIOThread was added in commit id 'fb562614', a check
for the IOThread capability was not needed since a check for iothreadpids
covered the condition where the support for IOThreads was not present.
The iothreadpids array was only created if qemuProcessDetectIOThreadPIDs
was able to query the monitor for IOThreads. It would only do that if
the QEMU_CAPS_OBJECT_IOTHREAD capability was set.

However, when iothreadids were added in commit id '8d4614a5' and the
check for iothreadpids was replaced by a search through the iothreadids[]
array for the matching iothread_id that left open the possibility that
an iothreadids[] array was defined, but the entries essentially pointed
to elements with only the 'iothread_id' defined leaving the 'thread_id'
value of 0 and eventually the cpumap entry of NULL.

This was because, the original IOThreads commit id '72edaae7' only
checked if IOThreads were defined and if the emulator had the IOThreads
capability, then IOThread objects were added at startup. The "capability
failure" check was only done when a disk was assigned to an IOThread in
qemuCheckIOThreads. This was because the initial implementation had no way
to dynamically add IOThreads, but it was possible to dynamically add a
disk to the domain. So the decision was if the domain supported it, then
add the IOThread objects. Then if a disk with an IOThread defined was
added, it could check the capability and fail to add if not there. This
just meant the 'iothreads' value was essentially ignored.

Eventually commit id 'a27ed6e7' allowed for the dynamic addition and
deletion of IOThread objects. So it was no longer necessary to generate
IOThread objects to dynamically attach a disk to. However, the startup
and disk check code was not modified to reflect this.

This patch will move the capability failure check to when IOThread
objects are being added to the command line. Thus a domain that has
IOThreads defined will not be started if the emulator doesn't support
the capability. This means when qemuCheckIOThreads is called to add
a disk, it's no longer necessary to check the capability. Instead the
code can use the IOThreadFind call to indicate that the IOThread
doesn't exist.

Finally because it could be possible to have a domain running with the
iothreadids[] defined prior to this change if libvirtd is restarted each
having mostly empty elements, qemuProcessDetectIOThreadPIDs will check
if there are niothreadids when the QEMU_CAPS_OBJECT_IOTHREAD capability
check fails and remove the elements and array if it exists.

With these changes in place, it turns out the cputune-numatune test
was failing because the right bit wasn't set in the test. So used the
opportunity to fix that and create a test that would expect to fail
with some sort of iothreads defined and used, but not having the
correct capability.
      cc2d49f9
  13. 06 10月, 2015 3 次提交
  15. 02 10月, 2015 3 次提交
  17. 23 9月, 2015 1 次提交
    • P
      qemu: Align memory module sizes to 2MiB · 624ec1c2
      由 Peter Krempa 提交于 
      My original implementation was based on a qemu version that still did
not have all the checks in place. Using sizes that would align to odd
megabyte increments will produce the following error:

qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: backend memory size must be multiple of 0x200000
qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: Device 'pc-dimm' could not be initialized

Introduce an alignment retrieval function for memory devices and use it
to align the devices separately and modify a test case to verify it.
      624ec1c2
  19. 22 9月, 2015 3 次提交
  21. 08 9月, 2015 1 次提交
  23. 02 9月, 2015 1 次提交
    • J
      qemu: add udp interface support · 5c668a78
      由 Jonathan Toppins 提交于 
      Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.

The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.

<interface type='udp'>
  <mac address='52:54:00:5c:67:56'/>
  <source address='127.0.0.1' port='11112'>
    <local address='127.0.0.1' port='22222'/>
  </source>
  <model type='virtio'/>
  <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>

QEMU call:
	-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222

Notice the xml "local" entry becomes the "localaddr" for the qemu call.

reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.htmlSigned-off-by: NJonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
      5c668a78
  25. 24 8月, 2015 1 次提交
  27. 10 8月, 2015 11 次提交
    • M
      qemu: Enable ioeventfd usage for virtio-scsi controllers · cf040445
      由 Martin Kletzander 提交于 
      Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1150484Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      cf040445
    • M
      conf: Add ioeventfd option for controllers · 35eecdde
      由 Martin Kletzander 提交于 
      This will be used with a virtio-scsi controller later on.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      35eecdde
    • L
      qemu: support new pci controller model "pcie-switch-downstream-port" · 7d69387c
      由 Laine Stump 提交于 
      This is backed by the qemu device xio3130-downstream. It can only be
connected to a pcie-switch-upstream-port (x3130-upstream) on the
upstream side.
      7d69387c
    • L
      conf: new pcie-controller model "pcie-switch-downstream-port" · 76379a6e
      由 Laine Stump 提交于 
      This controller can be connected only to a port on a
pcie-switch-upstream-port. It provides a single hotpluggable port that
will accept any PCI or PCIe device, as well as any device requiring a
pcie-*-port (the only current example of such a device is the
pcie-switch-upstream-port).
      76379a6e
    • L
      qemu: support new pci controller model "pcie-switch-upstream-port" · cb99086d
      由 Laine Stump 提交于 
      this is backed by the qemu device x3130-upstream. It can only plug
into a pcie-root-port or pcie-switch-downstream-port.
      cb99086d
    • L
      conf: new pci controller model "pcie-switch-upstream-port" · 38ea9515
      由 Laine Stump 提交于 
      This controller can be connected only to a pcie-root-port or a
pcie-switch-downstream-port (which will be added in a later patch),
which is the reason for the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_PORT. A pcie-switch-upstream-port provides
32 ports (slot=0 to slot=31) on the downstream side, which can only
have pci controllers of model "pcie-switch-downstream-port" plugged
into them, which is the reason for the other new connect type
VIR_PCI_CONNECT_TYPE_PCIE_SWITCH.
      38ea9515
    • L
      qemu: support new pci controller model "pcie-root-port" · 16328520
      由 Laine Stump 提交于 
      This is backed by the qemu device ioh3420.

chassis and port from the <target> subelement are used to store/set the
respective qemu device options for the ioh3420. Currently, chassis is
set to be the index of the controller, and port is set to
"(slot << 3) + function" (per suggestion from Alex Williamson).
      16328520
    • L
      conf: new pci controller model "pcie-root-port" · dce3b8be
      由 Laine Stump 提交于 
      This controller can be connected (at domain startup time only - not
hotpluggable) only to a port on the pcie root complex ("pcie-root" in
libvirt config), hence the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_ROOT. It provides a hotpluggable port that
will accept any PCI or PCIe device.

New attributes must be added to the controller <target> subelement for
this - chassis and port are guest-visible option values that will be
set by libvirt with values derived from the controller's index and pci
address information.
      dce3b8be
    • L
      qemu: implement <target chassisNr='n'/> subelement/attribute of <controller> · 18c10451
      由 Laine Stump 提交于 
      This uses the new subelement/attribute in two ways:

1) If a "pci-bridge" pci controller has no chassisNr attribute, it
will automatically be set to the controller's index as soon as the
controller's PCI address is known (during
qemuDomainAssignPCIAddresses()).

2) when creating the commandline for a pci-bridge device, chassisNr
will be used to set qemu's chassis_nr option (rather than the previous
practice of hard-coding it to the controller's index).
      18c10451
    • L
      conf: add new <target> subelement with chassisNr attribute to <controller> · 8dc88aee
      由 Laine Stump 提交于 
      There are some configuration options to some types of pci controllers
that are currently automatically derived from other parts of the
controller's configuration. For example, in qemu a pci-bridge
controller has an option that is called "chassis_nr"; up until now
libvirt has always set chassis_nr to the index of the pci-bridge. So
this:

  <controller type='pci' model='pci-bridge' index='2'/>

will always result in:

  -device pci-bridge,chassis_nr=2,...

on the qemu commandline. In the future we may decide there is a better
way to derive that option, but even in that case we will need for
existing domains to retain the same chassis_nr they were using in the
past - that is something that is visible to the guest so it is part of
the guest ABI and changing it would lead to problems for migrating
guests (or just guests with very picky OSes).

The <target> subelement has been added as a place to put the new
"chassisNr" attribute that will be filled in by libvirt when it
auto-generates the chassisNr; it will be saved in the config, then
reused any time the domain is started:

  <controller type='pci' model='pci-bridge' index='2'>
    <model type='pci-bridge'/>
    <target chassisNr='2'/>
  </controller>

The one oddity of all this is that if the controller configuration
is changed (for example to change the index or the pci address
where the controller is plugged in), the items in <target> will
*not* be re-generated, which might lead to conflict. I can't
really see any way around this, but fortunately if there is a
material conflict qemu will let us know and we will pass that on
to the user.
      8dc88aee
    • L
      conf: add new <model> subelement with name attribute to <controller> · bf202510
      由 Laine Stump 提交于 
      This new subelement is used in PCI controllers: the toplevel
*attribute* "model" of a controller denotes what kind of PCI
controller is being described, e.g. a "dmi-to-pci-bridge",
"pci-bridge", or "pci-root". But in the future there will be different
implementations of some of those types of PCI controllers, which
behave similarly from libvirt's point of view (and so should have the
same model), but use a different device in qemu (and present
themselves as a different piece of hardware in the guest). In an ideal
world we (i.e. "I") would have thought of that back when the pci
controllers were added, and used some sort of type/class/model
notation (where class was used in the way we are now using model, and
model was used for the actual manufacturer's model number of a
particular family of PCI controller), but that opportunity is long
past, so as an alternative, this patch allows selecting a particular
implementation of a pci controller with the "name" attribute of the
<model> subelement, e.g.:

  <controller type='pci' model='dmi-to-pci-bridge' index='1'>
    <model name='i82801b11-bridge'/>
  </controller>

In this case, "dmi-to-pci-bridge" is the kind of controller (one that
has a single PCIe port upstream, and 32 standard PCI ports downstream,
which are not hotpluggable), and the qemu device to be used to
implement this kind of controller is named "i82801b11-bridge".

Implementing the above now will allow us in the future to add a new
kind of dmi-to-pci-bridge that doesn't use qemu's i82801b11-bridge
device, but instead uses something else (which doesn't yet exist, but
qemu people have been discussing it), all without breaking existing
configs.

(note that for the existing "pci-bridge" type of PCI controller, both
the model attribute and <model> name are 'pci-bridge'. This is just a
coincidence, since it turns out that in this case the device name in
qemu really is a generic 'pci-bridge' rather than being the name of
some real-world chip)
      bf202510
  29. 09 8月, 2015 1 次提交
    • L
      conf: more useful error message when pci function is out of range · f8fe8f03
      由 Laine Stump 提交于 
      If a pci address had a function number out of range, the error message
would be:

  Insufficient specification for PCI address

which is logged by virDevicePCIAddressParseXML() after
virDevicePCIAddressIsValid returns a failure.

This patch enhances virDevicePCIAddressIsValid() to optionally report
the error itself (since it is the place that decides which part of the
address is "invalid"), and uses that feature when calling from
virDevicePCIAddressParseXML(), so that the error will be more useful,
e.g.:

  Invalid PCI address function=0x8, must be <= 7

Previously, virDevicePCIAddressIsValid didn't check for the
theoretical limits of domain or bus, only for slot or function. While
adding log messages, we also correct that ommission. (The RNG for PCI
addresses already enforces this limit, which by the way means that we
can't add any negative tests for this - as far as I know our
domainschematest has no provisions for passing XML that is supposed to
fail).

Note that virDevicePCIAddressIsValid() can only check against the
absolute maximum attribute values for *any* possible PCI controller,
not for the actual maximums of the specific controller that this
device is attaching to; fortunately there is later more specific
validation for guest-side PCI addresses when building the set of
assigned PCI addresses. For host-side PCI addresses (e.g. for
<hostdev> and for network device pools), we rely on the error that
will be logged when it is found that the device doesn't actually
exist.

This resolves:

  https://bugzilla.redhat.com/show_bug.cgi?id=1004596
      f8fe8f03
  31. 04 8月, 2015 1 次提交