Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

This implement handling of <backenddomain name=''/>  parameter introduced
in previous patch.

Works on Xen >= 4.3, because only there libxl supports setting backend
domain by name.  Specifying backend domain by ID or UUID is currently not
supported.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

When initializing a libxl_domain_build_info struct with
libxl_domain_build_info_init(), VNC is enabled by default.  As a
result, VMs configured with no graphics still have VNC enabled.
This behavior is a regression wrt to the legacy Xen driver.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

Do not silently ignore its value. LibXL support only one address, so
refuse multiple IPs.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

On error, libxlMakeDomBuildInfo() frees the caller-provided
libxl_domain_build_info struct embedded in libxl_domain_config,
causing a segfault

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f9c13020700 (LWP 40988)]
(gdb) bt
0  0x00007f9c162f95b4 in free () from /lib64/libc.so.6
1  0x00007f9c0d0965ad in libxl_bitmap_dispose () from
   /usr/lib64/libxenlight.so.4.4
2  0x00007f9c0d0a73bf in libxl_domain_build_info_dispose ()
   from /usr/lib64/libxenlight.so.4.4
3  0x00007f9c0d0a7974 in libxl_domain_config_dispose () from
   /usr/lib64/libxenlight.so.4.4
4  0x00007f9c0d2e00c5 in libxlDomainStart (driver=0x7f9c0400e4e0,
   vm=0x7f9c0412b0d0, start_paused=false, restore_fd=-1) at
   libxl/libxl_domain.c:1323
5  0x00007f9c0d2e1d4b in libxlDomainCreateXML (conn=0x7f9c000009a0,...)
   at libxl/libxl_driver.c:660

Remove the call to libxl_domain_build_info_dispose() from
libxlMakeDomBuildInfo().  On error, callers will dispose the
libxl_domain_config object, which in turn disposes the build info.

With the introduction of the libxlDomainGetEmulatorType function,
it is trivial to support a user-specfied <emulator> in the libxl
driver.  This patch is based loosely on David Scott's old patch
to do the same

https://www.redhat.com/archives/libvir-list/2013-April/msg02119.htmlSigned-off-by: NJim Fehlig <jfehlig@suse.com>

This started as an investigation into an issue where libvirt (using the
libxl driver) and the Xen host, like an old couple, could not agree on
who is responsible for selecting the VNC port to use.

Things usually (and a bit surprisingly) did work because, just like that
old couple, they had the same idea on what to do by default. However it
was possible that this ended up in a big argument.

The problem is that display information exists in two different places:
in the vfbs list and in the build info. And for launching the device model,
only the latter is used. But that never gets initialized from libvirt. So
Xen allows the device model to select a default port while libvirt thinks
it has told Xen that this is done by libvirt (though the vfbs config).

While fixing that, I made a stab at actually evaluating the configuration
of the video device. So that it is now possible to at least decide between
a Cirrus or standard VGA emulation and to modify the VRAM within certain
limits using libvirt.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This patch introduces a function to detect whether the specified
emulator is QEMU_XEN or QEMU_XEN_TRADITIONAL.  Detection is based on the
string "Options specific to the Xen version:" in '$qemu -help' output.
AFAIK, the only qemu containing that string in help output is the
old Xen fork (aka qemu-dm).

Note:
QEMU_XEN means a qemu that contains support for Xen.

QEMU_XEN_TRADITIONAL means Xen's old forked qemu 0.10.2
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Commit 4dfc34c3 missed copying the user-specified keymap to
libxl_domain_build_info struct when creating a VFB device.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The libxl driver was blindly assigning libvirt's
virDomainLifecycleAction to libxl's libxl_action_on_shutdown, when
in fact the various actions take on different values in these enums.

Introduce helpers to properly map the enum values.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This patch focuses on code related to xen.

* src/libxl/libxl_conf.c (libxlCapsInitGuests)
(libxlMakeDomBuildInfo): Correct use of {}.
* src/xen/xen_hypervisor.c (virXen_getvcpusinfo)
(xenHypervisorMakeCapabilitiesInternal): Likewise.
* src/xen/xend_internal.c (xenDaemonOpen)
(xenDaemonDomainMigratePerform, xend_detect_config_version)
(xenDaemonDetachDeviceFlags, xenDaemonDomainMigratePerform)
(xenDaemonDomainBlockPeek): Likewise.
* src/xenapi/xenapi_driver.c (xenapiConnectListDomains)
(xenapiDomainLookupByUUID, xenapiDomainGetOSType): Likewise.
* src/xenconfig/xen_common.c (xenParseCPUFeatures, xenFormatNet):
Likewise.
* src/xenconfig/xen_sxpr.c (xenParseSxpr, xenFormatSxprNet)
(xenFormatSxpr): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit b55cc5f4 did a shallow copy of libxl_{sdl,vnc}_info from the
domain config to the build info, which resulted in double-freeing
strings contained in the structures during cleanup, which later
resulted in a libvirtd crash.  Fix by performing a deep copy of the
structure, VIR_STRDUP'ing embedded strings instead of simply copying
their pointers.

Fixes the following issue reported on the libvirt dev list

https://www.redhat.com/archives/libvir-list/2014-August/msg01112.html

Create a separate typedef for the hostdev union data describing PCI.
Then adjust the code to use the new pointer

For the values "default", "on", "off"

Replaces
virDeviceAddressPCIMulti
virDomainFeatureState
virDomainIoEventFd
virDomainVirtioEventIdx
virDomainDiskCopyOnRead
virDomainMemDump
virDomainPCIRombarMode
virDomainGraphicsSpicePlaybackCompression

This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.

The XML looks like:

<interface type='vhostuser'>
    <mac address='52:54:00:3b:83:1a'/>
    <source type='unix' path='/tmp/vhost.sock' mode='server'/>
    <model type='virtio'/>
</interface>
Signed-off-by: NMichele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

While preparing to add a capability for active commit, I noticed
that the existing code was abusing int for boolean values.

* src/conf/capabilities.h (_virCapsGuestFeature, _virCapsHost)
(virCapabilitiesNew, virCapabilitiesAddGuestFeature): Improve
types.
* src/conf/capabilities.c (virCapabilitiesNew)
(virCapabilitiesAddGuestFeature): Adjust signature.
* src/bhyve/bhyve_capabilities.c (virBhyveCapsBuild): Update
clients.
* src/esx/esx_driver.c (esxCapsInit): Likewise.
* src/libxl/libxl_conf.c (libxlMakeCapabilities): Likewise.
* src/lxc/lxc_conf.c (virLXCDriverCapsInit): Likewise.
* src/openvz/openvz_conf.c (openvzCapsInit): Likewise.
* src/parallels/parallels_driver.c (parallelsBuildCapabilities):
Likewise.
* src/phyp/phyp_driver.c (phypCapsInit): Likewise.
* src/qemu/qemu_capabilities.c (virQEMUCapsInit)
(virQEMUCapsInitGuestFromBinary): Likewise.
* src/security/virt-aa-helper.c (get_definition): Likewise.
* src/test/test_driver.c (testBuildCapabilities): Likewise.
* src/uml/uml_conf.c (umlCapsInit): Likewise.
* src/vbox/vbox_tmpl.c (vboxCapsInit): Likewise.
* src/vmware/vmware_conf.c (vmwareCapsInit): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorBuildCapabilities):
Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject): Likewise.
* tests/qemucaps2xmltest.c (testGetCaps): Likewise.
* tests/testutils.c (virTestGenericCapsInit): Likewise.
* tests/testutilslxc.c (testLXCCapsInit): Likewise.
* tests/testutilsqemu.c (testQemuCapsInit): Likewise.
* tests/testutilsxen.c (testXenCapsInit): Likewise.
* tests/vircaps2xmltest.c (buildVirCapabilities): Likewise.
* tests/vircapstest.c (buildNUMATopology): Likewise.
* tests/vmx2xmltest.c (testCapsInit): Likewise.
* tests/xml2vmxtest.c (testCapsInit): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

This was converted to a typedef in 5a2bd4c9 "conf: more enum
cleanups in "src/conf/domain_conf.h"" causing:
    libxl/libxl_conf.c: In function 'libxlDiskSetDiscard':
    libxl/libxl_conf.c:724:19: error: conversion to incomplete type
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>

Translate libvirt discard settings into libxl-4.5 discard settings.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>

In the future we might need to track state of individual images. Move
the readonly and shared flags to the virStorageSource struct so that we
can keep them in a per-image basis.

libxl does not support save, restore, or migrate on all architectures,
notably ARM.  Detect whether libxl supports these operations using
LIBXL_HAVE_NO_SUSPEND_RESUME.  If not supported, drop advertisement of
<migration_features>.

Found by Ian Campbell while improving Xen's OSSTEST infrastructure

http://lists.xen.org/archives/html/xen-devel/2014-06/msg02171.html

The libxl driver currently sets the disk backend to
LIBXL_DISK_BACKEND_TAP when <driver name='file'> is specified
in the <disk> config.  qdisk should be prefered with this
configuration, otherwise existing configuration such as the
following, which worked with the old Xen driver, will not work
with the libxl driver

  <disk type='file' device='cdrom'>
    <driver name='file'/>
    <source file='/path/to/some/iso'/>
    <target dev='hdc' bus='ide'/>
    <readonly/>
  </disk>

In addition, tap performs poorly compared to qdisk.

Generally, <interface> ... <script> is only supported for
type='ethernet'.  Due to the long and pervasive use of

  <interface type='bridge'>
    ...
    <script path='foo'/>
  </interface>

in Xen domain configuration, it was agreed to allow the use
of <script> with type='bridge' for backwards compatibility.  See
the following discussion thread

http://www.redhat.com/archives/libvir-list/2013-April/msg00755.html

This patch limits the use of <script> to interface types ethernet
and bridge, raising an unsupported config error if <script> is
specified for all other interface types.

While at it, use VIR_ERR_CONFIG_UNSUPPORTED instead of
VIR_ERR_INTERNAL_ERROR when reporting unsupported interface types.

Add support for <interface type='network'> in the libxl driver.

There are two places where you'll find info on page sizes. The first
one is under <cpu/> element, where all supported pages sizes are
listed. Then the second one is under each <cell/> element which refers
to concrete NUMA node. At this place, the size of page's pool is
reported. So the capabilities XML looks something like this:

<capabilities>

  <host>
    <uuid>01281cda-f352-cb11-a9db-e905fe22010c</uuid>
    <cpu>
      <arch>x86_64</arch>
      <model>Westmere</model>
      <vendor>Intel</vendor>
      <topology sockets='1' cores='1' threads='1'/>
      ...
      <pages unit='KiB' size='4'/>
      <pages unit='KiB' size='2048'/>
      <pages unit='KiB' size='1048576'/>
    </cpu>
    ...
    <topology>
      <cells num='4'>
        <cell id='0'>
          <memory unit='KiB'>4054408</memory>
          <pages unit='KiB' size='4'>1013602</pages>
          <pages unit='KiB' size='2048'>3</pages>
          <pages unit='KiB' size='1048576'>1</pages>
          <distances/>
          <cpus num='1'>
            <cpu id='0' socket_id='0' core_id='0' siblings='0'/>
          </cpus>
        </cell>
        <cell id='1'>
          <memory unit='KiB'>4071072</memory>
          <pages unit='KiB' size='4'>1017768</pages>
          <pages unit='KiB' size='2048'>3</pages>
          <pages unit='KiB' size='1048576'>1</pages>
          <distances/>
          <cpus num='1'>
            <cpu id='1' socket_id='0' core_id='0' siblings='1'/>
          </cpus>
        </cell>
        ...
      </cells>
    </topology>
    ...
  </host>

  <guest/>

</capabilities>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

If user or management application wants to create a guest,
it may be useful to know the cost of internode latencies
before the guest resources are pinned. For example:

<capabilities>

  <host>
    ...
    <topology>
      <cells num='2'>
        <cell id='0'>
          <memory unit='KiB'>4004132</memory>
          <distances>
            <sibling id='0' value='10'/>
            <sibling id='1' value='20'/>
          </distances>
          <cpus num='2'>
            <cpu id='0' socket_id='0' core_id='0' siblings='0'/>
            <cpu id='2' socket_id='0' core_id='2' siblings='2'/>
          </cpus>
        </cell>
        <cell id='1'>
          <memory unit='KiB'>4030064</memory>
          <distances>
            <sibling id='0' value='20'/>
            <sibling id='1' value='10'/>
          </distances>
          <cpus num='2'>
            <cpu id='1' socket_id='0' core_id='0' siblings='1'/>
            <cpu id='3' socket_id='0' core_id='2' siblings='3'/>
          </cpus>
        </cell>
      </cells>
    </topology>
    ...
  </host>
  ...
</capabilities>

We can see the distance from node1 to node0 is 20 and within nodes 10.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

To allow the test suite to creat the XML option object,
move the virDomainXMLOptionNew call into a libxlCreateXMLConf
method.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To make it easier to test, change libxlBuildDomainConfig so
that it takes a virPortAllocatorPtr instead of the larger
libxlDriverPrivatePtr object.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To make it easier to unit test, change libxlBuildDomainConfig
so that it takes 'virDomainDefPtr' and 'libxl_ctx *' objects
as separate parameters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A VIR_DOMAIN_NET_TYPE_HOSTDEV interface device is really a hostdev
device, which is created by the libxl driver in libxlMakePCIList().
There is no need to create a libxl_device_nic for such hostdev
devices, so skip interfaces of type VIR_DOMAIN_NET_TYPE_HOSTDEV in
libxlMakeNicList().
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The XML config for a CDROM device can be without a source path,
indicating that there is no media present. Without this change
the libxl driver fails to start a guest in that case because
the libxl library checks for the LIBXL_DISK_FORMAT_EMPTY format
type and tries to stat the NULL pointer that gets passed on.

> libxl: error: libxl_device.c:265:libxl__device_disk_set_backend:
> Disk vdev=hdc failed to stat: (null): Bad address
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

Commit d9f19c30 moved a lot of the
configuration setup into libxlDriverConfigNew().
However that tries to create the libxl/libxl-driver.log before the
libxl directory gets created in libxlStateInitialize().

This causes the daemon to fail on systems that have not had the directory
created before.

Move the code to create the libxl directory into libxlDriverConfigNew().
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

Part of a series of cleanups to use new accessor methods.

* src/libxl/libxl_conf.c (libxlMakeDisk): Use accessors.
* src/libxl/libxl_driver.c (libxlDomainChangeEjectableMedia)
(libxlDomainAttachDeviceDiskLive): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Move libxlDoNodeGetInfo from libxl_driver to libxl_conf
for use by other libxl modules.  For consistency, rename to
libxlDriverNodeGetInfo.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

libxl uses the libxl_vnc_info and libxl_sdl_info fields from the
hvm union in libxl_domain_build_info struct when generating QEMU
args for VNC or SDL.  These fields were left unset by the libxl
driver, causing libxl to ignore any user settings.  E.g. with

  <graphics type='vnc' port='5950'/>

port would be ignored and QEMU would instead be invoked with

  -vnc 127.0.0.1:0,to=99

Unlike the libxl_domain_config struct, the libxl_domain_build_info
contains only a single libxl_vnc_info and libxl_sdl_info, so
populate these fields from the first vfb in
libxl_domain_config->vfbs.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NDavid Kiarie <davidkiarie4@gmail.com>

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add pci passthrough to libxl driver, support attach-device, detach-device and
start a vm with pci hostdev specified.

Only tested on v7 but the v8 equivalent seems pretty obvious.

XEN_CAP_REGEX already accepts more than it should (e.g. x86_64p or x86_32be)
but I have stuck with the existing pattern.

With this I can create a guest from:
  <domain type='xen'>
    <name>libvirt-test</name>
    <uuid>6343998e-9eda-11e3-98f6-77252a7d02f3</uuid>
    <memory>393216</memory>
    <currentMemory>393216</currentMemory>
    <vcpu>1</vcpu>
    <os>
      <type arch='armv7l' machine='xenpv'>linux</type>
      <kernel>/boot/vmlinuz-arm-native</kernel>
      <cmdline>console=hvc0 earlyprintk debug root=/dev/xvda1</cmdline>
    </os>
    <clock offset='utc'/>
    <on_poweroff>destroy</on_poweroff>
    <on_reboot>restart</on_reboot>
    <on_crash>destroy</on_crash>
    <devices>
      <disk type='block' device='disk'>
        <source dev='/dev/marilith-n0/debian-disk'/>
        <target dev='xvda1'/>
      </disk>
      <interface type='bridge'>
        <mac address='8e:a7:8e:3c:f4:f6'/>
        <source bridge='xenbr0'/>
      </interface>
    </devices>
  </domain>

Using virsh create and I can destroy it too.

Currently virsh console fails with:
  Connected to domain libvirt-test
  Escape character is ^]
  error: internal error: cannot find character device <null>

I haven't investigated yet.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NEric Blake <eblake@redhat.com>