Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.

Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.

* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface

I tested both OpenBSD and cygwin; both failed 'make check' with:

  GEN    check-symfile
Can't return outside a subroutine at ./check-symfile.pl line 13.

Perl requires 'exit 77' instead of 'return 77' in that context,
but even with that tweak, the build still fails, since the exit
code of 77 is only special to explicit TESTS=foo listings, and
not to make-only dependency rules where we are not going through
automake's test framework.

* src/check-symfile.pl: Kill bogus platform check...
* src/Makefile.am (check-symfile): ...and replace with an automake
conditional.

On OpenBSD, clock_gettime() exists in libc rather than librt, and
blindly linking with -lrt made the build fail.  Gnulib already
did the work for determining which libraries to use, so we should
reuse that work rather than doing it ourselves.

* bootstrap.conf (gnulib_modules): Pull in clock-time.
* configure.ac (RT_LIBS): Drop.
* src/Makefile.am (libvirt_util_la_LIBADD): Use gnulib variable
instead.
* src/util/virtime.c (includes): Simplify.

When libvirt_lxc is built, it uses the utility library and #includes
virnetdev.h, which #includes virnetlink.h, which includes
<netlink/msg.h>.

Normally, the netlink include directory would be just off
/usr/include, so that wouldn't create a problem, but on Fedora and
RHEL systems using libnl3, the libnl includes have been moved into
/usr/include/libnl3 (to allow concurrent installation of libnl-1.1).

All other binaries that need it have added $(LIBNL_CFLAGS) to their
CFLAGS, but not libvirt_lxc, so it fails to build on Fedora and RHEL
that have only libnl3-devel installed. This was previously unnoticed
because everyone was building with libnl headers in
/usr/include/netlink (even on systems with the headers in
/usr/include/libnl3/netlink, many people (like me) usually also have
the libnl1.1 headers in /usr/include/netlink).

This patch adds the necessary CFLAGS for libvirt_lxc.

Note that we don't need to add $(LIBNL_LIBS) to the LDADD for this
binary, because it never directly calls libnl functions, but only
calls them indirectly through the util library, which it's already
linking against.

This has several benefits:
1. Future snapshot-related code has a definite place to go (and I
_will_ be adding some)
2. Snapshot errors now use the VIR_FROM_DOMAIN_SNAPSHOT error
classification, which has been underutilized (previously only in
libvirt.c)

* src/conf/domain_conf.h, domain_conf.c: Split...
* src/conf/snapshot_conf.h, snapshot_conf.c: ...into new files.
* src/Makefile.am (DOMAIN_CONF_SOURCES): Build new files.
* po/POTFILES.in: Mark new file for translation.
* src/vbox/vbox_tmpl.c: Update caller.
* src/esx/esx_driver.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_domain.h: Likewise.

Older automake 1.9.6 (hello there, RHEL 5) did not populate
$(builddir), which meant 'make check' failed with:

make[3]: *** No rule to make target `/.libs/libvirt.la', needed by `check-symfile'.  Stop.

For that matter, even newer automake doesn't directly emit rules
to build .libs/libvirt.la; we are better off basing our rules
on the public ./libvirt.la.

* src/Makefile.am (check-symfile): Delete useless variable.

Without this patch, RHEL 5 fails to compile, since the dbus
files lives under /usr/include/dbus-1.0/dbus/dbus.h, and
DBUS_CFLAGS contains -I/usr/include/dbus-1.0.

In file included from network/bridge_driver.c:67:
../src/util/virdbus.h:26:25: error: dbus/dbus.h: No such file or directory

* src/Makefile.am (libvirt_driver_network_impl_la_CFLAGS): Add
DBUS_CFLAGS.

This patch provides basic support for using firewalld's firewall-cmd
rather than then plain eb/ip(6)tables commands.

* configure.ac, spec file: firewalld defaults to enabled if dbus is
  available, otherwise is disabled. If --with_firewalld is explicitly
  requested and dbus is not available, configure will fail.

* bridge_driver: add dbus filters to get the FirewallD1.Reloaded
  signal and DBus.NameOwnerChanged on org.fedoraproject.FirewallD1.
  When these are encountered, reload all the iptables reuls of all
  libvirt's virtual networks (similar to what happens when libvirtd is
  restarted).

* iptables, ebtables: use firewall-cmd's direct passthrough interface
  when available, otherwise use iptables and ebtables commands. This
  decision is made once the first time libvirt calls
  iptables/ebtables, and that decision is maintained for the life of
  libvirtd.

* Note that the nwfilter part of this patch was separated out into
  another patch by Stefan in V2, so that needs to be revised and
  re-reviewed as well.

================

All the configure.ac and specfile changes are unchanged from Thomas'
V3.

V3 re-ran "firewall-cmd --state" every time a new rule was added,
which was extremely inefficient.  V4 uses VIR_ONCE_GLOBAL_INIT to set
up a one-time initialization function.

The VIR_ONCE_GLOBAL_INIT(x) macro references a static function called
vir(Ip|Eb)OnceInit(), which will then be called the first time that
the static function vir(Ip|Eb)TablesInitialize() is called (that
function is defined for you by the macro). This is
thread-safe, so there is no chance of any race.

IMPORTANT NOTE: I've left the VIR_DEBUG messages in these two init
functions (one for iptables, on for ebtables) as VIR_WARN so that I
don't have to turn on all the other debug message just to see
these. Even if this patch doesn't need any other modification, those
messages need to be changed to VIR_DEBUG before pushing.

This one-time initialization works well. However, I've encountered
problems with testing:

1) Whenever I have enabled the firewalld service, *all* attempts to
call firewall-cmd from within libvirtd end with firewall-cmd hanging
internally somewhere. This is *not* the case if firewall-cmd returns
non-0 in response to "firewall-cmd --state" (i.e. *that* command runs
and returns to libvirt successfully.)

2) If I start libvirtd while firewalld is stopped, then start
firewalld later, this triggers libvirtd to reload its iptables rules,
however it also spits out a *ton* of complaints about deletion failing
(I suppose because firewalld has nuked all of libvirt's rules). I
guess we need to suppress those messages (which is a more annoying
problem to fix than you might think, but that's another story).

3) I noticed a few times during this long line of errors that
firewalld made a complaint about "Resource Temporarily
unavailable. Having libvirtd access iptables commands directly at the
same time as firewalld is doing so is apparently problematic.

4) In general, I'm concerned about the "set it once and never change
it" method - if firewalld is disabled at libvirtd startup, causing
libvirtd to always use iptables/ebtables directly, this won't cause
*terrible* problems, but if libvirtd decides to use firewall-cmd and
firewalld is later disabled, libvirtd will not be able to recover.

Commit 1d22ba95 was complete at the time, but we have since
reintroduced a warning that is fixed in the same manner:

  CCLD   storagebackendsheepdogtest

*** Warning: Linking the executable storagebackendsheepdogtest against the loadable module
*** libvirt_driver_storage.so is not portable!

* src/Makefile.am (libvirt_driver_storage.la): Factor into new
convenience library libvirt_driver_storage_impl.la.
* tests/Makefile.am (storagebackendsheepdogtest_LDADD): Link to
convenience library, not shared library.

This patch adds helper functions that enable us to use libssh2 in
conjunction with libvirt's virNetSockets for ssh transport instead of
spawning "ssh" client process.

This implemetation supports tunneled plaintext, keyboard-interactive,
private key, ssh agent based and null authentication. Libvirt's Auth
callback is used for interaction with the user. (Keyboard interactive
authentication, adding of host keys, private key passphrases). This
enables seamless integration into the application using libvirt. No
helpers as "ssh-askpass" are needed.

Reading and writing of OpenSSH style "known_hosts" files is supported.

Communication is done using SSH exec channel, where the user may specify
arbitrary command to be executed on the remote side and reads and writes
to/from stdin/out are sent through the ssh channel. Usage of stderr is
not (yet) supported.

Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c

Refactoring existing code without causing any functional changes to
prepare for new code.

This patch makes the code reusable.
Signed-off-by: NShradha Shah <sshah@solarflare.com>

'make distcheck' fails because the generated ESX and HyperV files
are (intentionally) marked read-only, but since the stamp file was
missing, make assumes they need to be rebuilt.  Shipping the stamp
file solves the problem.

* src/Makefile.am (EXTRA_DIST): Ship stamp files.

The following config elements now support a <vlan> subelements:

within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>

Each vlan element must have one or more <tag id='n'/> subelements.  If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.

Some examples:

  <interface type='hostdev'/>
    <vlan>
      <tag id='42'/>
    </vlan>
    <mac address='52:54:00:12:34:56'/>
    ...
  </interface>

  <network>
    <name>vlan-net</name>
    <vlan trunk='yes'>
      <tag id='30'/>
    </vlan>
    <virtualport type='openvswitch'/>
  </network>

  <interface type='network'/>
    <source network='vlan-net'/>
    ...
  </interface>

  <network>
    <name>trunk-vlan</name>
    <vlan>
      <tag id='42'/>
      <tag id='43'/>
    </vlan>
    ...
  </network>

  <network>
    <name>multi</name>
    ...
    <portgroup name='production'/>
      <vlan>
        <tag id='42'/>
      </vlan>
    </portgroup>
    <portgroup name='test'/>
      <vlan>
        <tag id='666'/>
      </vlan>
    </portgroup>
  </network>

  <interface type='network'/>
    <source network='multi' portgroup='test'/>
    ...
  </interface>

IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)

To allow for the possibility of vlan "trunks", which have more than
one vlan tag associated with them, we need a vlan struct. Since it
will be used by multiple files in src/util, src/conf, src/network, and
src/qemu, it must be defined in src/util. Unfortunately there isn't
currently a common file for simple netdev data definitions, so I
created a new file.

Use of ldexp() requires -lm on some platforms; use gnulib to determine
this for our makefile.  Also, optimize virRandomInt() for the case
of a power-of-two limit (actually rather common, given that Daniel
has a pending patch to replace virRandomBits(10) with code that will
default to virRandomInt(1024) on default SELinux settings).

* .gnulib: Update to latest, for ldexp.
* bootstrap.conf (gnulib_modules): Import ldexp.
* src/Makefile.am (libvirt_util_la_CFLAGS): Link with -lm when
needed.
* src/util/virrandom.c (virRandomInt): Optimize powers of 2.

Commit bb705e25 missed that the appArmor helper file also needs to
resolve the new symbols dragged in by domain_conf.c.

* src/Makefile.am (SECURITY_DRIVER_APPARMOR_HELPER_SOURCES): Pull
in datatypes.c.

As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].

* src/Makefile.am:
  - Various indention fixes incidentally
  - Add macro DATATYPES_SOURCES (datatypes.[ch])
  - Link datatypes.[ch] for libvirt_lxc

* src/conf/domain_conf.c:
  - Move all the stuffs from virdomainlist.c into it
  - Use virUnrefDomain and virUnrefDomainSnapshot instead of
    virDomainFree and virDomainSnapshotFree, which are defined
    in libvirt.c, and we don't want to link to it.
  - Remove "if" before "free" the object, as virObjectUnref
    is in the list "useless_free_options".

* src/conf/domain_conf.h:
  - Move all the stuffs from virdomainlist.h into it
  - s/LIST_FILTER/LIST_DOMAINS_FILTER/

* src/libxl/libxl_driver.c:
  - s/LIST_FILTER/LIST_DOMAINS_FILTER/
  - no (include "virdomainlist.h")

* src/libxl/libxl_driver.c: Likewise

* src/lxc/lxc_driver.c: Likewise

* src/openvz/openvz_driver.c: Likewise

* src/parallels/parallels_driver.c: Likewise

* src/qemu/qemu_driver.c: Likewise

* src/test/test_driver.c: Likewise

* src/uml/uml_driver.c: Likewise

* src/vbox/vbox_tmpl.c: Likewise

* src/vmware/vmware_driver.c: Likewise

* tools/virsh-domain-monitor.c: Likewise

* tools/virsh.c: Likewise

Otherwise distcheck can fail with:

  GEN      check-symfile
  Can't open perl script "../../src/check-symfile.pl": No such file or directory
  make[4]: *** [check-symfile] Error 2

libvirt_qemu_probes.stp stopped working after switching to a build
that used --with-driver-modules. This was because the symbols listed
int libvirt_qemu_probes.stp are no longer in $(bindir)/libvirtd, but
are now in $(libdir)/connection-driver/libvirt_driver_qemu.so.

This patch enhances dtrace2systemtap.pl (which generates the .stp
files from .d files) to look for a new "module" setting in the
comments of the .d file (similar to the existing "binary" setting),
and to look for a --with-modules option. If the --with-modules option
is set *and* a "module" setting is present in the .d file, the process
name for the stap line is set to

   $libdir/$module

If either of these isn't true, it reverts to the old behavior.

src/Makefile.am was also modified to add the --with-modules option
when the build calls for it, and src/libvirt_qemu_probes.d has added a
"module" line pointing to the correct .so file for the qemu driver.

This introduces a fairly basic reference counted virObject type
and an associated virClass type, that use atomic operations for
ref counting.

In a global initializer (recommended to be invoked using the
virOnceInit API), a virClass type must be allocated for each
object type. This requires a class name, a "dispose" callback
which will be invoked to free memory associated with the object's
fields, and the size in bytes of the object struct.

eg,

   virClassPtr  connclass = virClassNew("virConnect",
                                        sizeof(virConnect),
                                        virConnectDispose);

The struct for the object, must include 'virObject' as its
first member

eg

  struct _virConnect {
    virObject object;

    virURIPtr uri;
  };

The 'dispose' callback is only responsible for freeing
fields in the object, not the object itself. eg a suitable
impl for the above struct would be

  void virConnectDispose(void *obj) {
     virConnectPtr conn = obj;
     virURIFree(conn->uri);
  }

There is no need to reset fields to 'NULL' or '0' in the
dispose callback, since the entire object will be memset
to 0, and the klass pointer & magic integer fields will
be poisoned with 0xDEADBEEF before being free()d

When creating an instance of an object, one needs simply
pass the virClassPtr eg

   virConnectPtr conn = virObjectNew(connclass);
   if (!conn)
      return NULL;
   conn->uri = virURIParse("foo:///bar")

Object references can be manipulated with

   virObjectRef(conn)
   virObjectUnref(conn)

The latter returns a true value, if the object has been
freed (ie its ref count hit zero)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The recent changes to the testsuite to validate exported symbols
flushed out a case of unconditionally exporting symbols that
were only conditionally compiled under HAVE_AVAHI.

* src/Makefile.am (libvirt_net_rpc_server_la_SOURCES): Compile
virnetservermdns unconditionally.
* configure.ac (HAVE_AVAHI): Drop unused automake conditional.
* src/rpc/virnetservermdns.c: Add fallbacks when Avahi is not
present.

Security manager is not a dynamically loadable driver. Let's avoid the
confusion by renaming libvirt_driver_security library as
libvirt_security_manager.

Security manager is not a dynamically loadable driver, it's a common
infrastructure similar to util, conf, cpu, etc. used by individual
drivers. Such code is allowed to be linked into libvirt.so.

This reverts commit ec5b7bd2 and most of
aae5cfb6.

This patch is supposed to fix virdrivermoduletest failures for qemu and
lxc drivers as well as libvirtd's ability to load qemu and lxc drivers.

There are a few issues with the current virAtomic APIs

 - They require use of a virAtomicInt struct instead of a plain
   int type
 - Several of the methods do not implement memory barriers
 - The methods do not implement compiler re-ordering barriers
 - There is no Win32 native impl

The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.

* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
  ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
  for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
  ops
* tests/viratomictest.c: Test validate to validate safety
  of atomic ops.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Otherwise the file is missing from the dist tarball and distcheck fails

Parallels Cloud Server has one serious discrepancy with libvirt:
libvirt stores domain configuration files in one place, and storage
files in other places (with the API of storage pools and storage volumes).
Parallels Cloud Server stores all domain data in a single directory,
for example, you may have domain with name fedora-15, which will be
located in '/var/parallels/fedora-15.pvm', and it's hard disk image will be
in '/var/parallels/fedora-15.pvm/harddisk1.hdd'.

I've decided to create storage driver, which produces pseudo-volumes
(xml files with volume description), and they will be 'converted' to
real disk images after attaching to a VM.

So if someone creates VM with one hard disk using virt-manager,
at first virt-manager creates a new volume, and then defines a
domain. We can lookup a volume by path in XML domain definition
and find out location of new domain and size of its hard disk.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

Parallels driver is 'stateless', like vmware or openvz drivers.
It collects information about domains during startup using
command-line utility prlctl. VMs in Parallels are identified by UUIDs
or unique names, which can be used as respective fields in
virDomainDef structure. Currently only basic info, like
description, virtual cpus number and memory amount, is implemented.
Querying devices information will be added in the next patches.

Parallels doesn't support non-persistent domains - you can't run
a domain having only disk image, it must always be registered
in system.

Functions for querying domain info have been just copied from
test driver with some changes - they extract needed data from
previously created list of virDomainObj objects.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.

More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

The 'check-symfile' test case was checking the contents of
libvirt.syms against libvirt.so + all of libvirt_driver_XXX.so
This was in fact bogus - libvirt.syms should only refer to
stuff in libvirt.so, but it had some symbols from the various
driver modules in it too. Now that libvirt.syms has been
fixed, the check-symfile test can be simplified to only
consider libvirt.so

The nwfilter and secrets drivers are both stateful and are already
linked directly to libvirtd. Linking them to libvirt.so is thus
wrong, likewise exporting their symbols in libvirt.so is wrong

The network driver is stateful, so it is linked directly to libvirtd,
rather than libvirt.so. Thus there are no network symbols to be exported
in libvirt.so, and libvirt_network.syms can be deleted

This defines a new RPC protocol to be used between the LXC
controller and the libvirtd LXC driver. There is only a
single RPC message defined thus far, an asynchronous "EXIT"
event that is emitted just before the LXC controller process
exits. This provides the LXC driver with details about how
the container shutdown - normally, or abnormally (crashed),
thus allowing the driver to emit better libvirt events.

Emitting the event in the LXC controller requires a few
little tricks with the RPC service. Simply calling the
virNetServiceClientSendMessage does not work, since this
merely queues the message for asynchronous processing.
In addition the main event loop is no longer running at
the point the event is emitted, so no I/O is processed.

Thus after invoking virNetServiceClientSendMessage it is
necessary to mark the client as being in "delayed close"
mode. Then the event loop is run again, until the client
completes its close - this happens only after the queued
message has been fully transmitted. The final complexity
is that it is not safe to run virNetServerQuit() from the
client close callback, since that is invoked from a
context where the server is locked. Thus a zero-second
timer is used to trigger shutdown of the event loop,
causing the controller to finally exit.

* src/Makefile.am: Add rules for generating RPC protocol
  files and dispatch methods
* src/lxc/lxc_controller.c: Emit an RPC event immediately
  before exiting
* src/lxc/lxc_domain.h: Record the shutdown reason
  given by the controller
* src/lxc/lxc_monitor.c, src/lxc/lxc_monitor.h: Register
  RPC program and event handler. Add callback to let
  driver receive EXIT event.
* src/lxc/lxc_process.c: Use monitor exit event to decide
  what kind of domain event to emit
* src/lxc/lxc_protocol.x: Define wire protocol for LXC
  controller monitor.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update the gendispatch.pl script to get a little closer to
being able to generate code for the LXC monitor, by passing
in the struct prefix separately from the procedure prefix.
Also allow method names using virCapitalLetters instead
of vir_underscore_separator
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the code that handles the LXC monitor out of the
lxc_process.c file and into lxc_monitor.{c,h}
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

During refactoring of code, it has proved common to forget to
remove old symbols from the .syms file. While the Win32 linker
will complain about this, the Linux ELF linker does not. The
new test case validates that every symbol listed in the .syms
file actually exists in the built ELF libraries.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If from a clean GIT checkout 'make -j 8' is run, the ESX
and Hyper-V code will be generated multiple times over.
This is because there are multiple files being generated
from one invocation of the generator script. make does not
realize this and so invokes the generator once per file.
This doesn't matter with serialized builds, but with
parallel builds multiple instances of the generator get
run at once.

make[2]: Entering directory `/home/berrange/src/virt/libvirt/src'
  GEN    util/virkeymaps.h
  GEN    remote/remote_protocol.h
  GEN    remote/remote_client_bodies.h
  GEN    remote/qemu_protocol.h
  GEN    remote/qemu_client_bodies.h
  GEN    esx/esx_vi_methods.generated.c
  GEN    esx/esx_vi_methods.generated.h
  GEN    esx/esx_vi_methods.generated.macro
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typetostring
  GEN    esx/esx_vi_types.generated.typefromstring
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_methods.generated.h
  GEN    esx/esx_vi_methods.generated.c
  GEN    esx/esx_vi_methods.generated.macro
  GEN    esx/esx_vi.generated.h
  GEN    esx/esx_vi.generated.c
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typetostring
  GEN    esx/esx_vi_types.generated.typefromstring
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_methods.generated.h
  ...snip...
  GEN    hyperv/hyperv_wmi.generated.h
  GEN    libvirt_qemu_probes.h
  GEN    locking/qemu-sanlock.conf
  GEN    hyperv/hyperv_wmi.generated.c
  GEN    rpc/virnetprotocol.h
  GEN    hyperv/hyperv_wmi_classes.generated.typedef
  GEN    hyperv/hyperv_wmi_classes.generated.h
  GEN    hyperv/hyperv_wmi_classes.generated.c
  GEN    rpc/virkeepaliveprotocol.h
  GEN    remote/remote_protocol.c
  GEN    remote/qemu_protocol.c
  GEN    rpc/virkeepaliveprotocol.c
  GEN    rpc/virnetprotocol.c
  GEN    libvirt.def

Prevent this using a timestamp file to control generation,
as was previously done for the python bindings in commit
a7868e01Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move all the code that manages stop/start of LXC processes
into separate lxc_process.{c,h} file to make the lxc_driver.c
file smaller
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>