CVE-2013-6458

Every API that is going to begin a job should do that before fetching
data from vm->def.

(cherry picked from commit 3b564259)

Every API that is going to begin a job should do that before fetching
data from vm->def.

(cherry picked from commit ff5f30b6)

Conflicts:
	src/qemu/qemu_driver.c - context

CVE-2013-6458

Every API that is going to begin a job should do that before fetching
data from vm->def.

(cherry picked from commit f93d2caa)

CVE-2013-6458

Generally, every API that is going to begin a job should do that before
fetching data from vm->def. However, qemuDomainGetBlockInfo does not
know whether it will have to start a job or not before checking vm->def.
To avoid using disk alias that might have been freed while we were
waiting for a job, we use its copy. In case the disk was removed in the
meantime, we will fail with "cannot find statistics for device '...'"
error message.

(cherry picked from commit b7992595)

Conflicts:
	src/qemu/qemu_driver.c - VIR_STRDUP not backported

CVE-2013-6458
https://bugzilla.redhat.com/show_bug.cgi?id=1043069

When virDomainDetachDeviceFlags is called concurrently to
virDomainBlockStats: libvirtd may crash because qemuDomainBlockStats
finds a disk in vm->def before getting a job on a domain and uses the
disk pointer after getting the job. However, the domain in unlocked
while waiting on a job condition and thus data behind the disk pointer
may disappear. This happens when thread 1 runs
virDomainDetachDeviceFlags and enters monitor to actually remove the
disk. Then another thread starts running virDomainBlockStats, finds the
disk in vm->def, and while it's waiting on the job condition (owned by
the first thread), the first thread finishes the disk removal. When the
second thread gets the job, the memory pointed to be the disk pointer is
already gone.

That said, every API that is going to begin a job should do that before
fetching data from vm->def.

(cherry picked from commit db86da5c)

Conflicts:
	src/qemu/qemu_driver.c - context: no ACLs

While working on v1.0.5-maint (the branch in use on Fedora 19)
with the host at Fedora 20, I got a failure in virstoragetest.
I traced it to the fact that we were using qemu-img to create a
qcow2 file, but qemu-img changed from creating v2 files by
default in F19 to creating v3 files in F20.  Rather than leaving
it up to qemu-img, it is better to write the test to force
testing of BOTH file formats (better code coverage and all).

This patch alone does not fix all the failures in v1.0.5-maint;
for that, we must decide to either teach the older branch to
understand v3 files, or to reject them outright as unsupported.
But for upstream, making the test less dependent on changing
qemu-img defaults is always a good thing.

* tests/virstoragetest.c (testPrepImages): Simplify creation of
raw file; check if qemu supports compat and if so use it.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 974e5914)

Conflicts:
	tests/virstoragetest.c - hardcode test to v2, since this branch doesn't handle v3 correctly

Newer pod (hello rawhide) complains if you attempt to mix bullets
and non-bullets in the same list:

virsh.pod around line 3177: Expected text after =item, not a bullet

As our intent was to nest an inner list, we make that explicit to
keep pod happy.

* tools/virsh.pod (ENVIRONMENT): Use correct pod syntax.

(cherry picked from commit 00d69b4a)

Xen 4.3 fixes a mistake in the libxl event handler signature where the
event owned by the application was defined as const.  Detect this and
define the libvirt libxl event handler signature appropriately.
(cherry picked from commit 43b0ff5b)

Introduced by 7b87a3
When I quit the process which only register VIR_DOMAIN_EVENT_ID_REBOOT,
I got error like:
"libvirt: XML-RPC error : internal error: domain event 0 not registered".
Then I add the following code, it fixed.
Signed-off-by: NZhou Yimin <zhouyimin@huawei.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 9712c251)

Introduced by commit 1daa4ba3. vshCommandOptStringReq returns
0 on *success* or the option is not required && not present, both
are right result. Error out when returning 0 is not correct.
the caller, it doesn't have to check wether it
(cherry picked from commit 2a3a725c)

The 'stats' variable was not initialized to NULL, so if some
early validation of the RPC call fails, it is possible to jump
to the 'cleanup' label and VIR_FREE an uninitialized pointer.
This is a security flaw, since the API can be called from a
readonly connection which can trigger the validation checks.

This was introduced in release v0.9.1 onwards by

  commit 158ba873
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Wed Apr 13 16:21:35 2011 +0100

    Merge all returns paths from dispatcher into single path
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit e7f400a1)

Conflicts:
	daemon/remote.c - context

With the existing pkcheck (pid, start time) tuple for identifying
the process, there is a race condition, where a process can make
a libvirt RPC call and in another thread exec a setuid application,
causing it to change to effective UID 0. This in turn causes polkit
to do its permission check based on the wrong UID.

To address this, libvirt must get the UID the caller had at time
of connect() (from SO_PEERCRED) and pass a (pid, start time, uid)
triple to the pkcheck program.
Signed-off-by: NColin Walters <walters@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 922b7fda)

Conflicts:
	src/access/viraccessdriverpolkit.c

Resolution:
  Dropped file that does not exist in this branch.

Since PIDs can be reused, polkit prefers to be given
a (PID,start time) pair. If given a PID on its own,
it will attempt to lookup the start time in /proc/pid/stat,
though this is subject to races.

It is safer if the client app resolves the PID start
time itself, because as long as the app has the client
socket open, the client PID won't be reused.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 979e9c56)

Conflicts:
	src/util/virprocess.c
	src/util/virstring.c
	src/util/virstring.h

The virBitmapParse function was calling virBitmapIsSet() function that
requires the caller to check the bounds of the bitmap without checking
them. This resulted into crashes when parsing a bitmap string that was
exceeding the bounds used as argument.

This patch refactors the function to use virBitmapSetBit without
checking if the bit is set (this function does the checks internally)
and then counts the bits in the bitmap afterwards (instead of keeping
track while parsing the string).

This patch also changes the "parse_error" label to a more common
"error".

The refactor should also get rid of the need to call sa_assert on the
returned variable as the callpath should allow coverity to infer the
possible return values.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997367

Thanks to Alex Jia for tracking down the issue. This issue is introduced
by commit 0fc89098.

(cherry picked from commit 47b9127e)

Don't reuse the return value of virStorageBackendFileSystemIsMounted.
If it's 0, we'd return it even if the mount command failed.

Also, don't report another error if it's -1, since one has already
been reported.

Introduced by 258e06c8.

https://bugzilla.redhat.com/show_bug.cgi?id=981251
(cherry picked from commit 13fde7ce)

If qemuMonitorBlockJob returned 0, qemuDomainBlockPivot
might return 0 even if an error occured.

https://bugzilla.redhat.com/show_bug.cgi?id=977678
(cherry picked from commit c34107df)

When creating a virtual FC HBA with virsh/libvirt API, an error message
will be returned: "error: Node device not found",
also the 'nodedev-dumpxml' shows wrong information of wwpn & wwnn
for the new created device.

Signed-off-by: xschen@tnsoft.com.cn

This reverts f90af691 which switched wwpn & wwwn in the wrong place.

https://www.kernel.org/doc/Documentation/scsi/scsi_fc_transport.txt
(cherry picked from commit 3c0d5e22)

Conflicts:
	src/storage/storage_backend_scsi.c

If networkUnplugBandwidth is called on a network which has
no bandwidth defined, print a warning instead of crashing.

This can happen when destroying a domain with bandwidth if
bandwidth was removed from the network after the domain was
started.

https://bugzilla.redhat.com/show_bug.cgi?id=975359
(cherry picked from commit 658c932a)

Don't check for '\n' at the end of file if zero bytes were read.

Found by valgrind:
==404== Invalid read of size 1
==404==    at 0x529B09F: virCgroupGetValueStr (vircgroup.c:540)
==404==    by 0x529AF64: virCgroupMoveTask (vircgroup.c:1079)
==404==    by 0x1EB475: qemuSetupCgroupForEmulator (qemu_cgroup.c:1061)
==404==    by 0x1D9489: qemuProcessStart (qemu_process.c:3801)
==404==    by 0x18557E: qemuDomainObjStart (qemu_driver.c:5787)
==404==    by 0x190FA4: qemuDomainCreateWithFlags (qemu_driver.c:5839)

Introduced by 0d0b4098.

https://bugzilla.redhat.com/show_bug.cgi?id=978356
(cherry picked from commit 306c49ff)

Free the old XML strings before overwriting them if the user
has chosen to reedit the file or force the redefinition.

Found by Alex Jia trying to reproduce another bug:
https://bugzilla.redhat.com/show_bug.cgi?id=977430#c3
(cherry picked from commit 1e3a2529)

Cherry-picked from 38ada092

As a consequence of the cgroup layout changes from commit 'cfed9ad4', the
lxcDomainGetSchedulerParameters[Flags]()' and lxcGetSchedulerType() APIs
failed to return data for a non running domain.  This can be seen through
a 'virsh schedinfo <domain>' command which returns:

Scheduler      : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted

Prior to that change a non running domain would return:

Scheduler      : posix
cpu_shares     : 0
vcpu_period    : 0
vcpu_quota     : 0
emulator_period: 0
emulator_quota : 0

This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.

Conflicts:
	src/lxc/lxc_driver.c

  * Resolved conflict by using former lxcCgroupHasController() rather than
    virCgroupHasController()
  * Needed to add the code to fetch the 'vm'
     vm = virDomainObjListFindByUUID(driver->domains, domain->uuid);
     if (vm == NULL) {
         virReportError(VIR_ERR_INTERNAL_ERROR,
                        _("No such domain %s"), domain->uuid);
         goto cleanup;
     }
  * Used 'ret = strdup("posix");' rather than VIR_STRDUP(ret, "posix");
    and added the virReportOOMError(); on failure.

Cherry-picked from b2375453

As a consequence of the cgroup layout changes from commit '632f78ca', the
qemuDomainGetSchedulerParameters[Flags]()' and qemuGetSchedulerType() APIs
failed to return data for a non running domain.  This can be seen through
a 'virsh schedinfo <domain>' command which returns:

Scheduler      : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted

Prior to that change a non running domain would return:

Scheduler      : posix
cpu_shares     : 0
vcpu_period    : 0
vcpu_quota     : 0
emulator_period: 0
emulator_quota : 0

This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.

Conflicts:
	src/qemu/qemu_driver.c

 * Resolved conflict by using former qemuCgroupHasController() rather than
   virCgroupHasController()
 * Needed to add the code to fetch the 'vm'
      vm = virDomainObjListFindByUUID(driver->domains, dom->uuid);
      if (vm == NULL) {
          virReportError(VIR_ERR_INTERNAL_ERROR,
                         _("No such domain %s"), dom->uuid);
          goto cleanup;
      }
* Used 'ret = strdup("posix");' rather than VIR_STRDUP(ret, "posix");
  and added the virReportOOMError(); on failure.

Don't free the stream on error if we've successfully added it
to the hash table, since it will be freed by virChrdevHashEntryFree
callback.

Preserve the error message before calling virStreamFree, since it
resets the error.

Introduced by 47161382, crashing since 69218922.

Reported by Sergey Fionov on libvir-list.
(cherry picked from commit a32b4174)

Change the socket path to match the one used by lockd driver.

https://bugzilla.redhat.com/show_bug.cgi?id=968128
(cherry picked from commit 70fe1295)

Use the host number as the host number when constructing the sysfs path
instead of the variable we are trying to fill.

https://bugzilla.redhat.com/show_bug.cgi?id=973543
(cherry picked from commit 371c1551)

This should resolve:

  https://bugzilla.redhat.com/show_bug.cgi?id=959191

The problem was that qemuUpdateActivePciHostdevs was returning 0
(success) when no hostdevs were present, but would otherwise return -1
(failure) even when it completed successfully. It is only called from
qemuProcessReconnect(), and when qemuProcessReconnect got back an
error, it would not only stop reconnecting, but would terminate the
guest qemu process "to remove danger of it ending up running twice if
user tries to start it again later".

(This bug was introduced in commit 011cf7ad, which was pushed between
v1.0.2 and v1.0.3, so all maintenance branches from v1.0.3 up to 1.0.5
will need this one line patch applied.)
(cherry picked from commit 2ea45647)

CVE-2013-1962

remoteDispatchStoragePoolListAllVolumes wasn't freeing the pool.
The pool also held a reference to the connection, preventing it from
getting freed and closing the netcf interface driver, which held two
sockets open.
(cherry picked from commit ca697e90)

The controller element supports non-disk controller types too.

https://bugzilla.redhat.com/show_bug.cgi?id=960958
(cherry picked from commit c075f89f)

(cherry picked from commit 413274f6)

Set spice password even if default VNC password hasn't been set.

https://bugzilla.redhat.com/show_bug.cgi?id=953720
(cherry picked from commit 4327df7e)

If the path part of connection URI is not present, cfg is used
unitialized.

https://bugzilla.redhat.com/show_bug.cgi?id=950855
(cherry picked from commit 74bff250)

Upstream gnulib determined that we were needlessly compiling in
gnulib's regex instead of glibc's when targetting new-enough glibc,
because the m4 test was being too strict in requiring a particular
answer to undefined behavior.
https://lists.gnu.org/archive/html/bug-gnulib/2013-04/msg00032.html

* .gnulib: Update to latest, for regex.
(cherry picked from commit 84243239)

Cherry picked because I hit a failure of test-regex when swapping
between incremental builds of libvirt.git master then v1.0.4-maint.

While this update doesn't address any reported problems in libvirt,
doing a post-release update to latest gnulib makes it easier to
stay in sync with best upstream practices.

* .gnulib: Update to latest.
* bootstrap: Resynchronize.
(cherry picked from commit d7468b7d)

https://bugzilla.redhat.com/show_bug.cgi?id=922186

Commit d04916fa introduced a regression in audit quality - even
though the code was computing the proper escaped name for a
path, it wasn't feeding that escaped name on to the audit message.
As a result, /var/log/audit/audit.log would mention a pair of
fields class=path path=/dev/hpet instead of the intended
class=path path="/dev/hpet", which in turn caused ausearch to
format the audit log with path=(null).

* src/conf/domain_audit.c (virDomainAuditCgroupPath): Use
constructed encoding.
Signed-off-by: NEric Blake <eblake@redhat.com>
(cherry picked from commit 31c6bf35)

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=949483Signed-off-by: NAlex Jia <ajia@redhat.com>
(cherry picked from commit c3e33e68)

Since commit b8a32e0e, all man pages
depend on configure.ac so that they are properly regenerated whenever
libvirt version changes. Thus libvirt.spec needs to have a build
dependency on pod2man when %{enable_autotools} is set.
(cherry picked from commit 6f1b9c8d)

By default, libtool builds two .o files for every .lo rule:
src/foo.o - static builds
src/.libs/foo.o - shared library builds

But since commit ad42b34b disabled static builds, src/foo.o is
no longer built by default.  On a fresh checkout, this means our
protocol check rules using pdwtags were testing a missing file,
and thanks to a lousy behavior of pdwtags happily giving no output
and 0 exit status (http://bugzilla.redhat.com/949034), we were
merely claiming that "dwarves is too old" and skipping the test.

However, if you swap between branches and do incremental builds,
such as building v0.10.2-maint and then switching back to master,
you end up with src/foo.o being leftover from its 0.10.2 state,
and then 'make check' fails because the .o file does not match
the protocol-structs file due to API additions in the meantime.

A simpler fix would be to always look in .libs for the .o to
be parsed; but since it is possible to pass ./configure options
to tell libtool to do a static-only build with no shared .o,
I went with the approach of finding the newest of the two files,
whenever both exist.

* src/Makefile.am (PDWTAGS): Ensure we test just-built file.
(cherry picked from commit 5899e09e)

The linker will ignore LD_PRELOAD libraries which do not
exist, just printing a warning message. This is not helpful
for the test suite which will be utterly fubar without the
preload library present. Add an explicit test for existence
of the library to protect against this
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit b1d3154a)

The last Viktor's effort to fix the race and memory corruption unfortunately
wasn't complete in the case the close callback was not registered in an
connection. At that time, the trail of event's that I'll describe later could
still happen and corrupt the memory or cause a crash of the client (including
the daemon in case of a p2p migration).

Consider the following prerequisities and trail of events:
Let's have a remote connection to a hypervisor that doesn't have a close
callback registered and the client is using the event loop. The crash happens in
cooperation of 2 threads. Thread E is the event loop and thread W is the worker
that does some stuff. R denotes the remote client.

1.) W - The client finishes everything and sheds the last reference on the client
2.) W - The virObject stuff invokes virConnectDispose that invokes doRemoteClose
3.) W - the remote close method invokes the REMOTE_PROC_CLOSE RPC method.
4.) W - The thread is preempted at this point.
5.) R - The remote side receives the close and closes the socket.
6.) E - poll() wakes up due to the closed socket and invokes the close callback
7.) E - The event loop is preempted right before remoteClientCloseFunc is called
8.) W - The worker now finishes, and frees the conn object.
9.) E - The remoteClientCloseFunc accesses the now-freed conn object in the
        attempt to retrieve pointer for the real close callback.
10.) Kaboom, corrupted memory/segfault.

This patch tries to fix this by introducing a new object that survives the
freeing of the connection object. We can't increase the reference count on the
connection object itself or the connection would never be closed, as the
connection is closed only when the reference count reaches zero.

The new object - virConnectCloseCallbackData - is a lockable object that keeps
the pointers to the real user registered callback and ensures that the
connection callback is either not called if the connection was already freed or
that the connection isn't freed while this is being called.
(cherry picked from commit 8ad126e6)

This patch improves the error message after disconnecting from the
hypervisor and adds the close callback operations required not to leak
the callback reference.
(cherry picked from commit 69ab0756)