In my previous patch (37d8c75f) I've tried to fix permissions
for nvram store path. The aim was to give the nvram directory
execute permission so that domain running under other users
than qemu:qemu can access their nvram file. However, my fix
was incomplete as the path belongs to libvirt-driver-qemu
package too and I've fixed it only for the libvirt-daemon
package.
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The libxl driver was blindly assigning libvirt's
virDomainLifecycleAction to libxl's libxl_action_on_shutdown, when
in fact the various actions take on different values in these enums.

Introduce helpers to properly map the enum values.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Rename the VIR_MOCK_IMPL* macros to VIR_MOCK_WRAP*
and add new VIR_MOCK_IMPL macros which let you directly
implement overrides in the preloaded source.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Test suites using the port allocator don't want to have different
behaviour depending on whether a port is in use on the host. Add
a VIR_PORT_ALLOCATOR_SKIP_BIND_CHECK which test suites can use
to skip the bind() test. The port allocator will thus only track
ports in use by the test suite process itself. This is fine when
using the port allocator to generate guest configs which won't
actually be launched
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

I've noticed two problem with the automatically created NVRAM varstore
file. The first, even though I run qemu as root:root for some reason I
get Permission denied when trying to open the _VARS.fd file. The
problem is, the upper directory misses execute permissions, which in
combination with us dropping some capabilities result in EPERM.

The next thing is, that if I switch SELinux to enforcing mode, I get
another EPERM because the vars file is not labeled correctly. It is
passed to qemu as disk and hence should be labelled as disk. QEMU may
write to it eventually, so this is different to kernel or initrd.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The build failed because of missing "sys/syscall.h".
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

With all the changes in my previous foray into this code, I forgot to
remove the libxlDomainEventQueue(driver, event); call inside the
dom == NULL condition.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Coverity notes that if the virConnectListAllDomains returns a negative
value then the loop at the cleanup label that ends on numDomains will
have issues.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Coverity notes that if qemuMonitorGetMachines() returns a negative
nmachines value, then the code at the cleanup label will have issues.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Coverity notes that if the call to virBitmapParse() returns a negative
value, then when we jump to the error label, the call to
virCapabilitiesClearHostNUMACellCPUTopology() will have issues
with the negative nb_cpus
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If the virNumaGetNodeCPUs() call fails with -1, then jumping to cleanup
with 'cpus == NULL' and calling virCapabilitiesClearHostNUMACellCPUTopology
will cause issues.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

In qemuProcessInitPCIAddresses() if qemuMonitorGetAllPCIAddresses()
returns a negative (or zero) value, then no need to call the
qemuProcessDetectPCIAddresses().
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The code compares def->forwarders when deciding to return 0 at a
couple of points, then uses "def->nfwds" as a way to index into
the def->forwarders array.  That reference results in Coverity
complaining that def->forwarders being NULL was checked as part
of an arithmetic OR operation where failure could be any one 5
conditions, but that is not checked when entering the loop to
dereference the array.  Changing the comparisons to use nfwds
will clear the warnings
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If the qemuMigrationEatCookie() fails to set mig, we jump to cleanup:
which will call qemuMigrationCancelDriveMirror() without first checking
if mig == NULL
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Perhaps a false positive, but since Coverity doesn't understand the
relationship between the 'count' and the 'strings', rather than leave
the chance the on input 'strings' is NULL and causes a deref - just
check for it and return
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If the VIR_STRDUP(exptime,...) fails, then we will jump to cleanup,
no need to check if exptime is set which causes Coverity to issue
a complaint in the virStrToLong_ll call because there wasn't a check
for a NULL value while there was one for the reference right after
the VIR_STRDUP().
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If we jump to cleanup before allocating the 'result', then the call
to virBlkioDeviceArrayClear will deref result causing a problem.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If we jump to cleanup before allocating 'result', then the call to
virBlkioDeviceArrayClear() could dereference result
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If the virJSONValueNewObject() fails, then rather than going to error
and getting a Coverity false positive since it doesn't seem to understand
the relationship between nkeywords, keywords, and values and seems to
believe calling qemuFreeKeywords will cause a NULL deref - just return NULL
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Coverity points out that if 'dom' isn't returned from virDomainQemuAttach,
then the code already jumps to cleanup, so there was no need for the
subsequent if (dom != NULL) check.

I moved the error message about failure into the goto cleanup on failure
and then removed the if (dom != NULL)
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Coverity complains that the various checks for autoincrement and changed
variables are DEADCODE - seems to me to be a false positive - so mark it.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add another 'dead_code_begin' - victims of our own coding practices
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Coverity points out that by using EMPTYSTR(type) we are guarding against
the possibility that it could be NULL; however, based on how 'type' was
initialized to NULL, then using nested ternary if-then-else's (?:?:)
setting either "ipv4", "ipv6", or "" - there is no way it could be NULL.
Since "-" is supposed to mean something empty in a field - modify the
nested ternary to an easier to read/process if-then-else leaving the
initialization to NULL to mean "-" in the formatted output.

Also changed the name from 'type' to 'typestr'.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Adjust the parentheses in/for the waitpid loops; otherwise, Coverity
points out:

(1) Event assignment:   Assigning: "waitret" = "waitpid(pid, &status, 0) == -1"
(2) Event between:      At condition "waitret == -1", the value of "waitret"
                        must be between 0 and 1.
(3) Event dead_error_condition:     The condition "waitret == -1" cannot
                        be true.
(4) Event dead_error_begin:     Execution cannot reach this statement:
                        "ret = -*__errno_location();".
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Since 0766783a

Coverity complains that the EDIT_FREE definition results in DEADCODE.

As it turns out with the change to use the EDIT_FREE macro the call to
vir*Free() wouldn't be necessary nor would it happen...

Prior code to above commitid would :

  vir*Ptr foo = NULL;
  ...
  foo = vir*GetXMLDesc()
  ...
  vir*Free(foo);
  foo = vir*DefineXML()
  ...

And thus the free was needed.  With the change to use EDIT_FREE the
same code changed to:

  vir*Ptr foo = NULL;
  vir*Ptr foo_edited = NULL;
  ...
  foo = vir*GetXMLDesc()
  ...
  if (foo_edited)
      vir*Free(foo_edited);
  foo_edited = vir*DefineXML()
  ...

However, foo_edited could never be set in the code path - even with
all the goto's since the only way for it to be set is if vir*DefineXML()
succeeds in which case the code to allow a retry (and thus all the goto's)
never leaves foo_edited set

All error paths lead to "cleanup:" which causes both foo and foo_edited
to call the respective vir*Free() routines if set.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Coverity complains that when multiplying to 32 bit values that eventually
will be stored in a 64 bit value that it's possible the math could
overflow unless one of the values being multiplied is type cast to
the proper size.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Coverity complains that checking for !domlist after setting doms = domlist
and making a deref of doms just above

It seems the call in question was intended to me made in the case that
'doms' was passed in and not when the virDomainObjListExport() call
allocated domlist and already called virConnectGetAllDomainStatsCheckACL().

Thus rather than check for !domlist - check that "doms != domlist" in
order to avoid the Coverity message.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Handle a few places where Coverity complains about the value being
unused. For two of them (Close cases) - the comments above the close
indicate there is no harm to ignore the error - so added an ignore_value.
For the other condition, added an rc check like other callers.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Since cd4d5475

Coverity notes that setting 'ret = -3' prior to the unconditional
setting of 'ret = 0' will cause the value to be UNUSED.

Since the comment indicates that it is expect to allow the code
to continue, just remove the ret = -3 setting.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

In qemuDomainSetBlkioParameters(), Coverity points out that the calls
to qemuDomainParseBlkioDeviceStr() are slightly different and points
out there may be a cut-n-paste error.

In the first call (AFFECT_LIVE), the second parameter is "param->field";
however, for the second call (AFFECT_CONFIG), the second parameter is
"params->field".  It seems the "param->field" is correct especially since
each path as a setting of "param" to "&params[i]".  Furthermore, there
were a few more instances of using "params[i]" instead of "param->"
which I cleaned up.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

After a4431931 the TAP FDs ale labeled with image label instead
of the process label. On the other hand, the commit was
incomplete as a few lines above, there's still old check for the
process label presence while it should be check for the image
label instead.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

As of commit 5d29ca06:
qemu: switch PCI address set from hash table to an array

There is no error to be reset.

Tweak the messages so that they mention "title" rather than
"description" when operating in title mode. Also fixes one missing "%s"
before non-formatted gettext message.

Before:
 $ virsh desc --title dom
 No description for domain: dom

After:
 $ virsh desc --title dom
 No title for domain: dom

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140034

To allow the compiler to track future additions of disk types, convert
the function to use a switch statement with the correct type.

From time to time weird bugreports occur on the list, e.g [1].
Even though the kernel supports setns syscall, there's an older
glibc in the system that misses a wrapper over the syscall.
Hence, after the configure phase we think there's no setns
support in the system, which is obviously wrong. On the other
hand, we can't rely on linux distributions to provide newer glibc
soon. Therefore we need to introduce the wrapper on or own.

1: https://www.redhat.com/archives/libvir-list/2014-September/msg00492.htmlSigned-off-by: NStephan Sachse <ste.sachse@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Check if the VM is alive after we possibly called into monitor to reset
the guest.

Also drop a comment with obvious content.

virProcessTranslateStatus is used on error paths that should not spoil
the returned error. As the errors are ignored, use the quiet versions of
virAsprintf to create the message.

When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.

Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>