- 16 4月, 2018 7 次提交
-
-
由 Ján Tomko 提交于
Implied by QEMU >= 1.2.0. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Implied by QEMU >= 1.2.0. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Implied by QEMU >= 1.2.0. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Implied by QEMU >= 1.2.0. Signed-off-by: NJán Tomko <jtomko@redhat.com> Fixed-up-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Implied by QEMU >= 1.2.0. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Implied by QEMU >= 1.2.0. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Implied by QEMU >= 1.2.0. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
- 12 4月, 2018 6 次提交
-
-
由 Ján Tomko 提交于
Implied by QEMU >= 1.2.0. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Implied by QEMU >= 1.2.0. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
This makes qemuDomainSupportsNetdev identical to qemuDomainSupportsNicdev and leaves some code in qemuDomainAttachNetDevice to be cleaned up later. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Supported since QEMU 0.13, but we require QEMU 1.5.0. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
- 10 4月, 2018 1 次提交
-
-
由 Ján Tomko 提交于
According to the policy described on https://libvirt.org/platforms.html the QEMU versions in the oldest relevant releses are: SLES 12: 2.0.0 RHEL 7: 1.5.3 Ubuntu 14.04: 2.0.0 Set the minimum to 1.5.0 and drop support for RHEL 6. This will let us assume lots of capabilities. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
- 06 4月, 2018 1 次提交
-
-
由 Andrea Bolognani 提交于
This capability will be set when the pcie-pci-bridge device is available in the QEMU binary. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 03 4月, 2018 1 次提交
-
-
由 Peter Krempa 提交于
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
- 24 3月, 2018 3 次提交
-
-
由 Andrea Bolognani 提交于
When GIC support was introduced (QEMU 2.6 timeframe) we needed to make sure both GICv2 hardware and GICv3 hardware were handled correctly, and that was achieved by having separate capabilities data for each. Now that we have capabilities data for several QEMU versions we can stop storing data for GICv2 and GICv3 hardware separately, and instead have GICv2 data for QEMU <= 2.10 and GICv3 data for QEMU >= 2.12, without losing any coverage. Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Farhan Ali 提交于
QEMU on S390 (since v2.11) can support virtio input ccw devices. Introduce qemu capabilities for these devices. Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com> Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
由 Farhan Ali 提交于
QEMU on S390 (since v2.11) can support virtio-gpu-ccw device. Let's introduce a new qemu capability for the device. Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com> Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
- 22 3月, 2018 1 次提交
-
-
由 Andrea Bolognani 提交于
The QEMU binary is compiled from the v2.12.0-rc0 tag. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 08 3月, 2018 1 次提交
-
-
由 Andrea Bolognani 提交于
Commit 4ae59411 introduced the ability to make probing for device properties conditional on a capability being set, but didn't extend the use of this feature to existing devices. This commit does the last bit of work, which results in a lot of pointless QMP chatter no longer happening and our test suite shrinking a fair bit. Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
- 06 3月, 2018 1 次提交
-
-
Let us introduce the xml and reply files for QEMU 2.11.0 on s390x. Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com> Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
- 03 2月, 2018 1 次提交
-
-
由 John Ferlan 提交于
Add the DUMP_COMPLETED check to the capabilities. This is the mechanism used to determine whether the dump-guest-memory command can support the "-detach" option and thus be able to wait on the event and allow for a query of the progress of the dump. Reviewed-by: NJiri Denemark <jdenemar@redhat.com>
-
- 06 1月, 2018 1 次提交
-
-
由 Shivaprasad G Bhat 提交于
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
- 04 1月, 2018 1 次提交
-
-
由 Paolo Bonzini 提交于
A microcode update can cause the CPUID bits to change; an example from the past was the update that disabled TSX on several Haswell and Broadwell machines. Therefore, place microcode version in the virQEMUCaps struct and XML, and rebuild the cache if the versions do not match. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 28 11月, 2017 2 次提交
-
-
由 Andrea Bolognani 提交于
All serial devices shoule have an associated capability. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Andrea Bolognani 提交于
All serial devices shoule have an associated capability. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
- 25 11月, 2017 1 次提交
-
-
由 John Ferlan 提交于
Detect the capability via the query-qmp-schema for blockdev-add to find the 'password-secret' parameter that will allow the iSCSI code to use the master secret object to encrypt the secret for an and only need to provide the object id of the secret on the command line thus obsfuscating the passphrase.
-
- 24 11月, 2017 1 次提交
-
-
由 Peter Krempa 提交于
'share-rw' for the disk device configures qemu to allow concurrent access to the backing storage. The capability is checked in various supported disk frontend buses since it does not make sense to partially backport it.
-
- 23 11月, 2017 1 次提交
-
-
由 Michal Privoznik 提交于
This capability says if qemu is capable of specifying distances between NUMA nodes on the command line. Unfortunately, there's no real way to check this and thus we have to go with version check. QEMU introduced this in 0f203430dd8 (and friend) which was released in 2.10.0. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 20 11月, 2017 2 次提交
-
-
由 Pino Toscano 提交于
Add a separate capability for the sclplmconsole device, and check it specifically instead of using QEMU_CAPS_DEVICE_SCLPCONSOLE for that too. Signed-off-by: NPino Toscano <ptoscano@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Andrea Bolognani 提交于
Up until now we assumed the spapr-vty device would always be present, which is not very nice. Check for its availability before using it instead. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
- 14 11月, 2017 1 次提交
-
-
由 Andrea Bolognani 提交于
Most of the time it's okay to leave this up to negotiation between the guest and the host, but in some situations it can be useful to manually decide the behavior, especially to enforce its availability. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 08 11月, 2017 4 次提交
-
-
由 Andrea Bolognani 提交于
Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Andrea Bolognani 提交于
The architecture itself is called ppc64, and it can run both in big endian and little endian mode - the latter is known as ppc64le. From the (virtual) hardware point of view, ppc64 is a more accurate name so it should be used here. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Andrea Bolognani 提交于
Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Andrea Bolognani 提交于
Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 16 10月, 2017 1 次提交
-
-
由 Jiri Denemark 提交于
query-cpu-definitions QMP command returns a list of unavailable features which prevent CPU models from being usable on the current host. So far we only checked whether the list was empty to mark CPU models as (un)usable. This patch parses all unavailable features for each CPU model and stores them in virDomainCapsCPUModel as a list of usability blockers. Signed-off-by: NJiri Denemark <jdenemar@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 04 10月, 2017 1 次提交
-
-
由 Lin Ma 提交于
Signed-off-by: NLin Ma <lma@suse.com>
-
- 22 9月, 2017 1 次提交
-
-
由 Boris Fiuczynski 提交于
Adding s390x qemu caps test for qemu version 2.10.0. Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-