- 25 6月, 2015 1 次提交
-
-
由 Dmitry Guryanov 提交于
Remove braces around single-statement blocks in vz_sdk.c
-
- 24 6月, 2015 12 次提交
-
-
由 Mikhail Feoktistov 提交于
In this patch we add VIR_DOMAIN_DEVICE_NET handlers implementation for domainAttachDevice and domainDetachDevice callbacks. As soon as we don't support this operation for hypervisor type domains, we implement this functionality for containers only. In detach procedure we find network device by MAC address. Because PrlVmDevNet_GetMacAddress() returns MAC as a UTF-8 encoded null-terminated string, we use memcmp() to compare it. Also we remove corresponding virtual network by prlsdkDelNetAdapter call.
-
由 Boris Fiuczynski 提交于
Adding a test for the new watchdog model diag288. Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
由 Boris Fiuczynski 提交于
This patch provides support for the new watchdog model "diag288". Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com> Reviewed-by: NDaniel Hansel <daniel.hansel@linux.vnet.ibm.com> Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com> Reviewed-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com>
-
由 Boris Fiuczynski 提交于
Adding a test for the new watchdog action "inject-nmi". Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
由 Boris Fiuczynski 提交于
This patch provides support for a new watchdog action "inject-nmi" which allows to define an inject of a non-maskable interrupt into a guest. Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com> Reviewed-by: NDaniel Hansel <daniel.hansel@linux.vnet.ibm.com> Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com> Reviewed-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com>
-
由 John Ferlan 提交于
Related to : https://bugzilla.redhat.com/show_bug.cgi?id=1171933 Rather than ignore the return status from virStorageBackendSCSIFindLUs, cause a failure to start the pool if a -1 is returned. Issue was noted during testing of the bz for iscsi that 'scsi' and 'fc' pools don't fail.
-
由 Michal Privoznik 提交于
There are two macros used in the test: CAPSCOMP and CAPS_EXPECT_ERR. Both run a test case and if a failure occurred, they set the @ret variable to a value of -1 to indicate an error. Well, that's what they should do. Due to a typo, they set the variable to a positive one effectively masking any failed test. Then, we have couple of tests failing. Fix them too. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 John Ferlan 提交于
Commit id '1feaccf0' attempted to handle an empty secrettype value; however, it made a mistake by processing the secretType as if it was the original secrettype string. The 'secretType' is actually whether 'usage' or 'uuid' was used. Thus adjust part of the change to make the same check for def->src->type != VIR_STORAGE_TYPE_VOLUME before setting auth_secret_usage from the secrettype field. Luckily the aforementioned commits misdeed would be overwritten by the call to virStorageTranslateDiskSourcePool
-
由 Luyao Huang 提交于
Just refactor existing code to use a child buf instead of check all element before format <blkiotune> and <cputune>. This will avoid the more and more bigger element check during we introduce new elements in <blkiotune> and <cputune> in the future. Signed-off-by: NLuyao Huang <lhuang@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Luyao Huang 提交于
Functions like virDomainOpenConsole() and virDomainOpenChannel() accept NULL as a dev_name parameter. Try using alias for the error message if dev_name is not specified. Before: error: internal error: character device <null> is not using a PTY After: error: internal error: character device serial0 is not using a PTY Signed-off-by: NLuyao Huang <lhuang@redhat.com>
-
由 Peter Krempa 提交于
We require the scheduler name attribute in the schemas but the code would actually be fine when it was omitted. Make it mandatory. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1234729
-
- 23 6月, 2015 12 次提交
-
-
由 Michal Privoznik 提交于
The acl.html file includes aclperms.htmlinc which is generated. However, acl.html is generated too from acl.html.tmp. And in fact, this is the place where the aclperms file is needed. Fix the dependency in Makefile. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 John Ferlan 提交于
Commit id '832a9256' adjusted the code to recognize when the default type of "unknown" was provided as the format type and to use "dos" if found. Since the pool is built with "dos" and it could cause some confusion when formatting the XML after building by seeing "unknown" in the output, let's just adjust the pool's setting to "dos" so that subsequent formats will see the value.
-
由 John Ferlan 提交于
Currently the grammar uses "none" for a "valid" Disk Storage Pool format type; however, virStoragePoolFormatDisk uses "unknown" so virt-xml-validate will fail to validate when "unknown" is found
-
由 Martin Kletzander 提交于
By trying to lead the way of clean includes, I sorted the lines alphabetically and that is a problem for mingw builds with gnulib. As 'configmake.h' defines DATADIR and 'datatypes.h' transitively includes 'winsock.h' that uses 'DATADIR' as a name for a struct, it's enough to reorder those. Even though this might be worked around in gnulib later on, this fixes the build for now. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Eric Farman 提交于
The type='scsi' parameter of an address element is ignored if placed within a hostdev section, and rejected by the XML schema used by virt-xml-validate. Remove it from the doc, and correct a typo in the remaining address arguments. Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com> Reviewed-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com> Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
由 Eric Farman 提交于
Defining a domain with a SCSI disk attached via a hostdev tag and a source address unit value longer than two digits causes an error when editing the domain with virsh edit, even if no changes are made to the domain definition. The error suggests invalid XML, somewhere: # virsh edit lmb_guest error: XML document failed to validate against schema: Unable to validate doc against /usr/local/share/libvirt/schemas/domain.rng Extra element devices in interleave Element domain failed to validate content The virt-xml-validate tool fails with a similar error: # virt-xml-validate lmb_guest.xml Relax-NG validity error : Extra element devices in interleave lmb_guest.xml:17: element devices: Relax-NG validity error : Element domain failed to validate content lmb_guest.xml fails to validate The hostdev tag requires a source address to be specified, which includes bus, target, and unit address attributes. According to the SCSI Architecture Model spec (section 4.9 of SAM-2), a LUN address is 64 bits and thus could be up to 20 decimal digits long. Unfortunately, the XML schema limits this string to just two digits. Similarly, the target field can be up to 32 bits in length, which would be 10 decimal digits. # lsscsi -xx [0:0:19:0x4022401100000000] disk IBM 2107900 3.44 /dev/sda # lsscsi [0:0:19:1074872354]disk IBM 2107900 3.44 /dev/sda # cat lmb_guest.xml <domain type='kvm'> <name>lmb_guest</name> <memory unit='MiB'>1024</memory> ...trimmed... <devices> <controller type='scsi' model='virtio-scsi' index='0'/> <hostdev mode='subsystem' type='scsi'> <source> <adapter name='scsi_host0'/> <address bus='0' target='19' unit='1074872354'/> </source> </hostdev> ...trimmed... Since the reference unit and target fields are used in several places in the XML schema, create a separate one specific for SCSI Logical Units that will permit the greater length. This permits both the validation utility and the virsh edit command to succeed when a hostdev tag is included. Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com> Reviewed-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com> Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
-
由 Eric Farman 提交于
The SCSI Architecture Model defines a logical unit address as 64-bits in length, so change the field accordingly so that the entire value could be stored. Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
-
由 Eric Farman 提交于
The address elements are all unsigned integers, so we should use the appropriate print directive when printing it. Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
-
由 Eric Farman 提交于
The SCSI address element attributes bus, target, and unit are expected to be positive values, so make sure no one provides a negative value since the value is stored as an unsigned. Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
-
由 Eric Blake 提交于
Rather than grabbing an arbitrary JSON value and then checking if it has the right type, we might as well request the correct type to begin with. * src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent) (qemuMonitorJSONCommandWithFd, qemuMonitorJSONHandleGraphics) (qemuMonitorJSONGetStatus, qemuMonitorJSONExtractCPUInfo) (qemuMonitorJSONGetVirtType, qemuMonitorJSONGetBalloonInfo) (qemuMonitorJSONGetMemoryStats) (qemuMonitorJSONDevGetBlockExtent) (qemuMonitorJSONGetOneBlockStatsInfo) (qemuMonitorJSONGetAllBlockStatsInfo) (qemuMonitorJSONBlockStatsUpdateCapacityOne) (qemuMonitorJSONBlockStatsUpdateCapacity) (qemuMonitorJSONGetBlockExtent) (qemuMonitorJSONGetMigrationStatusReply) (qemuMonitorJSONGetDumpGuestMemoryCapability) (qemuMonitorJSONAddFd, qemuMonitorJSONQueryRxFilterParse) (qemuMonitorJSONExtractChardevInfo) (qemuMonitorJSONDiskNameLookupOne) (qemuMonitorJSONDiskNameLookup) (qemuMonitorJSONGetAllBlockJobInfo) (qemuMonitorJSONBlockIoThrottleInfo, qemuMonitorJSONGetVersion) (qemuMonitorJSONGetMachines, qemuMonitorJSONGetCPUDefinitions) (qemuMonitorJSONGetCommands, qemuMonitorJSONGetEvents) (qemuMonitorJSONGetKVMState, qemuMonitorJSONGetObjectTypes) (qemuMonitorJSONGetObjectListPaths) (qemuMonitorJSONGetObjectProps, qemuMonitorJSONGetTargetArch) (qemuMonitorJSONGetMigrationCapabilities) (qemuMonitorJSONGetStringArray, qemuMonitorJSONAttachCharDev) (qemuMonitorJSONGetCPUx86Data, qemuMonitorJSONGetIOThreads) (qemuMonitorJSONGetMemoryDeviceInfo): Use shorter idioms. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
While working in qemu_monitor_json, I repeatedly found myself getting a value then checking if it was an object. Add some wrappers to make this task easier. * src/util/virjson.c (virJSONValueObjectGetByType) (virJSONValueObjectGetObject, virJSONValueObjectGetArray): New functions. (virJSONValueObjectGetString, virJSONValueObjectGetNumberInt) (virJSONValueObjectGetNumberUint) (virJSONValueObjectGetNumberLong) (virJSONValueObjectGetNumberUlong) (virJSONValueObjectGetNumberDouble) (virJSONValueObjectGetBoolean): Simplify. (virJSONValueIsNull): Change return type. * src/util/virjson.h: Reflect changes. * src/libvirt_private.syms (virjson.h): Export them. * tests/jsontest.c (testJSONLookup): New test. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
I was adding a JSON test, and was shocked to find out our parser treated the input string of "1" as invalid JSON. It turns out that YAJL specifically documents that it buffers input, and that if the last input read could be a prefix to a longer token, then you have to explicitly tell the parser that the buffer has ended before that token will be processed. It doesn't help that yajl 2 renamed the function from what it was in yajl 1. * src/util/virjson.c (virJSONValueFromString): Complete parse, in case buffer ends in possible token prefix. * tests/jsontest.c (mymain): Expose the problem. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 22 6月, 2015 6 次提交
-
-
由 Peter Krempa 提交于
Retrieve domain objects with reference and release them with virDomainObjEndAPI.
-
由 Peter Krempa 提交于
The test driver copies the domain definition correctly so we can reuse the helper.
-
由 Peter Krempa 提交于
When the block job would fail while watching it using the "--wait" option for blockcopy, virsh would rather unhelpfully report: $ virsh blockcopy vm hdc /tmp/raw.img --granularity 4096 --verbose --wait Now in mirroring phase Add a special case when the block job vanishes while waiting for it to finish to improve the message: $ virsh blockcopy vm hdc /tmp/raw.img --granularity 8192 --verbose --wait error: Block Copy unexpectedly failed
-
由 Michal Privoznik 提交于
There's a small formatting problem in the function. One line is not correctly indented. Fix this. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Peter Krempa 提交于
A single-line 'if' body should not be encased in curly braces. Our syntax-check enforces it. Introduced in 7f3515b4
-
由 Pavel Fedin 提交于
This capability specifies that "virt" machine on ARM has PCI controller. Enabled when version is at least 2.3.0. Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
-
- 20 6月, 2015 1 次提交
-
-
由 Ian Campbell 提交于
If vm->def->cputune.nvcpupin is 0 in libxlDomainSetVcpuAffinities (as seems to be the case on arm) then the VIR_FREE after cleanup: would be operating on an uninitialised pointer in map.map. Fix this by using libxl_bitmap_init and libxl_bitmap_dispose in the appropriate places (like VIR_FREE, libxl_bitmap_dispose is also idempotent, so there is no double free on exit from the loop). libxl_bitmap_dispose is slightly preferable since it also sets map.size back to 0, avoiding a potential source of confusion. This fixes the crashes we've been seeing in the Xen automated tests on ARM. I had a glance at the handful of other users of libxl_bitmap and none of them looked to have a similar issue. Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
-
- 19 6月, 2015 8 次提交
-
-
由 Vasiliy Tolstov 提交于
Nnever sheepdog versions have dog client binary while old have collie. Check them both. Signed-off-by: NVasiliy Tolstov <v.tolstov@selfip.ru>
-
由 Jiri Denemark 提交于
When a connection to the destination host during a p2p migration drops, we know we will have to cancel the migration; it doesn't make sense to waste resources by trying to finish the migration. We already do so after sending "migrate" command to QEMU and we should do it while waiting for drive mirrors to become ready too. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Checking status of all part of migration and aborting it when something failed is a complex thing which makes the waiting loop hard to read. This patch moves all the checks into a separate function similarly to what was done for drive mirror loops. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Instead of passing current job name to several functions which already know what the current job is we can generate the name where we actually need to use it. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Once we start waiting for migration events instead of polling query-migrate, priv->job.current will not be regularly updated anymore because we will get the current status directly from the events. Thus virDomainGetJob{Info,Stats} will have to query QEMU, but they can't just blindly update priv->job.current structure. This patch introduces qemuMigrationFetchJobStatus which just fills in a caller supplied structure and makes qemuMigrationUpdateJobStatus a tiny wrapper around it. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Move common parts of qemuDomainGetJobInfo and qemuDomainGetJobStats into a separate API (qemuDomainGetJobStatsInternal). Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
QEMU_CAPS_SEAMLESS_MIGRATION capability says QEMU supports SPICE_MIGRATE_COMPLETED event. Thus we can just drop all code which polls query-spice and replace it with waiting for the event. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-