docs: Fix XML schema handling of LUN address in hostdev tag

Defining a domain with a SCSI disk attached via a hostdev
tag and a source address unit value longer than two digits
causes an error when editing the domain with virsh edit,
even if no changes are made to the domain definition.
The error suggests invalid XML, somewhere:

  # virsh edit lmb_guest
  error: XML document failed to validate against schema:
  Unable to validate doc against /usr/local/share/libvirt/schemas/domain.rng
  Extra element devices in interleave
  Element domain failed to validate content

The virt-xml-validate tool fails with a similar error:

  # virt-xml-validate lmb_guest.xml
  Relax-NG validity error : Extra element devices in interleave
  lmb_guest.xml:17: element devices: Relax-NG validity error :
  Element domain failed to validate content
  lmb_guest.xml fails to validate

The hostdev tag requires a source address to be specified,
which includes bus, target, and unit address attributes.
According to the SCSI Architecture Model spec (section
4.9 of SAM-2), a LUN address is 64 bits and thus could be
up to 20 decimal digits long.  Unfortunately, the XML
schema limits this string to just two digits.  Similarly,
the target field can be up to 32 bits in length, which
would be 10 decimal digits.

  # lsscsi -xx
  [0:0:19:0x4022401100000000]  disk    IBM      2107900          3.44 /dev/sda
  # lsscsi
  [0:0:19:1074872354]disk    IBM      2107900          3.44  /dev/sda
  # cat lmb_guest.xml
  <domain type='kvm'>
    <name>lmb_guest</name>
    <memory unit='MiB'>1024</memory>
  ...trimmed...
    <devices>
      <controller type='scsi' model='virtio-scsi' index='0'/>
      <hostdev mode='subsystem' type='scsi'>
        <source>
          <adapter name='scsi_host0'/>
          <address bus='0' target='19' unit='1074872354'/>
        </source>
      </hostdev>
  ...trimmed...

Since the reference unit and target fields are used in
several places in the XML schema, create a separate one
specific for SCSI Logical Units that will permit the
greater length.  This permits both the validation utility
and the virsh edit command to succeed when a hostdev
tag is included.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

docs/formatdomain.html.in

@@ -3283,7 +3283,14 @@
           </dd>
           <dt>scsi</dt>
           <dd>SCSI devices are described by both the <code>adapter</code>
-            and <code>address</code> elements.
+            and <code>address</code> elements. The <code>address</code>
+            element includes a <code>bus</code> attribute (a 2-digit bus
+            number), a <code>target</code> attribute (a 10-digit target
+            number), and a <code>unit</code> attribute (a 20-digit unit
+            number on the bus). Not all hypervisors support larger
+            <code>target</code> and <code>unit</code> values. It is up
+            to each hypervisor to determine the maximum value supported
+            for the adapter.
             <p>
             <span class="since">Since 1.2.8</span>, the <code>source</code>
             element of a SCSI device may contain the <code>protocol</code>

docs/schemas/domaincommon.rng

@@ -3833,10 +3833,10 @@
       <ref name="driveBus"/>
     </attribute>
     <attribute name="target">
-      <ref name="driveTarget"/>
+      <ref name="driveSCSITarget"/>
     </attribute>
     <attribute name="unit">
-      <ref name="driveUnit"/>
+      <ref name="driveSCSIUnit"/>
     </attribute>
   </define>
   <define name="usbportaddress">
@@ -5152,11 +5152,21 @@
       <param name="pattern">[0-9]{1,2}</param>
     </data>
   </define>
+  <define name="driveSCSITarget">
+    <data type="string">
+      <param name="pattern">[0-9]{1,10}</param>
+    </data>
+  </define>
   <define name="driveUnit">
     <data type="string">
       <param name="pattern">[0-9]{1,2}</param>
     </data>
   </define>
+  <define name="driveSCSIUnit">
+    <data type="string">
+      <param name="pattern">[0-9]{1,20}</param>
+    </data>
+  </define>
   <define name="featureName">
     <data type="string">
       <param name='pattern'>[a-zA-Z0-9\-_\.]+</param>

tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-large-unit.xml

+<domain type='qemu'>
+  <name>QEMUGuest2</name>
+  <uuid>c7a5fdbd-edaf-9466-926a-d65c16db1809</uuid>
+  <memory unit='KiB'>219100</memory>
+  <currentMemory unit='KiB'>219100</currentMemory>
+  <vcpu placement='static'>1</vcpu>
+  <os>
+    <type arch='i686' machine='pc'>hvm</type>
+    <boot dev='hd'/>
+  </os>
+  <clock offset='utc'/>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>restart</on_reboot>
+  <on_crash>destroy</on_crash>
+  <devices>
+    <emulator>/usr/bin/qemu</emulator>
+    <disk type='block' device='disk'>
+      <source dev='/dev/HostVG/QEMUGuest2'/>
+      <target dev='hda' bus='ide'/>
+      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+    </disk>
+    <controller type='scsi' index='0' model='virtio-scsi'/>
+    <controller type='usb' index='0'/>
+    <controller type='ide' index='0'/>
+    <controller type='pci' index='0' model='pci-root'/>
+    <hostdev mode='subsystem' type='scsi' managed='yes'>
+      <source>
+        <adapter name='scsi_host0'/>
+        <address bus='0' target='0' unit='1074872354'/>
+      </source>
+      <address type='drive' controller='0' bus='0' target='4' unit='8'/>
+    </hostdev>
+    <memballoon model='virtio'/>
+  </devices>
+</domain>

tests/qemuxml2xmltest.c

@@ -577,6 +577,7 @@ mymain(void)
     DO_TEST("hostdev-scsi-rawio");
 
     DO_TEST_DIFFERENT("hostdev-scsi-autogen-address");
+    DO_TEST("hostdev-scsi-large-unit");
 
     DO_TEST("hostdev-scsi-lsi-iscsi");
     DO_TEST("hostdev-scsi-lsi-iscsi-auth");