The new blockcopy API wants to reuse only a subset of the disk
hotplug parser - namely, we only care about the embedded
virStorageSourcePtr inside a <disk> XML.  Strange as it may
seem, it was easier to just parse an entire disk definition,
then throw away everything but the embedded source, than it
was to disentangle the source parsing code from the rest of
the overall disk parsing function.  All that I needed was a
couple of tweaks and a new internal flag that determines
whether the normally-mandatory target element can be
gracefully skipped, since everything else was already optional.

* src/conf/domain_conf.h (virDomainDiskSourceParse): New
prototype.
* src/conf/domain_conf.c (VIR_DOMAIN_XML_INTERNAL_DISK_SOURCE):
New flag.
(virDomainDiskDefParseXML): Honor flag to make target optional.
(virDomainDiskSourceParse): New function.
Signed-off-by: NEric Blake <eblake@redhat.com>

Add a new disk "driver" attribute "iothread" to be parsed as the thread
number for the disk to use. In order to more easily facilitate the usage
and configuration of the iothread, a "zero" for the attribute indicates
iothreads are not supported for the device and a positive value indicates
the specific thread to try and use.

Introduce XML to allowing adding iothreads to the domain. These can be
used by virtio-blk-pci devices in order to assign a specific thread to
handle the workload for the device.  The iothreads are the official
implementation of the virtio-blk Data Plane that's been in tech preview
for QEMU.

Add helper to free a list of virDomainPtrs without raising or clearing
errors. Use it in one place and prepare it for reuse.

QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load.  Domain XML syntax is as follows:

<domain type='kvm>
  ...
  <features>
    ...
    <kvm>
      <hidden state='on'/>
    </kvm>
  </features>
  ...
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

All checks are based on the storage source, thus there's no need to pass
the complete disk def.

Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>

Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>

A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element.  This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>.  Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit).  It also prepares to update persistent XML
to match changes made to live XML when a copy completes.

* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.
Signed-off-by: NEric Blake <eblake@redhat.com>

Doing a blockcopy operation across a libvirtd restart is not very
robust at the moment.  In particular, we are clearing the <mirror>
element prior to telling qemu to finish the job.  Also, thanks to the
ability to request async completion, the user can easily regain
control prior to qemu actually finishing the effort, and they should
be able to poll the domain XML to see if the job is still going.

A future patch will fix things to actually wait until qemu is done
before modifying the XML to reflect the job completion.  But since
qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether
the job was cancelled (kept the original disk) or completed (pivoted
to the new disk), we have to track which of the two operations were
used to end the job.  Furthermore, we'd like to avoid attempts to
end a job where we are already waiting on an earlier request to qemu
to end the job.  Likewise, if we miss the qemu event (perhaps because
it arrived during a libvirtd restart), we still need enough state
recorded to be able to determine how to modify the domain XML once
we reconnect to qemu and manually learn whether the job still exists.

Although this patch doesn't actually fix the problem, it is a
preliminary step that makes it possible to track whether a job
has already begun steps towards completion.

* src/conf/domain_conf.h (virDomainDiskMirrorState): New enum.
(_virDomainDiskDef): Convert bool mirroring to new enum.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Handle new values.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust
client.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
* docs/schemas/domaincommon.rng (diskMirror): Expose new values.
* docs/formatdomain.html.in (elementsDisks): Document it.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>

  <memoryBacking>
    <hugepages>
      <page size="1" unit="G" nodeset="0-3,5"/>
      <page size="2" unit="M" nodeset="4"/>
    </hugepages>
  </memoryBacking>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

qemu supports adding multiple RNG devices. This patch allows libvirt to
support this.

Create the structures and API's to hold and manage the iSCSI host device.
This extends the 'scsi_host' definitions added in commit id '5c811dce'.
A future patch will add the XML parsing, but that code requires some
infrastructure to be in place first in order to handle the differences
between a 'scsi_host' and an 'iSCSI host' device.

Split virDomainHostdevSubsysSCSI further. In preparation for having
either SCSI or iSCSI data, create a union in virDomainHostdevSubsysSCSI
to contain just a virDomainHostdevSubsysSCSIHost to describe the
'scsi_host' host device

Create a separate typedef for the hostdev union data describing SCSI
Then adjust the code to use the new pointer

Create a separate typedef for the hostdev union data describing PCI.
Then adjust the code to use the new pointer

Create a separate typedef for the hostdev union data describing USB.
Then adjust the code to use the new pointer

This patch adds back the virDomainDef typedef into domain_conf and
makes all the numatune_conf functions independent of any virDomainDef
definitions.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1122205

Although the edits were changing in-memory XML, it was not flushed
to disk; so unless some other action changes XML, a libvirtd restart
would lose the changed information.

* src/conf/domain_conf.c (virDomainObjSetMetadata): Add parameter,
to save live status across restarts.
(virDomainSaveXML): Allow for test driver.
* src/conf/domain_conf.h (virDomainObjSetMetadata): Adjust
signature.
* src/bhyve/bhyve_driver.c (bhyveDomainSetMetadata): Adjust caller.
* src/lxc/lxc_driver.c (lxcDomainSetMetadata): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata): Likewise.
* src/test/test_driver.c (testDomainSetMetadata): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

For the values "default", "on", "off"

Replaces
virDeviceAddressPCIMulti
virDomainFeatureState
virDomainIoEventFd
virDomainVirtioEventIdx
virDomainDiskCopyOnRead
virDomainMemDump
virDomainPCIRombarMode
virDomainGraphicsSpicePlaybackCompression

Replace all three-state (default/yes/no) enums with it:
virDomainBIOSUseserial
virDomainBootMenu
virDomainPMState
virDomainGraphicsSpiceClipboardCopypaste
virDomainGraphicsSpiceAgentFileTransfer
virNetworkDNSForwardPlainNames

Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:

  <mknod state="on"/>, keep CAP_MKNOD capability
  <sys_chroot state="off"/> drop CAP_SYS_CHROOT capability

Users can restrict or give more capabilities than the default using
this mechanism.

LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:

    <interface type='network'>
      <source network='default'/>
      <guest dev="eth1"/>
    </interface>

In this example the network card will appear as eth1 in the guest.

Commit 93e82727 introduced numatune_conf.h file that contains
typedefs already defined in domain_conf.h, such as:

 - virDomainNumatune
 - virDomainNumatunePtr
 - virDomainDef
 - virDomainDefPtr

As numatune_conf.h is included by domain_conf.h, clang
complains about redefinition of typedef and the build fails.

In order to fix it, drop typedefs already defined by numatume_conf.h
from domain_conf.h.

There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways.  On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).

In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:

s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g

then shrunk long lines, and mainly functions, that were created after
that:

sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'

And to cope with the enum name, I haad to change the constants as
well:

s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g

Last thing I did was at least a little shortening of already long
name:

s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There are many places with numatune-related code that should be put
into special numatune_conf and this patch creates a basis for that.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.

The XML looks like:

<interface type='vhostuser'>
    <mac address='52:54:00:3b:83:1a'/>
    <source type='unix' path='/tmp/vhost.sock' mode='server'/>
    <model type='virtio'/>
</interface>
Signed-off-by: NMichele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In the future we might need to track state of individual images. Move
the readonly and shared flags to the virStorageSource struct so that we
can keep them in a per-image basis.

This introduces two new attributes "cmd_per_lun" and "max_sectors" same
with the names QEMU uses for virtio-scsi. An example of the XML:

<controller type='scsi' index='0' model='virtio-scsi' cmd_per_lun='50'
max_sectors='512'/>

The corresponding QEMU command line:

-device virtio-scsi-pci,id=scsi0,cmd_per_lun=50,max_sectors=512,
bus=pci.0,addr=0x3
Signed-off-by: NMike Perez <thingee@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

When looking for a port to allocate, the port allocator didn't take in
consideration ports that are statically set by the user.  Defining
these two graphics elements in the XML would cause an error, as the
port allocator would try to use the same port for the spice graphics
element:

    <graphics type='spice' autoport='yes'/>
    <graphics type='vnc' port='5900' autoport='no'/>

The new *[pP]ortReserved variables keep track of the ports that were
successfully tracked as used by the port allocator but that weren't
bound.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1081881Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>

The image labels are stored in the virStorageSource struct. Convert the
virDomainDiskDefGetSecurityLabelDef helper not to use the full disk def
and move it appropriately.

The current implementation of 'virsh blockcopy' (virDomainBlockRebase)
is limited to copying to a local file name.  But future patches want
to extend it to also copy to network disks.  This patch converts over
to a virStorageSourcePtr, although it should have no semantic change
visible to the user, in anticipation of those future patches being
able to use more fields for non-file destinations.

* src/conf/domain_conf.h (_virDomainDiskDef): Change type of
mirror information.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Localize
mirror parsing into new object.
(virDomainDiskDefFormat): Adjust clients.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainBlockCopy): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

As part of the work on backing chains, I'm finding that it would
be easier to directly manipulate chains of pointers (adding a
snapshot merely adjusts pointers to form the correct list) rather
than copy data from one struct to another.  This patch converts
domain disk source to be a pointer.

In this patch, the pointer is ALWAYS allocated (thanks in part to
the previous patch forwarding all disk def allocation through a
common point), and all other changse are just mechanical fallout of
the new type; there should be no functional change.  It is possible
that we may want to leave the pointer NULL for a cdrom with no
medium in a later patch, but as that requires a closer audit of the
source to ensure we don't fault on a null dereference, I didn't do
it here.

* src/conf/domain_conf.h (_virDomainDiskDef): Change type of src.
* src/conf/domain_conf.c: Adjust all clients.
* src/security/security_selinux.c: Likewise.
* src/qemu/qemu_domain.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_process.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* tests/securityselinuxlabeltest.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

A future patch wants to create disk definitions with non-zero
default contents; to avoid crashes, all callers that allocate
a disk definition should go through a common point.

I found allocation points by looking for any code that increments
ndisks, as well as any matches for ALLOC.*disk.  Most places that
modified ndisks were covered by the parse from XML to domain/device
definition by initial domain creation or device hotplug; I also
hand-checked all drivers that generate a device struct on the
fly during getXMLDesc.

* src/conf/domain_conf.h (virDomainDiskDefNew): New prototype.
* src/conf/domain_conf.c (virDomainDiskDefNew): New function.
(virDomainDiskDefParseXML): Use it.
* src/parallels/parallels_driver.c (parallelsAddHddInfo):
Likewise.
* src/qemu/qemu_command.c (qemuParseCommandLine): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/vmx/vmx.c (virVMXParseDisk): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenParseXM): Likewise.
* src/libvirt_private.syms (domain_conf.h): Export it.
Signed-off-by: NEric Blake <eblake@redhat.com>

In "src/conf/domain_conf.h" there are many enum declarations. The
cleanup in this header filer was started, but it wasn't enough and
there are many other files that has enum variables declared. So, the
commit was starting to be big. This commit finish the cleanup in this
header file and in other files that has enum variables, parameters,
or functions declared.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

In "src/conf/domain_conf.h" there are many enumerations (enum)
declarations to be converted as a typedef too. As mentioned before,
it's better to use a typedef for variable types, function types and
other usages. I think this file has most of those enum declarations
at "src/conf/". So, me and Eric Blake plan to keep the cleanups all
over the source code. This time, most of the files changed in this
commit are related to part of one file: "src/conf/domain_conf.h".
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>