Fix a few mispellings :-) of "successfully" and regenerate
docs/libvirt-*.xml.
* src/libvirt.c: Fix typos.
* src/secret/secret_driver.c: Fix typos.
* docs/libvirt-api.xml: Regenerate.
* docs/libvirt-refs.xml: Regenerate.

The upcoming tunnelled migration needs to be able to set
a migration in progress in the background, as well as
be able to cancel a migration when a problem has happened.
This patch allows for both of these to properly work.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

A simple misplaced break out of a switch results in:

  libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./vendor': No such file or directory
  libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./device': No such file or directory
  libvir: error : this function is not supported by the hypervisor: Failed to read product/vendor ID for 0000:00:54c.

when trying to passthrough a USB host device to qemu.

* src/security_selinux.c: fix a switch/break thinko

* src/conf/domain_conf.c: a simple typo in an XML domain file could lead
  to a crash, because we called STRPREFIX() on the looked up value without
  checking it was non-null.

* src/conf/domain_conf.c: when declaring a <interface type="bridge">
  tag, <source> needs a "bridge" attribute, but the parser complains
  about a missing "dev" attribute.

* Makefile.am: examples/domain-events/events-python should be added
  to dist tarball
* libvirt.spec.in: there is no makefile in domain-events but in
  domain-events/events-c and python/libvirtclass.txt has vanished

* docs/schemas/domain.rng: allow one <description> tag in the top level
  of the <domain> to store user information as text
* src/conf/domain_conf.c src/conf/domain_conf.h: extend the structure
  to store this text, grab it at parse time and save it back when
  present after <uuid>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

This is necessary for the dispatch functions to be able to use
streams in the future.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Right now, the stream stuff assumes that a stream is always
going to be used for transmit.  This is not the case, and in
fact doesn't work with the tunnelled migration stuff.  Add
a flag to remoteClientStream() to allow it to do RX only.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Function comments for virStreamEvent{Add,Update,Remove}Callback() are
missing a trailing ':'. Therefore apibuild.py fails to parse the comment
and warns about the missing ':'.

* docs/libvirt-api.xml, docs/libvirt-refs.xml: updated by apibuild.py
* src/libvirt.c: add missing ':' in function comments

The actual type of size_t is architecture dependent. Because the len
parameter is used as unsigned int in remoteSendStreamData(), change its
type to unsigned int.

* daemon/dispatch.[ch]: change size_t to unsigned int for
  remoteSendStreamData()

Use virStorageFileGetMetadata() to find any backing stores for images
and re-label them

Without this, qemu cannot access qcow2 backing files, see:

  https://bugzilla.redhat.com/497131

* src/security/security_selinux.c: re-label backing store files in
  SELinuxSetSecurityImageLabel()

* src/util/storage_file.c: add virStorageFileGetMetadata() so that
  the caller does not need to open the file

Finally, we get to the point of all this.

Move virStorageGetMetadataFromFD() to virStorageFileGetMetadataFromFD()
and move to src/util/storage_file.[ch]

There's no functional changes in this patch, just code movement

* src/storage/storage_backend_fs.c: move code from here ...

* src/util/storage_file.[ch]: ... to here

* src/libvirt_private.syms: export virStorageFileGetMetadataFromFD()

Introduce a metadata structure and make virStorageGetMetadataFromFD()
fill it in.

* src/util/storage_file.h: add virStorageFileMetadata

* src/backend/storage_backend_fs.c: virStorageGetMetadataFromFD() now
  fills in the virStorageFileMetadata structure

Prepare the code probing a file's format and associated metadata for
moving into libvirt_util.

* src/storage/storage_backend_fs.c: re-factor the format and metadata
  probing code in preparation for moving it

Rename virStorageVolFormatFileSystem to virStorageFileFormat and
move to src/util/storage_file.[ch]

* src/Makefile.am: add src/util/storage_file.[ch]

* src/conf/storage_conf.[ch]: move enum from here ...

* src/util/storage_file.[ch]: .. to here

* src/libvirt_private.syms: update To/FromString exports

* src/storage/storage_backend.c, src/storage/storage_backend_fs.c,
  src/vbox/vbox_tmpl.c: update for above changes

Commit 47cab734 changed the way how
qemud_client_message objects were reused. Before this commit
remoteDispatchClientRequest() reused the received message for normal responses
and to report non-fatal errors. If a fatal error occurred qemudWorker() frees
the message. After this commit non-fatal errors are reported by
remoteSerializeReplyError() using a new qemud_client_message object and the
original message leaks.

To fix this leak the original message has to be freed if
remoteSerializeReplyError() succeeds. If remoteSerializeReplyError()
fails the original message is freed in qemudWorker().

* daemon/dispatch.c: free qemud_client_message objects that will not be reused
  and would leak otherwise, also free the allocated qemud_client_message object
  in remoteSerializeError() if an error occurs

* qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
  qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.args,
  qemuxml2argvdata/qemuxml2argv-graphics-vnc.args,
  qemuxml2argvdata/qemuxml2argv-input-xen.args: Add in
  QEMU_AUDIO_DRV=none env variable

* src/vbox/vbox_tmpl.c: the vboxDomainDestroy forgot to wait for
  completion of the PowerDown command

* src/libvirt.c: Remove hand-crafted UUID parsers in favour of
  calling virParseUUID

When using VNC for graphics + keyboard + mouse, we shouldn't
then use the host OS for audio. Audio should go back over
VNC.

When using SDL for graphics, we should use the host OS for
audio since that's where the display is. We need to allow
certain QEMU env variables to be passed through to guest
too to allow choice of QEMU audio backend.

* qemud/libvirtd.sysconf: Mention QEMU/SDL audio env vars
* src/qemu_conf.c: Passthrough QEMU/SDL audio env for SDL display,
  disable host audio for VNC display

* src/remote_internal.c: Add helper APIs for processing data streams

* daemon/dispatch.c: Set streamTX flag on outgoing data packets
* daemon/qemud.h: Add streamTX flag to track outgoing data
* daemon/qemud.c: Re-enable further TX when outgoing data packet
  has been fully sent.
* daemon/stream.h, daemon/stream.c: Add method for enabling TX.
  Support reading from streams and transmitting data out to client

* daemon/stream.c: Handle incoming stream data packets, queuing until
  stream becomes writable. Handle stream completion handshake
* po/POTFILES.in: Add daemon/stream.c

Defines the extensions to the remote protocol for generic
data streams. Adds a bunch of helper code to the libvirtd
daemon for working with data streams.

* daemon/Makefile.am: Add stream.c/stream.h to build
* daemon/stream.c, qemud/stream.h: Generic helper functions for
  creating new streams, associating streams with clients, finding
  existing streams for a client and removing/deleting streams.
* src/remote/remote_protocol.x: Add a new 'REMOTE_STREAM' constant
  for the 'enum remote_message_type' for encoding stream data
  in wire messages. Add a new 'REMOTE_CONTINUE' constant to
  'enum remote_message_status' to indicate further data stream
  messsages are expected to follow.  Document how the
  remote_message_header is used to encode data streams
* src/remote/remote_protocol.h: Regenerate
* daemon/dispatch.c: Remove assumption that a error message
  sent to client is always type=REMOTE_REPLY. It may now
  also be type=REMOTE_STREAM. Add convenient method for
  sending outgoing stream data packets. Log and ignore
  non-filtered incoming stream packets. Add a method for
  serializing a stream error message
* daemon/dispatch.h:  Add API for serializing stream errors
  and sending stream data packets
* daemon/qemud.h: Add struct qemud_client_stream for tracking
  active data streams for clients. Tweak filter function
  operation so that it accepts a client object too.
* daemon/qemud.c: Refactor code for free'ing message objects
  which have been fully transmitted into separate method.
  Release all active streams when client shuts down. Change
  filter function to be responsible for queueing the message

* include/libvirt/libvirt.h.in: Public API contract for
  virStreamPtr object
* src/libvirt_public.syms: Export data stream APIs
* src/libvirt_private.syms: Export internal helper APIs
* src/libvirt.c: Data stream API driver dispatch
* src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr
  object
* src/driver.h: Define internal driver API for streams
* .x-sc_avoid_write: Ignore src/libvirt.c because it trips
  up on comments including write()
* python/Makefile.am: Add libvirt-override-virStream.py
* python/generator.py: Add rules for virStreamPtr class
* python/typewrappers.h, python/typewrappers.c: Wrapper
  for virStreamPtr
* docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate
  with new APIs

* src/vbox/vbox_tmpl.c: UTF-16 fixed version of Florian Vichot initial
  patch

* tools/virsh.c: it was possible to get vshDeinit to call itself back
  via vshError, remove the doexit parameter of vshError to avoid the
  possibility and make sure to exit directly after in those case.

* src/qemu/qemu_driver.c: Fix crash in scenario where XML
  parsing of hotplugged device failed & thus 'dev' is NULL

* src/qemu/qemu_monitor_text.c: Always print command and reply
  in qemuMonitorCommandWithHandler. Print all args in each monitor
  command API & remove redundant relpy printing

* src/qemu/qemu_monitor_text.h: Remove qemudMonitorCommand,
  qemudMonitorCommandWithFd, qemudMonitorCommandWithHandler,
  qemudMonitorCommandExtra low level APIs
* src/qemu/qemu_monitor_text.c: Replace s/qemud/qemuMonitor/

* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new
  qemuMonitorRemoveHostNetwork() command for removing host
  networks
* src/qemu/qemu_driver.c: Convert NIC hotplug methods over
  to use qemuMonitorRemoveHostNetwork()

* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Remove prefix arg
  from qemuBuildHostNetStr which is no longer required
* src/qemu/qemu_driver.c: Refactor to use qemuMonitorAddHostNetwork()
  API for adding host network
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorAddHostNetwork() method for adding host networks

* src/qemu/qemu_conf.c: Remove separator from qemuBuildNicStr()
  args, and remove hardcoded 'nic' prefix. Leave it upto callers
  instead
* src/qemu/qemu_driver.c: Switch over to using the new
  qemuMonitorAddPCINetwork() method for NIC hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorAddPCINetwork API for PCI network device hotplug

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
  APIs for processing file handles
* src/qemu/qemu_driver.c: Convert NIC hotplug method over to
  use   qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle