Add a new qemuMonitorGetTargetArch() method to support invocation
of the 'query-target' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a new qemuMonitorGetObjectProps() method to support invocation
of the 'device-list-properties' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a new qemuMonitorGetObjectTypes() method to support invocation
of the 'qom-list-types' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a new qemuMonitorGetEvents() method to support invocation
of the 'query-events' JSON monitor command. No HMP equivalent
is required, since this will only be used when JSON is available

The existing qemuMonitorJSONCheckEvents() method is refactored
to use this new method
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a new qemuMonitorGetCPUCommands() method to support invocation
of the 'query-commands' JSON monitor command. No HMP equivalent
is required, since this will only be used when JSON is available

The existing qemuMonitorJSONCheckCommands() method is refactored
to use this new method
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a new qemuMonitorGetCPUDefinitions() method to support invocation
of the 'query-cpu-definitions' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a new qemuMonitorGetMachines() method to support invocation
of the 'query-machines' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a new qemuMonitorGetVersion() method to support invocation
of the 'query-version' JSON monitor command. No HMP equivalent
is provided, since this will only be used for QEMU >= 1.2
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Recently, there have been some improvements made to qemu so it
supports seamless migration or something very close to it.
However, it requires libvirt interaction. Once qemu is migrated,
the SPICE server needs to send its internal state to the destination.
Once it's done, it fires SPICE_MIGRATE_COMPLETED event and this
fact is advertised in 'query-spice' output as well.
We must not kill qemu until SPICE server finishes the transfer.

There are a number of process related functions spread
across multiple files. Start to consolidate them by
creating a virprocess.{c,h} file
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Changing naming to follow the convention of "object" followed
by "action"
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

Upstream qemu has raised a concern about whether dumping guest
memory by reading guest paging tables is a security hole:
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02607.html

While auditing libvirt to see if we would be impacted, I noticed
that we had some dead code.  It is simpler to nuke the dead code
and limit our monitor code to just the subset we make use of.

* src/qemu/qemu_monitor.h (QEMU_MONITOR_DUMP): Drop poorly named
and mostly-unused enum.
* src/qemu/qemu_monitor.c (qemuMonitorDumpToFd): Drop arguments.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDump): Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDump): Likewise.
* src/qemu/qemu_driver.c (qemuDumpToFd): Update caller.

Don't bother checking for the existance of the HMP passthrough
command. Just try to execute it, and propagate the failure.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The current qemu capabilities are stored in a virBitmapPtr
object, whose type is exposed to callers. We want to store
more data besides just the flags, so we need to move to a
struct type. This object will also need to be reference
counted, since we'll be maintaining a cache of data per
binary. This change introduces a 'qemuCapsPtr' virObject
class. Most of the change is just renaming types and
variables in all the callers
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Technically speaking we should wait until we receive the QMP
greeting message before attempting to send any QMP monitor
commands. Mostly we've got away with this, but there is a race
in some QEMU which cause it to SEGV if you sent it data too
soon after startup. Waiting for the QMP greeting avoids the
race
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently qemuMonitorOpen() requires an address of the QEMU
monitor. When doing QMP based capabilities detection it is
easier if a pre-opened FD can be provided, since then the
monitor can be run on the STDIO console. Add a new API
qemuMonitorOpenFD() for such usage
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add some non-null annotations to qemuMonitorOpen and also
check that the error callback is set, since it is mandatory
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c

Refactoring existing code without causing any functional changes to
prepare for new code.

This patch makes the code reusable.
Signed-off-by: NShradha Shah <sshah@solarflare.com>

Make qemuAgentPtr and qemuMonitorPtr types use the virObject APIs
for reference counting
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Update the QEMU driver to use virReportError instead of
the qemuReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch cleans up some missing "%s" before translation macros,
for strings which are const without format specifiers

If QEMU supports the BALLOON_EVENT QMP event, then we can
avoid invoking 'query-balloon' when returning XML or the
domain info.

* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h:
  Add QEMU_CAPS_BALLOON_EVENT
* src/qemu/qemu_driver.c: Skip query-balloon in
  qemudDomainGetInfo and qemuDomainGetXMLDesc if we have
  QEMU_CAPS_BALLOON_EVENT set
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Check
  for BALLOON_EVENT at connect to monitor. Add callback
  for balloon change notifications
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h:
  Add handling of BALLOON_EVENT and impl 'query-events'
  check
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

dump-guest-memory is a new dump mechanism, and it can work when the
guest uses host devices. This patch adds a API to use this new
monitor command.
We will always use json mode if qemu's version is >= 0.15, so I
don't implement the API for text mode.

While unescaping the commands the commands passed through to the monitor
function qemuMonitorUnescapeArg() initialized lenght of the input string
to strlen()+1 which is fine for alloc but not for iteration of the
string.

This patch fixes the off-by-one error and drops the pointless check for
a single trailing slash that is automaticaly handled by the default
branch of switch.

When building as driver modules, it is not possible for the QEMU
driver module to reference the DTrace/SystemTAP probes linked into
the main libvirt.so. Thus we need to move the QEMU probes into a
separate file 'libvirt_qemu_probes.d'. Also rename the existing
file from 'probes.d' to 'libvirt_probes.d' while we're at it

* daemon/Makefile.am, src/internal.h: Include libvirt_probes.h
  instead of probes.h
* src/Makefile.am: Add rules for libvirt_qemu_probes.d
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
  src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h
* src/libvirt_probes.d: Rename from probes.d
* src/libvirt_qemu_probes.d: QEMU specific probes formerly
  in probes.d
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Commit cdce2f42 tried to silence a compiler warning on 32-bit builds,
but the gcc shipped with RHEL 5 is old enough that the type conversion
via multiplication by 1 was insufficient for the task.

* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Previous attempt
didn't get past all gcc versions.

On 32-bit platforms, gcc warns that the comparison between a long
and (ULLONG_MAX/1024/1024) is always false; throwing in a type
conversion shuts up the warning.

* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Shut gcc up.

With RHEL 6.2, virDomainBlockPull(dom, dev, bandwidth, 0) has a race
with non-zero bandwidth: there is a window between the block_stream
and block_job_set_speed monitor commands where an unlimited amount
of data was let through, defeating the point of a throttle.

This race was first identified in commit a9d3495e, and libvirt was
able to reduce the size of the window for that race.  In the meantime,
the qemu developers decided to fix things properly; per this message:
https://lists.gnu.org/archive/html/qemu-devel/2012-04/msg03793.html
the fix will be in qemu 1.1, and changes block-job-set-speed to use
a different parameter name, as well as adding a new optional parameter
to block-stream, which eliminates the race altogether.

Since our documentation already mentioned that we can refuse a non-zero
bandwidth for some hypervisors, I think the best solution is to do
just that for RHEL 6.2 qemu, so that the race is obvious to the user
(anyone using stock RHEL 6.2 binaries won't have this patch, and anyone
building their own libvirt with this patch for RHEL can also rebuild
qemu to get the modern semantics, so it is no real loss in behavior).

Meanwhile the code must be fixed to honor actual qemu 1.1 naming.
Rename the parameter to 'modern', since the naming difference now
covers more than just 'async' block-job-cancel.  And while at it,
fix an unchecked integer overflow.

* src/qemu/qemu_monitor.h (enum BLOCK_JOB_CMD): Drop unused value,
rename enum to match conventions.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Reflect enum rename.
* src/qemu_qemu_monitor_json.h (qemuMonitorJSONBlockJob): Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Likewise,
and support difference between RHEL 6.2 and qemu 1.1 block pull.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Reject
bandwidth during pull with too-old qemu.
* src/libvirt.c (virDomainBlockPull, virDomainBlockRebase):
Document this.

Most of our errors complaining about an inability to support a
particular action due to qemu limitations used CONFIG_UNSUPPORTED,
but we had a few outliers.  Reported by Jiri Denemark.

* src/qemu/qemu_command.c (qemuBuildDriveDevStr): Prefer
CONFIG_UNSUPPORTED.
* src/qemu/qemu_driver.c (qemuDomainReboot)
(qemuDomainBlockJobImpl): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachPciControllerDevice):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorTransaction)
(qemuMonitorBlockJob, qemuMonitorSystemWakeup): Likewise.

RHEL 6.2 was released with an early version of block jobs, which only
worked on the qed file format, where the commands were spelled with
underscore (contrary to QMP style), and where 'block_job_cancel' was
synchronous and did not trigger an event.

The upcoming qemu 1.1 release has fixed these short-comings [1][2]:
the commands now work on multiple file types, are spelled with dash,
and 'block-job-cancel' is asynchronous and emits an event upon conclusion.

[1]qemu commit 370521a1d6f5537ea7271c119f3fbb7b0fa57063
[2]https://lists.gnu.org/archive/html/qemu-devel/2012-04/msg01248.html

This patch recognizes the new spellings, and fixes virDomainBlockRebase
to give a graceful error when talking to a too-old qemu on a partial
rebase attempt.  Fixes for the new semantics will come later.  This
patch also removes a bogus ATTRIBUTE_NONNULL mistakenly added in
commit 10ec36e2.

* src/qemu/qemu_capabilities.h (QEMU_CAPS_BLOCKJOB_SYNC)
(QEMU_CAPS_BLOCKJOB_ASYNC): New bits.
* src/qemu/qemu_capabilities.c (qemuCaps): Name them.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCheckCommands): Set
them.
(qemuMonitorJSONBlockJob): Manage both command names.
(qemuMonitorJSONDiskSnapshot): Minor formatting fix.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Alter signature.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Pass through
capability bit.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Update callers.

The oVirt developers have stated that the real reasons they want
to have qemu reuse existing volumes when creating a snapshot are:
1. the management framework is set up so that creation has to be
done from a central node for proper resource tracking, and having
libvirt and/or qemu create things violates the framework, and
2. qemu defaults to creating snapshots with an absolute path to
the backing file, but oVirt wants to manage a backing chain that
uses just relative names, to allow for easier migration of a chain
across storage locations.

When 0.9.10 added VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT (commit
4e9953a4), it only addressed point 1, but libvirt was still using
O_TRUNC which violates point 2.  Meanwhile, the new qemu
'transaction' monitor command includes a new optional mode argument
that will force qemu to reuse the metadata of the file it just
opened (with the burden on the caller to have valid metadata there
in the first place).  So, this tweaks the meaning of the flag to
cover both points as intended for use by oVirt.  It is not strictly
backward-compatible to 0.9.10 behavior, but it can be argued that
the O_TRUNC of 0.9.10 was a bug.

Note that this flag is all-or-nothing, and only selects between
'existing' and the default 'absolute-paths'.  A more flexible
approach that would allow per-disk selections, as well as adding
support for the 'no-backing-file' mode, would be possible by
extending the <domainsnapshot> xml to have a per-disk mode, but
until we have a management application expressing a need for that
additional complexity, it is not worth doing.

* src/libvirt.c (virDomainSnapshotCreateXML): Tweak documentation.
* src/qemu/qemu_monitor.h (qemuMonitorDiskSnapshot): Add
parameters.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskSnapshot): Pass them
through.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot): Use
new monitor command arguments.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive)
(qemuDomainSnapshotCreateSingleDiskActive): Adjust callers.
(qemuDomainSnapshotDiskPrepare): Allow qed, modify rules on reuse.

QEmu 1.1 is adding a 'transaction' command to the JSON monitor.
Each element of a transaction corresponds to a top-level command,
with the additional guarantee that the transaction flushes all
pending I/O, then guarantees that all actions will be successful
as a group or that failure will roll back the state to what it
was before the monitor command.  The difference between a
top-level command:

{ "execute": "blockdev-snapshot-sync", "arguments":
  { "device": "virtio0", ... } }

and a transaction:

{ "execute": "transaction", "arguments":
  { "actions": [
    { "type": "blockdev-snapshot-sync", "data":
      { "device": "virtio0", ... } } ] } }

is just a couple of changed key names and nesting the shorter
command inside a JSON array to the longer command.  This patch
just adds the framework; the next patch will actually use a
transaction.

* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommand): Move
guts...
(qemuMonitorJSONMakeCommandRaw): ...into new helper.  Add support
for array element.
(qemuMonitorJSONTransaction): New command.
(qemuMonitorJSONDiskSnapshot): Support use in a transaction.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot): Add
argument.
(qemuMonitorJSONTransaction): New declaration.
* src/qemu/qemu_monitor.h (qemuMonitorTransaction): Likewise.
(qemuMonitorDiskSnapshot): Add argument.
* src/qemu/qemu_monitor.c (qemuMonitorTransaction): New wrapper.
(qemuMonitorDiskSnapshot): Pass argument on.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Update caller.

This patch introduces a new event type for the QMP event
SUSPEND:

    VIR_DOMAIN_EVENT_ID_PMSUSPEND

The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:

typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
                                        virDomainPtr dom,
                                        int reason,
                                        void *opaque);

"reason" is unused currently, always passes "0".

This patch introduces a new event type for the QMP event
WAKEUP:

    VIR_DOMAIN_EVENT_ID_PMWAKEUP

The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:

typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
                                       virDomainPtr dom,
                                       int reason,
                                       void *opaque);

"reason" is unused currently, always passes "0".

This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):

    VIR_DOMAIN_EVENT_ID_TRAY_CHANGE

The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:

enum {
    VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
    VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,

\#ifdef VIR_ENUM_SENTINELS
    VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;

typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
                                           virDomainPtr dom,
                                           const char *devAlias,
                                           int reason,
                                           void *opaque);

Using 'unsigned long' for memory values is risky on 32-bit platforms,
as a PAE guest can have more than 4GiB memory.  Our API is
(unfortunately) locked at 'unsigned long' and a scale of 1024, but
the rest of our system should consistently use 64-bit values,
especially since the previous patch centralized overflow checking.

* src/conf/domain_conf.h (_virDomainDef): Always use 64-bit values
for memory.  Change hugepage_backed to a bool.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefCheckABIStability, virDomainDefFormatInternal): Fix
clients.
* src/vmx/vmx.c (virVMXFormatConfig): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr, xenFormatSxpr): Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetULongLong): New function.
(xenXMConfigGetULong, xenXMConfigSetInt): Avoid truncation.
(xenParseXM, xenFormatXM): Fix clients.
* src/phyp/phyp_driver.c (phypBuildLpar): Likewise.
* src/openvz/openvz_driver.c (openvzDomainSetMemoryInternal):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDefineXML): Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* src/qemu/qemu_monitor.h (qemuMonitorGetBalloonInfo): Likewise.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetInfo)
(qemuDomainGetXMLDesc): Likewise.
* src/uml/uml_conf.c (umlBuildCommandLine): Likewise.

This actually wires up the new optional parameter to block_stream:
http://wiki.qemu.org/Features/LiveBlockMigration/ImageStreamingAPI

The error checking is still sparse, since libvirt must not use
qemu-img or header probing on a qcow2 file in use by qemu to
check if the backing file name is valid; so for now, libvirt is
relying on qemu to diagnose an incorrect backing name.  Fixing this
will require libvirt to track the entire backing file chain at the
time qemu is started and keeps it updated with snapshot and pull
operations.

* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Add
parameter, and update callers.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob): Update
signature.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Update caller.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Likewise.

Block job commands are not part of upstream qemu until 1.1; and
proper support of job completion and cancellation depends on being
able to receive QMP events, which implies the JSON monitor.
Additionally, some early versions of block job commands were
backported to RHEL qemu, but these versions lacked asynchronous
job cancellation and partial block pull, so there are several
patches that will still be needed in this area of libvirt code
to support both flavors of block job commands.

Due to earlier patches in libvirt, we are guaranteed that all versions
of qemu that support block job commands already require libvirt to
use the JSON monitor.  That means that the text version of block jobs
will not be used, and having to refactor two copies of the block job
handlers makes no sense.  So instead, we delete the text handlers.

* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Drop text monitor
support.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextBlockJob): Delete.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextParseBlockJobOne)
(qemuMonitorTextParseBlockJob, qemuMonitorTextBlockJob):
Likewise.