* src/qemu/qemu_audit.h (qemuAuditCgroupMajor)
(qemuAuditCgroupPath): Add parameter.
* src/qemu/qemu_audit.c (qemuAuditCgroupMajor)
(qemuAuditCgroupPath): Add 'acl=rwm' to cgroup audit entries.
* src/qemu/qemu_cgroup.c: Update clients.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Likewise.

Adding audit points showed that we were granting too much privilege
to qemu; it should not need any mknod rights to recreate any
devices.  On the other hand, lxc should have all device privileges.
The solution is adding a flag parameter.

This also lets us restrict write access to read-only disks.

* src/util/cgroup.h (virCgroup*Device*): Adjust prototypes.
* src/util/cgroup.c (virCgroupAllowDevice)
(virCgroupAllowDeviceMajor, virCgroupAllowDevicePath)
(virCgroupDenyDevice, virCgroupDenyDeviceMajor)
(virCgroupDenyDevicePath): Add parameter.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update clients.
* src/lxc/lxc_controller.c (lxcSetContainerResources): Likewise.
* src/qemu/qemu_cgroup.c: Likewise.
(qemuSetupDiskPathAllow): Also, honor read-only disks.

Also add ATTRIBUTE_NONNULL markers.

* src/qemu/qemu_audit.h: The pattern qemuDomainXXXAudit is
inconsistent; prefer qemuAuditXXX instead.
* src/qemu/qemu_audit.c: Reflect the renames.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_hotplug.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_process.c: Likewise.

Device names can be manipulated, so it is better to also log
the major/minor device number corresponding to the cgroup ACL
changes that libvirt made.  This required some refactoring
of the relatively new qemu cgroup audit code.

Also, qemuSetupChardevCgroup was only auditing on failure, not success.

* src/qemu/qemu_audit.h (qemuDomainCgroupAudit): Delete.
(qemuAuditCgroup, qemuAuditCgroupMajor, qemuAuditCgroupPath): New
prototypes.
* src/qemu/qemu_audit.c (qemuDomainCgroupAudit): Rename...
(qemuAuditCgroup): ...and drop a parameter.
(qemuAuditCgroupMajor, qemuAuditCgroupPath): New functions, to
allow listing device major/minor in audit.
(qemuAuditGetRdev): New helper function.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Adjust callers.
* src/qemu/qemu_cgroup.c (qemuSetupDiskPathAllow)
(qemuSetupHostUsbDeviceCgroup, qemuSetupCgroup)
(qemuTeardownDiskPathDeny): Likewise.
(qemuSetupChardevCgroup): Likewise, fixing missing audit.

virRun gives pretty useful error output, let's not overwrite it unless there
is a good reason. Some places were providing more information about what
the commands were _attempting_ to do, however that's usually less useful from
a debugging POV than what actually happened.

* src/qemu/qemu_driver.c: qemuDomainUpdateDeviceFlags() is not disk
  specific as the message suggests

Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

The way to detach a USB disk is the same as that to detach a SCSI
disk. Rename this function and we can use it to detach a USB disk.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

qemudDomainSaveImageStartVM was evil - it closed the incoming fd
argument on some, but not all, code paths, without informing the
caller about that action.  No wonder that this resulted in
double-closes: https://bugzilla.redhat.com/show_bug.cgi?id=672725

* src/qemu/qemu_driver.c (qemudDomainSaveImageStartVM): Alter
signature, to avoid double-close.
(qemudDomainRestore, qemudDomainObjRestore): Update callers.

Relax the restriction that the hash table key must be a string
by allowing an arbitrary hash code generator + comparison func
to be provided

* util/hash.c, util/hash.h: Allow any pointer as a key
* internal.h: Include stdbool.h as standard.
* conf/domain_conf.c, conf/domain_conf.c,
  conf/nwfilter_params.c, nwfilter/nwfilter_gentech_driver.c,
  nwfilter/nwfilter_gentech_driver.h, nwfilter/nwfilter_learnipaddr.c,
  qemu/qemu_command.c, qemu/qemu_driver.c,
  qemu/qemu_process.c, uml/uml_driver.c,
  xen/xm_internal.c: s/char */void */ in hash callbacks

* src/qemu/qemu_audit.h (qemuDomainMemoryAudit)
(qemuDomainVcpuAudit): New prototypes.
* src/qemu/qemu_audit.c (qemuDomainResourceAudit)
(qemuDomainMemoryAudit, qemuDomainVcpuAudit): New functions.
(qemuDomainStartAudit): Call as appropriate.
* src/qemu/qemu_driver.c (qemudDomainSetMemory)
(qemudDomainHotplugVcpus): Likewise.

* src/qemu/qemu_audit.h (qemuDomainCgroupAudit): New prototype.
* src/qemu/qemu_audit.c (qemuDomainCgroupAudit): Implement it.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Add audit.
* src/qemu/qemu_cgroup.c (qemuSetupDiskPathAllow)
(qemuSetupChardevCgroup, qemuSetupHostUsbDeviceCgroup)
(qemuSetupCgroup, qemuTeardownDiskPathDeny): Likewise.

* src/qemu/qemu_cgroup.h (struct qemuCgroupData): New helper type.
(qemuSetupDiskPathAllow, qemuSetupChardevCgroup)
(qemuTeardownDiskPathDeny): Drop unneeded prototypes.
(qemuSetupDiskCgroup, qemuTeardownDiskCgroup): Adjust prototype.
* src/qemu/qemu_cgroup.c
(qemuSetupDiskPathAllow, qemuSetupChardevCgroup)
(qemuTeardownDiskPathDeny): Mark static and use new type.
(qemuSetupHostUsbDeviceCgroup): Use new type.
(qemuSetupDiskCgroup): Alter signature.
(qemuSetupCgroup): Adjust caller.
* src/qemu/qemu_hotplug.c (qemuDomainAttachHostUsbDevice)
(qemuDomainDetachPciDiskDevice, qemuDomainDetachSCSIDiskDevice):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainAttachDevice)
(qemuDomainUpdateDeviceFlags): Likewise.

* src/util/cgroup.c (virCgroupAllowDevicePath)
(virCgroupDenyDevicePath): Don't fail with EINVAL for
non-devices.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update caller.
* src/qemu/qemu_cgroup.c (qemuSetupDiskPathAllow)
(qemuSetupChardevCgroup, qemuSetupHostUsbDeviceCgroup)
(qemuSetupCgroup, qemuTeardownDiskPathDeny): Likewise.

Remove the <stdbool.h> header from all source files / headers
and just put it into internal.h

* src/internal.h: Add <stdbool.h>

This is done for two reasons:
- we are getting very close to 64 flags which is the maximum we can use
  with unsigned long long
- by using LL constants in enum we already violates C99 constraint that
  enum values have to fit into int

The new name complies more with the fact that it contains a set of
qemuCapsFlags.

Leak introduced in commit d6623003.

* src/qemu/qemu_driver.c (qemuSecurityInit): Avoid leak on failure.
* src/security/security_stack.c (virSecurityStackClose): Avoid
leaking component drivers.

The introduction of the v3 migration protocol, along with
support for migration cookies, will significantly expand
the size of the migration code. Move it all to a separate
file to make it more manageable

The functions are not moved 100%. The API entry points
remain in the main QEMU driver, but once the public
virDomainPtr is resolved to the internal virDomainObjPtr,
all following code is moved.

This will allow the new v3 API entry points to call into the
same shared internal migration functions

* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
  qemuDomainFormatXML helper method
* src/qemu/qemu_driver.c: Remove all migration code
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add
  all migration code.

Move the qemudStartVMDaemon and qemudShutdownVMDaemon
methods into a separate file, renaming them to
qemuProcessStart, qemuProcessStop. All helper methods
called by these are also moved & renamed to match

* src/Makefile.am: Add qemu_process.c/.h
* src/qemu/qemu_command.c: Add qemuDomainAssignPCIAddresses
* src/qemu/qemu_command.h: Add VNC port min/max
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
  domain event queue helpers
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
  all QEMU process startup/shutdown functions
* src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add
  all QEMU process startup/shutdown functions

"qemudDomainSaveFlag" goto wrong label "endjob", which will cause
error when security manager trying to restore label (regression).

As it's more reasonable to check if vm is shutoff immediately, and
return right away if it is, remove the checking in "qemudDomainSaveFlag",
and add checking in "qemudDomainSave".

* src/qemu/qemu_driver.c

The processWatchdogEvent fix is real, although it can only trigger
on OOM, since bad things happen if doCoreDump is called with a NULL
pathname argument.  The other fixes silence clang, but aren't a real
bug because virReportErrorHelper tolerates a NULL format string even
though *printf does not.

* src/qemu/qemu_driver.c (processWatchdogEvent): Exit on OOM.
(qemuDomainIsActive, qemuDomainIsPersistent, qemuDomainIsUpdated):
Provide valid message.

Commit 9962e406 introduced a
problem where if the VM failed to startup, it would not be
correctly cleaned up. Amongst other things the SELinux
security label would not be removed, which prevents the VM
from ever starting again.

The virDomainIsActive() check at the start of qemudShutdownVMDaemon
checks for vm->def->id not being -1. By moving the assignment of the
VM id to the start of qemudStartVMDaemon, we can ensure cleanup will
occur on failure

* src/qemu/qemu_driver.c: Move initialization of 'vm->def->id'
  so that qemudShutdownVMDaemon() will process the shutdown

Also use VIR_ERR_OPERATION_INVALID instead of VIR_ERR_NO_SUPPORT, as
the operation could succeed when the cgroup controller was mounted.

QEMUD_CMD_FLAG_PCI_MULTIBUS should be set in the function
qemuCapsExtractVersionInfo()

The flag QEMUD_CMD_FLAG_PCI_MULTIBUS is used in the function
qemuBuildDeviceAddressStr(). All callers get qemuCmdFlags
by the function qemuCapsExtractVersionInfo() except that
testCompareXMLToArgvFiles() in qemuxml2argvtest.c.

So we should set QEMUD_CMD_FLAG_PCI_MULTIBUS in the function
qemuCapsExtractVersionInfo() instead of qemuBuildCommandLine()
because the function qemuBuildCommandLine() does not be called
when we attach a pci device.

tests: set QEMUD_CMD_FLAG_PCI_MULTIBUS in testCompareXMLToArgvFiles()

set QEMUD_CMD_FLAG_PCI_MULTIBUS before calling qemuBuildCommandLine()
as the flags is not set by qemuCapsExtractVersionInfo().
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

Quite a few hosts don't have cgroups mounted and so see warnings
from libvirt logged, which then cause bug reports, etc. Reduce
the log level to INFO so they're not visible by default

* src/qemu/qemu_driver.c: Reduce log level for cgroups

* src/qemu/qemu_driver.c (qemuGetSysinfo): New function.
(qemuDriver): Install it.

* src/driver.h (virDrvGetSysinfo): New typedef.
(_virDriver): New callback member.
* src/esx/esx_driver.c (esxDriver): Add stub for driver.
* src/lxc/lxc_driver.c (lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/test/test_driver.c (testDriver): Likewise.
* src/uml/uml_driver.c (umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (Driver): Likewise.
* src/vmware/vmware_driver.c (vmwareDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.

Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:

    virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'

which is not a very convenient way of debugging qemu.

This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just

    virsh qemu-monitor-command --hmp DOM "info kvm"

Also the result is converted from

    {"return":"kvm support: enabled\r\n"}

to just plain HMP:

    kvm support: enabled

If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.

* src/qemu/qemu_driver.c (qemudShutdownVMDaemon): Check that vm is
still active.
Reported by Wen Congyang as follows:

Steps to reproduce this bug:

1. use gdb to debug libvirtd, and set breakpoint in the function
   qemuConnectMonitor()
2. start a vm, and the libvirtd will be stopped in qemuConnectMonitor()
3. kill -STOP $(cat /var/run/libvirt/qemu/<domain>.pid)
4. continue to run libvirtd in gdb, and libvirtd will be blocked in the
   function qemuMonitorSetCapabilities()
5. kill -9 $(cat /var/run/libvirt/qemu/<domain>.pid)

Here is log of the qemu:
=========
LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin ...
char device redirected to /dev/pts/3
2011-01-27 09:38:48.101: shutting down
2011-01-27 09:41:26.401: shutting down
=========

The vm is shut down twice. I do not know whether this behavior has
side effect, but I think we should shutdown the vm only once.

* src/qemu/qemu_driver.c

The refactoring of QEMU command startup was comitted with
a couple of VIR_WARN lines left in from debugging.

* src/qemu/qemu_driver.c: Remove log warning lines

When qemuMonitorSetCapabilities() fails, there is no need to
call qemuMonitorClose(), because the caller will already see
the error code and tear down the entire VM. The extra call to
qemuMonitorClose resulted in a double-free due to it removing
a ref count prematurely.

* src/qemu/qemu_driver.c: Remove premature close of monitor

Regression in commit caa805ea let a lot of bad messages slip in.

* cfg.mk (msg_gen_function): Fix function name.
* src/qemu/qemu_cgroup.c (qemuRemoveCgroup): Fix fallout from
'make syntax-check'.
* src/qemu/qemu_driver.c (qemudDomainGetInfo)
(qemuDomainWaitForMigrationComplete, qemudStartVMDaemon)
(qemudDomainSaveFlag, qemudDomainAttachDevice)
(qemuDomainUpdateDeviceFlags): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachHostUsbDevice)
(qemuDomainDetachPciDiskDevice, qemuDomainDetachSCSIDiskDevice):
Likewise.

Steps to reproduce this bug:
1. service libvirtd start
2. virsh start <domain>
3. kill -STOP $(cat /var/run/libvirt/qemu/<domain>.pid)
4. service libvirtd restart
5. kill -9 $(cat /var/run/libvirt/qemu/<domain>.pid)

Then libvirtd will core dump or be in deadlock state.

Make sure that json is built into libvirt and the version
of qemu is newer than 0.13.0.

The reason of libvirtd cores dump is that:
We add vm->refs when we alloc the memory, and decrease it
in the function qemuHandleMonitorEOF() in other thread.

We add vm->refs in the function qemuConnectMonitor() and
decrease it when the vm is inactive.

The libvirtd will block in the function qemuMonitorSetCapabilities()
because the vm is stopped by signal SIGSTOP. Now the vm->refs is 2.

Then we kill the vm by signal SIGKILL. The function
qemuMonitorSetCapabilities() failed, and then we will decrease vm->refs
in the function qemuMonitorClose().
In another thread, mon->fd is broken and the function
qemuHandleMonitorEOF() is called.

If qemuHandleMonitorEOF() decreases vm->refs before qemuConnectMonitor()
returns, vm->refs will be decrease to 0 and the memory is freed.

We will call qemudShutdownVMDaemon() as qemuConnectMonitor() failed.
The memory has been freed, so qemudShutdownVMDaemon() is too dangerous.

We will reference NULL pointer in the function virDomainConfVMNWFilterTeardown():
=============
void
virDomainConfVMNWFilterTeardown(virDomainObjPtr vm) {
    int i;

    if (nwfilterDriver != NULL) {
        for (i = 0; i < vm->def->nnets; i++)
            virDomainConfNWFilterTeardown(vm->def->nets[i]);
    }
}
============
vm->def->nnets is not 0 but vm->def->nets is NULL(We don't set vm->def->nnets
to 0 when we free vm).

We should add an extra reference of vm to avoid vm to be deleted if
qemuConnectMonitor() failed.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

If a guest image is saved in compressed format, and the restore fails
in some way after the intermediate process used to uncompress the
image has been started, but before qemu has been started to hook up to
the uncompressor, libvirt will endlessly wait for the uncompressor to
finish, but it never will because it's still waiting to have something
hooked up to drain its output.

The solution is to close the pipes on both sides of the uncompressor,
then send a SIGTERM before calling waitpid on it (only if the restore
has failed, of course).

This patch is a partial resolution to the following bug:

   https://bugzilla.redhat.com/show_bug.cgi?id=667756

(to complete the fix, an updated selinux-policy package is required,
to add the policy that allows libvirt to set the context of a fifo,
which was previously not allowed).

Explanation : When an incoming migration is over a pipe (for example,
if the image was compressed and is being fed through gzip, or was on a
root-squash nfs server, so needed to be opened by a child process
running as a different uid), qemu cannot read it unless the selinux
context label for the pipe has been set properly.

The solution is to check the fd used as the source of the migration
just before passing it to qemu; if it's a fifo (implying that it's a
pipe), we call the newly added virSecurityManagerSetFDLabel() function
to set the context properly.

The problem was introduced by commit 4303c91c, which removed the checking
of domain state, this patch is to fix it.

Otherwise, improper error will be thrown, e.g.

error: Failed to save domain rhel6 state
error: cannot resolve symlink /var/lib/libvirt/qemu/save/rhel6.save: No such
file or directory