Signed-off-by: NSeeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: NChristian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce new 'multidevs' option for filesystem.

  <filesystem type='mount' accessmode='mapped' multidevs='remap'>
    <source dir='/path'/>
    <target dir='mount_tag'>
  </filesystem>

This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: NChristian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The QEMU 9pfs 'multidevs' option exists since QEMU 4.2. Probe QEMU's
command line set though to check whether this option is really
available, and if yes enable this new QEMU_CAPS_FSDEV_MULTIDEVS
capability on libvirt side.
Signed-off-by: NChristian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Now that all its helper functions are in qemu_validate.c, we can
move the function itself. The helpers can become static again since
they're all in the same file.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

This will allow to move qemuDomainDeviceDefValidate() itself in
the next patch in a cleaner way.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Move the function and all its static helper functions.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This function will remain public due to its usage in qemublocktest.c
even after moving qemuDomainDeviceDefValidate(). The position of its
header in qemu_validate.h is no accident.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

This function alone requires other 3 static functions to be
moved as well, thus let's move it in its own patch.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

qemuDomainChrDefValidate() has a lot of static helpers functions
that needed to be moved as well.

Other functions from qemuDomainDeviceDefValidate() that were
also moved:
- qemuValidateDomainSmartcardDef
- qemuValidateDomainRNGDef
- qemuValidateDomainRedirdevDef
- qemuValidateDomainWatchdogDef
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The next big task is to move qemuDomainDeviceDefValidate() to
qemu_validation.c, which is a function that calls a lot of
other static helper functions. This patch starts it by moving
qemuDomainDeviceDefValidateAddress().
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Move the static functions qemuDomainValidateDef() uses, as well as
qemuDomainValidateDef() itself to qemu_validate.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This patch introduces a new file to host domain validations from
the QEMU driver. And to get things started, let's move
qemuDomainDefValidateFeatures() to this new file.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Both <encryption> and <diskSourceCommon> were absent from the <source>
element defined in domainsnapshot.rng
Signed-off-by: NHan Han <hhan@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This is the only instance of g_autofree change applicable for
qemu_checkpoint.c
Signed-off-by: NSeeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

When the comment in libvirtd.sasl was last updated with

  commit fe772f24
  Author: Cole Robinson <crobinso@redhat.com>
  Date:   Sat Oct 20 14:10:03 2012 -0400

    daemon: Avoid 'Could not find keytab file' in syslog

it was noted that only old versions of kerberos would need the
environment variable to be set: that was more than seven years
ago, so it's safe to assume that none of our current target
platforms still requires that hack and setting the appropriate
key in the configuration file will be enough.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

libvirtd supports this feature, and virtqemud ultimately calls to
the same code so it does as well: advertise it in the sysconf file
for the latter, as is already the case for the former.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This follows the example set by libvirtd, and makes it easier for
the admin to tweak the timeout or disable it altogether.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

While not terribly useful in general, tweaking each daemon's
timeout (or disabling it off altogether) is a valid use case which
we can very easily support while being consistent with what already
happens for libvirtd. This is a first step in that direction.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

We're going to add many more later, so start by adjusting the
existing ones to more closely follow the example set by libvirtd.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

When using systemd we want to take advantage of socket activation
instead of keeping daemons running all the time, so we default to
shutting them down after two minutes of inactivity.

At the same time, we want it to be possible for the admin to opt
out of this behavior and disable timeouts entirely. A very natural
way to do so would be to specify a zero-length timeout, but that's
currently not accepted by the command line parser. Address that.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

When redefining checkpoints from scratch we'd not set the 'current'
checkpoint if there wasn't any. This meant that the code wasn't ever
able to set a 'current' checkpoint as any other one looks up if the
parent of the redefined checkpoint is current.

Since the backup code then requires the current checkpoint to start the
lookup we'd not be able to perform a backup after restoring the
checkpoint hierarchy.
Reported-by: NEyal Shenitzky <eshenitz@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Skip the liveness and capability checks when redefining checkpoints as
we don't need qemu interactions to update the metadata.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Now that v5.0.0-rc1 was tagged, update the capabilities to make sure
that everything works as expected.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

QEMU uses the 'devname' string in the QAPI schema so a bump would
trigger this check. Exempt all of the capabilities data from the check.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

QEMU now formalized the arguments of netdev-add in the schema, so we
must use a real type to pass the schema validation once the schema is
updated.

The 'user' variant doesn't have any other mandatory fields.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Trying to squeeze the validator output into the monitor reply message
doesn't make sense and doesn't work well as it's not well formed JSON:

54) qemuMonitorJSONAddNetdev                                          ... libvirt:  error : internal error: cannot parse json { "error":  { "desc": "failed to validate arguments of 'netdev_add' against QAPI schema: {
   ERROR: variant 'test' for discriminator 'type' not found
",    "class": "UnexpectedCommand" } }: lexical error: invalid character inside string.
          ev_add' against QAPI schema: {    ERROR: variant 'test' for
                     (right here) ------^
FAILED

Output it to stderr if requested and just note that schema validation
failed in the error message:

54) qemuMonitorJSONAddNetdev                                          ...
failed to validate arguments of 'netdev_add' against QAPI schema
args:
{
  "id": "net0",
  "type": "test"
}

validator output:
 {
   ERROR: variant 'test' for discriminator 'type' not found

libvirt: QEMU Driver error : internal error: unable to execute QEMU command 'netdev_add': failed to validate arguments of 'netdev_add' against QAPI schema (to see debug output use VIR_TEST_DEBUG=2)
FAILED
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The test name is concatenated from a prefix with the test name, but no
space was added so the output looked wrong.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add a comment noting that job update can cause the pointer to be invalid
and thus should not be accessed after.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NPavel Mores <pmores@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

No callers use it any more. Additionally if qemuBlockJobUpdate was
called with the last reference of the job e.g. in
qemuBlockJobRefreshJobs, the reading of the job state would happen from
freed memory.
Reported-by: NPavel Mores <pmores@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NPavel Mores <pmores@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Upcoming patch will remove it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NPavel Mores <pmores@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

virStorageFileSupportsSecurityDriver ends up initializing the storage
file backend which after the recent changes to the daemon architecture
may end up dlopening of the backend modules.

Since this is required only for remote storage we can optimize the call
by moving the check whether the backend is supported to the branch which
deals with remote storage.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NPavel Mores <pmores@redhat.com>

Treat the shortcut for chowning local files as a stand-alone section
by returning success from it and refactor the rest so that the cleanup
section is inline.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NPavel Mores <pmores@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

* docs/news.xml: update for the release
Signed-off-by: NDaniel Veillard <veillard@redhat.com>