iSCSI is a bit odd in this aspect since it only supports URIs but using
the 'filename' property and does not have any alternative syntax.

Along with the legacy URI based syntax add support for the brand-new
fully object based syntax.

http(s), ftp(s) and tftp use URIs for volume definitions in the JSON
pseudo protocol so it's pretty straightforward to add support for them.

JSON pseudo protocol for qemu allows to explicitly specify devices.
Add convertor to the internal type.

Add a modular parser that will allow to parse 'json' backing definitions
that are supported by qemu. The initial implementation adds support for
the 'file' driver.

Due to the approach qemu took to implement the JSON backing strings it's
possible to specify them in two approaches.

The object approach:
    json:{ "file" : { "driver":"file",
                      "filename":"/path/to/file"
                    }
         }

And a partially flattened approach:
    json:{"file.driver":"file"
          "file.filename":"/path/to/file"
         }

Both of the above are supported by qemu and by the code added in this
commit. The current implementation de-flattens the first level ('file.')
if possible and required. Other handling may be added later but
currently only one level was possible anyways.

It's just read.

The cur_balloon also increases/decreases with dimm hotplug/unplug.
To be consistent, adjust the value for coldplug too. This was inconsistently
taken care when cur_ballon != memory to begin with. The patch fixes it
irrespective of that.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Since commit c4bdff19, the path to the configuration file has been constructed
in the following manner:
 - if no config filename was passed to virConfLoadConfigPath, libvirt.conf was
 used as default
 - otherwise the filename was concatenated with
 "<config_dir>/libvirt/libvirt%s%s.conf" which in admin case resulted in
 "libvirt-libvirt-admin.conf.conf". Obviously, this non-existent config led to
 ignoring  all user settings in libvirt-admin.conf. This patch requires the
 config filename to be always provided as an argument with the concatenation
 being simplified.

 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357364Signed-off-by: NErik Skultety <eskultet@redhat.com>

Kimchi is a open-source interface to kvm. It runs with HTML5, simple and
easy to manage kvm guests.
Signed-off-by: NRamon Medeiros <ramonn@linux.vnet.ibm.com>

The function would generate a leading comma. Let the callers properly
add commas by formatting the commas at the end and trimming the trailing
one.

For use with memory hotplug virQEMUBuildCommandLineJSONRecurse attempted
to format JSON arrays as bitmap on the command line. Make the formatter
function configurable so that it can be reused with different syntaxes
of arrays such as numbered arrays for use with disk sources.

This patch extracts the code and adds a parameter for the function that
will allow to plug in different formatters.

Move the iterator of objects to the recursive function so that nested
objects are supported by flattening the structure with '.' delimiters.

Until now the JSON->commandline convertor was used only for objects
created by qemu. To allow reusing it with disk formatter we'll need to
escape ',' as usual in qemu commandlines.

Refactor the command line generator by adding a wrapper (with
documentation) that will handle the outermost object iteration.

This patch also renames the functions and tweaks the error message for
nested arrays to be more universal.

The new function is then reused to simplify qemucommandutiltest.

The iterator function (second argument) already requires that the object
is handled as 'const' thus we won't modify the object itself.

As we already test that the extraction of the backing store string works
well additional tests for the backing store string parser can be made
simpler.

Export virStorageSourceNewFromBackingAbsolute and use it to parse the
backing store strings, format them using virDomainDiskSourceFormat and
match them against expected XMLs.

Failure to parse a XML that was not supposed to fail would result into a
crash in the test suite as the vcpu bitmap would not be filled prior to
the active XML->XML test.

Skip formatting of the vcpu snippet in the fake status XML formatter in
such case to avoid the crash. The test would fail anyways.

Nothing in the code path after the removed call has needs/uses the alias
anyway (as would be the case for command line building or talking to monitor).
The alias is VIR_FREE'd in virDomainDeviceInfoClear which is called for any
device that needs/uses an alias via virDomainDeviceDefFree or virDomainDefFree
as well as during virDomainDeviceInfoFree for host devices.

For persistent domains, the domain definition (including aliases) gets
freed a few screens later when it's replaced with newDef.

For transient domains, the definition is freed/unref'd along with the
virDomainObj a few moments later.

Since commit id 'fb063500' these are no longer called, so remove them

Introduce initial support for domainBlockStats API call that
allow us to query block device statistics. OpenStack nova
uses this API call to query block statistics, alongside
virDomainMemoryStats and virDomainInterfaceStats.  Note that
this patch only introduces it for VBD for starters. QDisk
would come in a separate patch series.

A new statistics data structure is introduced to fit common
statistics among others specific to the underlying block
backends. For the VBD statistics on linux these are exported
via sysfs on the path:

"/sys/bus/xen-backend/devices/vbd-<domid>-<devid>/statistics"

To calculate the block devno libxlDiskPathToID is introduced.
Each backend implements its own function to extract statistics,
allowing support for multiple backends and different platforms.

VBD stats are exposed in reqs and number of sectors from
blkback, and it's up to us to convert it to sector sizes.
The sector size is gathered through xenstore in the device
backend entry "physical-sector-size".

BlockStatsFlags variant is also implemented which has the
added benefit of getting the number of flush requests.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

Purely cosmetic change to be consistent with the other names.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Not all objects have a uuid, such as nodedevs. When we add events
support for them, NULL will be passed here, so handle it.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1181539

QEMU reports timestamp along with other memory statistics, but this information is not saved into domain statistics.
It could be useful to determine if the data reported is fresh or not.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

'memtotal' in virtio drivers and qemu corresponds to 'available' in libvirt.
Because of that, 'stat-available-memory' is renamed into 'usable'.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

Dropping the caching of ccw address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.

Dropping the caching of ccw address set.
Instead of using the cached address set, functions in qemu_hotplug.c
now recalculate it on demand.

The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.

Add a function that calculates the ccw address set
from the domain definition.

Dropping the caching of virtio serial address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.

Credit goes to Cole Robinson.

Dropping the caching of virtio serial address set.
Instead of using the cached address set, a function in qemu_hotplug.c
now recalculates it on demand.

Credit goes to Cole Robinson.

The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.

Add a function that calculates the virtio serial address set
from the domain definition.

Credit goes to Cole Robinson.

Use virAsprintf to prepend an underscore to make the code more
readable.

The symbol being missing has been reported as causing build
failures on OS X. If it's not already defined, define it to
zero so that it won't have any effect.

Commit 4a585a88 introduced searching QOM device path by alias, let's use it for
memballoon too.  This may speedup the search because in most cases we will find
the correct QOM device path directly by using alias without the need for the
recursion code.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit ce745914 introduced detection of actual video ram sizes to fix migration
if QEMU decide to modify the values provided by libvirt.  This works perfectly
for domains with number of video devices up to two.

If there are more than two video devices in the guest all the secondary devices
in the XML will have the same memory values.  This is because our current code
search for QOM device path only by the device type name and all the secondary
video devices has the same name "qxl".

This patch introduces a new search function that will try to search a QOM device
path using also device's alias if the alias is available. After that it will
fallback to the old recursive code if the alias search found no results.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358728Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Previously, qemuDomainDetachDeviceFlags was doing two things:
handling the job and detaching devices. Now the second part is
in a new function.

This will make splitting up qemuDomainDetachDeviceFlags into two
functions easier.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Previously, qemuDomainAttachDeviceFlags was doing two things:
handling the job and attaching devices. Now the second part is
in a new function.

This change is required to make it possible to test more complex
device attachment situations, like attaching a device to both
config and live at once.

qemuCaps is no longer used anywhere in these functions,
so it can be deleted.

We want to be able to pass a NULL instead of the connection
and use this function in tests. To achieve this, the virConnectPtr
is passed instead of virDomainPtr, and the driver is a new separate
parameter.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>