When changing one of the src/libvirt-*.c files to alter the docs, the
adjusted files weren't being built.  Added them into APIBUILD_STAMP and
then added that to the html/index.html rule which is used for the
$(apihtml_generated) generated rule.

Also, for clean we can remove the html/*.html files

Remove a bunch of pages which are either outdated, have no
content, or duplicate content better described elsewhere
in the site or wiki.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A combination of the index page, top nav bar and docs.html page
provide links to all pages on the site. The left hand nav bar
is thus redundant and can be removed to provide a simpler style
for the site.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The todo page used to be auto-generated from bugzilla but is
no longer used.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Replace the old "Made with libvirt" logo with links to the
new "Libvirt powered" logos, providing various sizes.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Use a large logo banner across the front page. Tile the
three lists of links into three panels
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Use a dark banner whose color matches the dark green used in
the logo. Introduce a newly rendered version of the header
logo derived from new SVG file, instead of old one from
(now lost) Adobe Illustrator file.

The top banner logo now links to the front page as is common
practice for most websites.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add the SVG files for the libvirt logo, along with corresponding
pre-rendered PNG bitmaps at key sizes. Also add a README file
describing how to modify the logos and their intended usages.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This file requires three steps instead of two.
Move it earlier in the list of targets to avoid waiting for it.

Remove DOC_SOURCE_DIR, introduced by and
unused since commit b325d741.

PERL is already detected in configure.ac.

So, I've ran into very interesting problem lately. When doing the
following, I've encountered an error:

  libvirt.git $ make dist && tar -xJf libvirt-2.2.0.tar.xz && \
                cd libvirt-2.2.0 && ./configure && \
                rm docs/formatdomain.html && make -C docs

  make: Entering directory 'docs'
  make: *** No rule to make target 'formatdomain.html', needed by 'web'.  Stop.
  make: Leaving directory 'docs'

I had no idea what was going on, so I've nailed down the commit
that "broke it" via running git-bisect. It was this one:
7659bd92. But that shed no more light until I realized
that the commit might actually just exposed a problem we had. And
guess what - I've nailed it down. Of course we are not
distributing subsite.xsl that's why make prints error message.
Very misleading one I must say.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This patch enables admin socket creation in daemon's code, bumps the library
version in libvirt_admin_public.syms, and performs all necessary modifications
to our makefiles so that admin API can finally be included in the tarball,
and eventually become part of an rpm package (a patch later in this series).
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Since commit d195cffa, both $(srcdir) and $(abs_builddir)
are passed to the apibuild.py script; however, since the
former is a relative path and the latter an absolute one, the
script might not be able to detect whether they point to the
same location.

Pass both as relative paths to avoid the issue.

libvirt-common.h is generated into builddir/include/libvirt. apibuild.py
only operated on srcdir/inlcude/libvirt. With VPATH build
srcdir/docs/libvirt-libvirt-common.html would not get generated and make
RPM failed.

Since commit f5d9c5d0 moved the virTypedParam stuff into
libvirt-common we did not generate any docs for them and neither did we
populate them into libvirt-api.xml. This broke the sanity check in
libvirt python. Fix it by generating docs for libvirt-common.h too.

Our uninstall script is not exact counterpart of install one.
Therefore we are leaving couple of files behind. This should not
happen.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

While we could leave it behind as an indelible sign that libvirt
has been running on host, other users might not be that fond of
it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is long since obsolete, just scrap it all

Imagine you have partially installed libvirt, or maybe you're
just running 'make uninstall' from a different version than 'make
install' has been ran. One way or another, we are doing plain
'rm' instead of 'rm -f' and thus not trying hard enough when
uninstalling. In the rest of our code we stick with -f switch. Do
that for docs too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When generating docs in a VPATH build we get a failure to
create a file due to the 'internals' subdir not existing:

  Generating internals/locking.html.tmp
  /bin/sh: line 3: internals/locking.html.tmp: No such file or directory
  rm: cannot remove ‘internals/locking.html.tmp’: No such file or directory
  Makefile:2229: recipe for target 'internals/locking.html.tmp' failed
  make: *** [internals/locking.html.tmp] Error 1

For some reason, make has decided to run the target

  %.html.tmp: %.html.in site.xsl page.xsl sitemap.html.in $(acl_generated)

instead of the target

  internals/%.html.tmp: internals/%.html.in subsite.xsl page.xsl sitemap.html.in

Removing '$(acl_generated)' from the first target, inexplicably
causes make to now run the correct target for the internals/
files.

Rather than figure this out, lets just combine the two targets
into one.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

So after da176bf6 and friend we have switched to $(wildcard
some/path/*.xml) instead of enumerating the files explicitly.
This is nice, however it makes distcheck build from VPATH fail.
The reason is that it's is not obvious to what does the wildcard
refer to: srcdir or builddir?
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Move the logic to docs/Makefile.am, and simplify it with a wildcard
expression.

As it turned out, we need to share some enums and declarations between
libvirt.h and libvirt-admin.h, but since our policy forbids direct includes of
libvirt*.h, there has to be some header exempt from this rule. This patch moves
the relevant part of code from libvirt.h.in to libvirt-common.h.in. Moreover,
since there is no need to have libvirt.h generated anymore, introduce a new
header libvirt.h which was previosly ignored from git and make the common
header ignored and generated instead.

This reverts commit e5470dd0.

This has been ACK'd by the original author in the original mail thread:
https://www.redhat.com/archives/libvir-list/2015-September/msg00310.html

The reason to revert this is due to the patch breaking the generation of
internal subsites.  The original issue still needs to be dealt with,
though.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Double semicolons have special meaning in makefiles, but they would have
to be combined with other rules witch such separators in order to be
used as intended.  Since there are no other rules like that, let's
clean it up.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We're using the %.html.tmp for all html files now so drop the unused one
and rather make sure the needed directory exists.

This fixes build failures as described in

    https://www.redhat.com/archives/libvir-list/2015-August/msg00603.html

Don't listen on the admin socket in the daemon and comment out the
admin devel files out of specfile.

Library is still being compiled and installed in order to link easily
without any disturbing modifications to the daemon code.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In my previous fix (1310b135) I've tried to solve an ordering
issue.  Well, while it worked it has a side effect of keeping a
temporary file around. My patch was buggy in that sense. Solve
this by properly marking the dependency without any side effect.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The acl.html file includes aclperms.htmlinc which is generated.
However, acl.html is generated too from acl.html.tmp. And in fact,
this is the place where the aclperms file is needed. Fix the
dependency in Makefile.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

No online docs are build from it since it doesn't really fit into our
document structure and new page will need to be created for it, but this
is at least a heads-up commit for easier parsing in order to build some
documentation (or python bindings) later on.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In a lot places we use path like this:

  $(srcdir)/../src/....

when in fact it can be:

  $(top_srcdir)/src/
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

On a Debian system lacking the w3c-dtd-xhtml package the build fails
with:

        $ make -C docs/ formatcaps.html
        make: Entering directory '/local/scratch/ianc/devel/libvirt.git/docs'
        Generating formatcaps.html.tmp
        I/O error : Attempt to load network entity http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd
        formatcaps.html.in:2: warning: failed to load external entity "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"
        C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"
                                                                                       ^
        I/O error : Attempt to load network entity http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd
        ../docs/sitemap.html.in:2: warning: failed to load external entity "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"
        C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"
                                                                                       ^
        missing XHTML1 DTD
        rm formatcaps.html.tmp
        make: Leaving directory '/local/scratch/ianc/devel/libvirt.git/docs'
        $ ls docs/formatcaps*
        docs/formatcaps.html.in

https://www.redhat.com/archives/libvir-list/2009-November/msg00413.html
suggests that the XHTML1 DTD should not be a hard requirement and the
docs should be generated but not validated if it is not available.

Therefore when the DTD is not available arrange for the .html.tmp file
to be propagated to the .html output.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Daniel Veillard <veillard@redhat.com>

This changes the display from:

libvirt-storage: APIs for management of storages

to

libvirt-storage: APIs for management of storage pools and volumes

In making that change I expected my build tree html output to be
regenerated; however, it wasn't because the dependency for the separated
libvirt-storage.h wasn't there.  It was only present for libvirt.h.in

So I added each in the order displayed on the docs/html/index.html page

Make was not able to realize the dependencies for html/*.html files when
running 'make -j9 dist'.  All the files are generated together with
html/index.html, so simply separating them into another variable and
adding one block into the dependency chain solves the issue.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since libvirt.h was split into multiple files and similarly
docs/libvirt-libvirt.html, docs/hvsupport.html have bad hyperlinks.  The
same happens for all the html.in files that used <code class='docref'>
tag, because page.xsl has no idea where to point the link that's found.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The libvirt-libvirt.html file is no longer generated so
should not be referenced by the Makefile.am

The API docs generators were broken by the header file
re-organization. Specifically

 * html/libvirt-libvirt.html was empty (and should be deleted)
 * Makefile.am didn't install html/libvirt-libvirt-*.html
 * hvsupport.html was mostly empty
 * sitemap.html.in didn't list the new html/*.html files

The xml files are generated in build directory and thus docs/newapi.xsl
was not able to find them in a VPATH build.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

First make sure that the input is xhtml as the stylesheets expect
namespaced element, then use a span element instead of a as a
is treated specially, finally adjust the makefile to check for
the new span element and replace it with the PHP code