The session daemon is unable to set XATTRs in 'trusted'
namespace because it doesn't run as privileged process.
Therefore, when creating the default qemu config enable
rememberOwner only when running as privileged process.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Avoid building the same path several times.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Avoid building the same path several times.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Avoid building the same path several times.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

No need to have two conditional blocks.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Since its introduction in commit 0977b8aa (released in v1.2.14)
qemuAgentGetInterfaces calls qemuAgentCommand with needReply=false,
which allows qemuAgentCommand to return 0 even when it did not get
any reply from the agent.

Set needReply to true, since we dereference it right after.

This can be hit if libvirt is waiting for an event from the agent
(e.g. shutdown) and the agent cannot reply in time (e.g. due to
the guest being shut down), as reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=1663051Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Three lines are a bit off there.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

The use of 'lxc://' was mistakenly broken in:

  commit 4c8574c8
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Wed Mar 28 12:49:29 2018 +0100

    driver: ensure NULL URI isn't passed to drivers with whitelisted URIs

Allow it again for historical compatibility.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

In the previous commit we are using uint64_t for storing subnet
prefix and interface id that qemu reports in
RDMA_GID_STATUS_CHANGED event. We also report them in some debug
messages. This poses a problem because uint64_t can be UL or ULL
depending on the host architecture and hence we wouldn't know
which format to use. Switch to ULL which is big enough and
doesn't suffer from the issue.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This event is emitted on the monitor when a GID table in pvrdma device
is modified and the change needs to be propagate to the backend RDMA
device's GID table.

The control over the RDMA device's GID table is done by updating the
device's Ethernet function addresses.
Usually the first GID entry is determine by the MAC address, the second
by the first IPv6 address and the third by the IPv4 address. Other
entries can be added by adding more IP addresses. The opposite is the
same, i.e. whenever an address is removed, the corresponding GID entry
is removed.

The process is done by the network and RDMA stacks. Whenever an address
is added the ib_core driver is notified and calls the device driver's
add_gid function which in turn update the device.

To support this in pvrdma device we need to hook into the create_bind
and destroy_bind HW commands triggered by pvrdma driver in guest.
Whenever a changed is made to the pvrdma device's GID table a special
QMP messages is sent to be processed by libvirt to update the address of
the backend Ethernet device.
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

mingw lacks localtime_r(); we were getting it from gnulib. But since
commit acf522e8 stopped linking examples against gnulib, we are
getting a build failure. Keep the examples standalone, and work
around mingw by using the non-reentrant localtime() (safe since our
examples are single-threaded), and add a necessary exemption to our
syntax check.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

mingw lacks sigaction(); we were getting it from gnulib. But since
commit acf522e8 stopped linking examples against gnulib, we are
getting a build failure. Keep the examples standalone, and work
around mingw by using signal() instead.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

mingw lacks %lld and %zu support in printf(); we were getting it
from gnulib. But since commit acf522e8 stopped linking examples
against gnulib, we are getting a build failure due to -Wformat
flagging these strings. Keep the examples standalone, and work
around mingw by using manual casts to types we can portably print.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The check was concerning itself with whitespace where it
didn't need to, and used some confusing escaping for one
of its regular expressions - which GNU sed was fine with,
but FreeBSD's sed didn't like one bit.

Switch to extended regular expressions (which, incidentally,
were already in use in the same rule when calling grep) and
remove all whitespace handling.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

These were not caught by our current regular expressions
but will be caught by the improved ones we're about to
introduce, so fix them ahead of time.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commit 0c6ad476 updated gnulib, which rearranged some of the
conditions in gnulib wrapper headers such that compilation
started failing on BSD systems when the normal system <unistd.h>
tried to include another system header but instead got a
gnulib wrapper header in an incomplete state; this is because
gnulib headers only work if <config.h> is included first.

Commit b6f78259 papered over the symptoms of that by including
<config.h> in all the examples.  But this logic is backwards -
if our examples are truly meant to be stand-alone, they should
NOT depend on how libvirt was configured, and should NOT
depend on the gnulib fixes for system quirks.  In particular,
if an example does not need to link against libgnulib.la,
then it also does not need to use -Ignulib in its compile
flags, and likewise does not need to include <config.h> since
none of the gnulib wrapper headers should be interfering.

So, revert (most of) b6f78259 (except for the bogus pre-patch
use of "config.h" in admin/logging.c: if config.h is included,
it should be via <> rather than "", and must be before any
system headers); then additionally nuke all mention of
<config.h>, -Ignulib, and -llibgnu.la, making all of the
examples truly standalone.
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Pulling in gnulib just for the <verify.h> header is rather
expensive, especially since that header does not require us
to link against gnulib.  It's better to make the event-test
example be standalone by just open-coding a more limited form
of a verify() macro that depends on modern gcc (we have enough
CI coverage that even though the verify is now a no-op in
older setups, we will still notice if we fail to add an event
- as a quick test, I was still able to provoke a compile
failure on Fedora 29 when deleting a line from domainEvents).
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Essentially, bring back the old behaviour as of commit eba36a38 which
was later changed by commit ae06048b. Even though all the stderr
messages will eventually end up in the journal, we're not making use of
the fields journald provides.

https://bugzilla.redhat.com/show_bug.cgi?id=1592644Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

In a VPATH build, <config.h> is in the builddir (which automake
includes automatically), but it includes <config-post.h> from the
top source directory (which is not automatic); hence, we need to
keep the -I(top_srcdir) directive that was accidentally removed
from commit 7a879323 (the problem is not visible in an in-tree
build).
Signed-off-by: NEric Blake <eblake@redhat.com>

Our use of INCLUDES in Makefile.am hearkens back to when we had to
cater to automake 1.9.6 (thanks, RHEL 5) which lacked AM_CPPFLAGS.
Modern Automake flags a warning that INCLUDES is deprecated, and
now that we mandate RHEL 7 or better (see commit c1bc9c66), we no
longer have to cater to the old spelling.  This change will also
make it easier to do per-binary CPPFLAGS.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commit c0a8ea45 removed the use of gettextize, and the setting of
GETTEXT_CPPFLAGS, but did not scrub the now-unused variable from
Makefile.am snippets.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Similar to the gnulib changes we just incorporated into maint.mk,
it's time to use '$(VC_LIST) | xargs program' instead of
'program $$($(VC_LIST))', in order to bypass the problem of hitting
argv limits due to our large set of files.

Drop several uses of $$files as a temporary variable when we can
instead directly use xargs. While at it, fix a typo in the
prohibit_windows_special_chars error message.

Note that 'grep $pattern $(generate list)' has be be rewritten
as 'generate list | xargs grep $pattern /dev/null' - this is
because for a list that is just long enough, and without /dev/null,
xargs could make a worst-case split of 'grep $pattern all but one;
grep $pattern last' which has different output (grep includes the
filename when there was more than one file, but omits it for a
single file), while our conversion gives 'grep $pattern /dev/null
all but one; grep $pattern /dev/null last'. We are less concerned
about the empty list case (why would we run the syntax check if we
didn't have at least one file?), but grepping /dev/null happens to
produce no output and thus nicely also solves that problem without
relying on the GNU extension of 'xargs -r'.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We already used $(GREP) in some places, but might as well use it
everywhere during syntax check, in line with similar recent gnulib
changes.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In particular, this incorporates Roman's patches to allow
'make syntax-check' to work on BSD with its exec argv
limitations that previously failed when trying to grep the
large number of files present in libvirt.

cfg.mk needs similar changes, but that will be tackled separately.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This feature is introduced by 3f4914e0.
Signed-off-by: NHan Han <hhan@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This feature is in since eb1b551d.
Signed-off-by: NHan Han <hhan@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Since gnulib commit 6954995d unistd.h is included via stdlib.h
on BSD systems, which requires config.h to be included first.

Add config.h to the files that use it.

Part of this commit reverts commit 6ee918deSigned-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Lead by example in examples/
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NEric Blake <eblake@redhat.com>

Currently, all of the VirtioOptions are under a single <optional>
element, however, neither our parser/formatter or QEMU driver requires
the presence of all the options if only a single one from the set has
been specified, so fix it and silence the schema validator.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In 60046283 we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Add more configure options for NVDIMM
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

According to the result parsing from xml, add the unarmed property
into QEMU command line:

-device nvdimm,...[,unarmed=on]
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

According to the result parsing from xml, add pmem property
into QEMU command line:

-object memory-backend-file,...[,pmem=on]
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

According to the result parsing from xml, add align property
into QEMU command line:

-object memory-backend-file,...[,align=xxx]
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Deprecate DO_TEST to do nvdimm qemuxml2argvdata tests, because
DO_TEST_CAPS_LATEST is a better choice. The DO_TEST needs
to specify all qemu capabilities and is not easy for scaling.
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This capability tracks if nvdimm has the unarmed attribute or not
for the nvdimm readonly xml attribute.
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This capability tracks if memory-backend-file has the pmem
attribute or not.
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This capability tracks if memory-backend-file has the align
attribute or not.
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The 'readonly' option allows users to mark vNVDIMM read-only:

<devices>
  ...
  <memory model='nvdimm' access='shared'>
      <source>
          <path>/dev/dax0.0</path>
      </source>
      <target>
          <size unit='MiB'>4094</size>
          <node>0</node>
          <label>
              <size unit='MiB'>2</size>
          </label>
          <readonly/>
      </target>
  </memory>
  ...
</devices>
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>