- 05 12月, 2017 1 次提交
-
-
由 Michal Privoznik 提交于
These XMLs live in a separate directory, there's no need for them to have a special prefix in addition. It also doesn't play nicely with ':e' completion in Vim, finding proper file based on qemuxml2argvtest.c is also needlessly complicated. The files were renamed using the following commands. From qemuxml2argvdata: for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done and then (to fix broken symlinks) from qemuxml2argvdata and qemuxml2xmloutdata: for i in $(find . -xtype l); do \ ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i; done Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 11 4月, 2017 1 次提交
-
-
由 Pavel Hrdina 提交于
Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 11 2月, 2015 2 次提交
-
-
由 Erik Skultety 提交于
Parser checks for per-domain seclabel duplicates, so it would be nice if it checked for per-device seclabel duplicates the same way Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165485
-
由 Erik Skultety 提交于
In our RNG schema we do allow multiple (different) seclabels per-domain, but don't allow this for devices, yet we neither have a check in our XML parser, nor in a post-parse callback. In that case we should allow multiple (different) seclabels for devices as well.
-
- 21 8月, 2013 1 次提交
-
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=924153 Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with an attribute relabel='no' in order to try and minimize the impact of shutdown delays when an NFS server disappears. The idea was that if a disk is on NFS and can't be labeled in the first place, there is no need to attempt the (no-op) relabel on domain shutdown. Unfortunately, the way this was implemented was by modifying the domain XML so that the optimization would survive libvirtd restart, but in a way that is indistinguishable from an explicit user setting. Furthermore, once the setting is turned on, libvirt avoids attempts at labeling, even for operations like snapshot or blockcopy where the chain is being extended or pivoted onto non-NFS, where SELinux labeling is once again possible. As a result, it was impossible to do a blockcopy to pivot from an NFS image file onto a local file. The solution is to separate the semantics of a chain that must not be labeled (which the user can set even on persistent domains) vs. the optimization of not attempting a relabel on cleanup (a live-only annotation), and using only the user's explicit notation rather than the optimization as the decision on whether to skip a label attempt in the first place. When upgrading an older libvirtd to a newer, an NFS volume will still attempt the relabel; but as the avoidance of a relabel was only an optimization, this shouldn't cause any problems. In the ideal future, libvirt will eventually have XML describing EVERY file in the backing chain, with each file having a separate <seclabel> element. At that point, libvirt will be able to track more closely which files need a relabel attempt at shutdown. But until we reach that point, the single <seclabel> for the entire <disk> chain is treated as a hint - when a chain has only one file, then we know it is accurate; but if the chain has more than one file, we have to attempt relabel in spite of the attribute, in case part of the chain is local and SELinux mattered for that portion of the chain. * src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new member. * src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML): Parse it, for live images only. (virSecurityDeviceLabelDefFormat): Output it. (virDomainDiskDefParseXML, virDomainChrSourceDefParseXML) (virDomainDiskSourceDefFormat, virDomainChrDefFormat) (virDomainDiskDefFormat): Pass flags on through. * src/security/security_selinux.c (virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip when possible. (virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not norelabel, if labeling fails. (virSecuritySELinuxSetFileconHelper): Fix indentation. * docs/formatdomain.html.in (seclabel): Document new xml. * docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG. * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml: * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args: * tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml: New test files. * tests/qemuxml2argvtest.c (mymain): Run the new tests. * tests/qemuxml2xmltest.c (mymain): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 25 4月, 2013 1 次提交
-
-
由 Ján Tomko 提交于
<controller type='pci' index='0' model='pci-root'/> is auto-added to pc* machine types. Without this controller PCI bus 0 is not available and no PCI addresses are assigned by default. Since older libvirt supported PCI bus 0 even without this controller, it is removed from the XML when migrating.
-
- 15 3月, 2012 1 次提交
-
-
由 Osier Yang 提交于
numad is an user-level daemon that monitors NUMA topology and processes resource consumption to facilitate good NUMA resource alignment of applications/virtual machines to improve performance and minimize cost of remote memory latencies. It provides a pre-placement advisory interface, so significant processes can be pre-bound to nodes with sufficient available resources. More details: http://fedoraproject.org/wiki/Features/numad "numad -w ncpus:memory_amount" is the advisory interface numad provides currently. This patch add the support by introducing a new XML attribute for <vcpu>. e.g. <vcpu placement="auto">4</vcpu> <vcpu placement="static" cpuset="1-10^6">4</vcpu> The returned advisory nodeset from numad will be printed in domain's dumped XML. e.g. <vcpu placement="auto" cpuset="1-10^6">4</vcpu> If placement is "auto", the number of vcpus and the current memory amount specified in domain XML will be used for numad command line (numad uses MB for memory amount): numad -w $num_of_vcpus:$current_memory_amount / 1024 The advisory nodeset returned from numad will be used to set domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity). If the user specifies both CPU affinity policy (e.g. (<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto" the specified CPU affinity will be overridden. Only QEMU/KVM drivers support it now. See docs update in patch for more details.
-
- 08 3月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
-
- 28 2月, 2012 1 次提交
-
-
由 Osier Yang 提交于
* src/conf/domain_conf.h: Add new member "target" to struct _virDomainDeviceDriveAddress. * src/conf/domain_conf.c: Parse and format "target" * Lots of tests (.xml) in tests/domainsnapshotxml2xmlout, tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and tests/vmx2xmldata/ are modified for newly introduced attribute "target" for address of "drive" type.
-
- 10 2月, 2012 1 次提交
-
-
由 Marc-André Lureau 提交于
Some tools, such as virt-manager, prefers having the default USB controller explicit in the XML document. This patch makes sure there is one. With this patch, it is now possible to switch from USB1 to USB2 from the release 0.9.1 of virt-manager. Fix tests to pass with this change.
-
- 30 12月, 2011 1 次提交
-
-
由 Eric Blake 提交于
The RNG for <seclabel> was too strict - if it was present, then it had to have sub-elements, even if those didn't make sense for the given attributes. Also, we didn't have any tests of <seclabel> parsing or XML output. In this patch, I added more parsing tests than output tests (since the output populates and/or reorders fields not present in certain inputs). Making the RNG reliable is a precursor to using <seclabel> variants in more places in the XML in later patches. See also: http://berrange.com/posts/2011/09/29/two-small-improvements-to-svirt-guest-configuration-flexibility-with-kvmlibvirt/ * docs/schemas/domaincommon.rng (seclabel): Tighten rules. * tests/qemuxml2argvtest.c (mymain): New tests. * tests/qemuxml2xmltest.c (mymain): Likewise. * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*.*: New files.
-
- 29 1月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
Use it in all places where a memory or storage request size is converted to a larger granularity. This avoids requesting too small memory or storage sizes that could result from the truncation done by a simple division. This extends the round up fix in 6002e040 to the whole codebase. Instead of reporting errors for odd values in the VMX code round them up. Update the QEMU Argv tests accordingly as the original memory size 219200 isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change it to 219100 and 219136. Use two different values intentionally to make sure that rounding up works. Update virsh.pod accordingly, as rounding down and rejecting are replaced by rounding up.
-
- 21 7月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To allow compatibility with older QEMU PCI device slot assignment it is necessary to explicitly track the balloon device in the XML. This introduces a new device <memballoon model='virtio|xen'/> It can also have a PCI address, auto-assigned if necessary. The memballoon will be automatically added to all Xen and QEMU guests by default. * docs/schemas/domain.rng: Add <memballoon> element * src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and formatting for memballoon device. Always add a memory balloon device to Xen/QEMU if none exists in XML * src/libvirt_private.syms: Export memballoon model APIs * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the PCI device address in memory balloon device * tests/*: Update to test new functionality
-
- 18 1月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Existing applications using libvirt are not aware of the disk controller concept. Thus, after parsing the <disk> definitions in the XML, it is neccessary to create <controller> elements to satisfy all requested disks, as per their defined drive addresses * src/conf/domain_conf.c, src/conf/domain_conf.h, src/libvirt_private.syms: Add virDomainDefAddDiskControllers() method for populating disk controllers, and call it after parsing disk definitions. * src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers() when doing ARGV -> XML conversion * tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller data to all data files which don't have it already
-
- 16 1月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
When parsing the <disk> element specification, if no <address> is provided for the disk, then automatically assign one based on the <target dev='sdXX'/> device name. This provides for backwards compatability with existing applications using libvirt, while also allowing new apps to have complete fine grained control. * src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms: Add virDomainDiskDefAssignAddress() for assigning a controller/bus/unit address based on disk target * src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after generating XML from ARGV * tests/qemuxml2argvdata/*.xml: Add in drive address information to all XML files
-
- 23 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 10 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 19 7月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-