These XMLs live in a separate directory, there's no need for them
to have a special prefix in addition. It also doesn't play nicely
with ':e' completion in Vim, finding proper file based on
qemuxml2argvtest.c is also needlessly complicated.

The files were renamed using the following commands. From
qemuxml2argvdata:

  for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done

and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:

  for i in $(find . -xtype l); do \
      ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
  done
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Noticed the following denial in audit.log when shutting down
an apparmor confined domain

type=AVC msg=audit(1512002299.742:131): apparmor="DENIED"
operation="open" profile="libvirt-66154842-e926-4f92-92f0-1c1bf61dd1ff"
name="/proc/1475/cmdline" pid=2958 comm="qemu-system-x86"
requested_mask="r" denied_mask="r" fsuid=469 ouid=0

Squelch the denial by allowing read access to /proc/<pid>/cmdline.

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Commit id '74119a03' neglected to clean up @distances when
the numa definition is cleaned up.

Don't use a unary comparison for an int value - compare against zero
directly instead.

Clean up the style a bit w/r/t to not using a unary operator on an
integer value that could be zero - compare vs. zero instead.

Set the def->mem_nodes[*].distances to rdist or ldist inside the
if condition - no need to set outside since the value being set
to is what was fetched.

During cleanup, be sure to initialize the ndistances on error and
use the < 0 comparison not the unary one.

==899== 39 bytes in 1 blocks are definitely lost in loss record 732 of 1,003
==899==    at 0x4C2AEDF: malloc (vg_replace_malloc.c:299)
==899==    by 0x8B68CE7: vasprintf (in /lib64/libc-2.25.so)
==899==    by 0x55498D2: virVasprintfInternal (virstring.c:708)
==899==    by 0x55499E7: virAsprintfInternal (virstring.c:729)
==899==    by 0x2BECFFF0: qemuGetMemoryBackingBasePath (qemu_conf.c:1757)
==899==    by 0x2BF23225: qemuStateInitialize (qemu_driver.c:893)
==899==    by 0x563073D: virStateInitialize (libvirt.c:770)
==899==    by 0x124CC4: daemonRunStateInit (libvirtd.c:834)
==899==    by 0x55521CD: virThreadHelper (virthread.c:206)
==899==    by 0x88D9686: start_thread (in /lib64/libpthread-2.25.so)
==899==    by 0x8BEAEFE: clone (in /lib64/libc-2.25.so)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

==1277== 8 bytes in 4 blocks are definitely lost in loss record 39 of 131
==1277==    at 0x4C2AEDF: malloc (vg_replace_malloc.c:299)
==1277==    by 0x68BBBC8: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==1277==    by 0x53B1DC2: virXMLPropString (virxml.c:510)
==1277==    by 0x53D696A: virDomainDiskBackingStoreParse (domain_conf.c:8639)
==1277==    by 0x53DA684: virDomainDiskDefParseXML (domain_conf.c:9590)
==1277==    by 0x53F619F: virDomainDefParseXML (domain_conf.c:19233)
==1277==    by 0x53F96EE: virDomainDefParseNode (domain_conf.c:20083)
==1277==    by 0x53F9540: virDomainDefParse (domain_conf.c:20027)
==1277==    by 0x53F95E6: virDomainDefParseFile (domain_conf.c:20053)
==1277==    by 0x44D1D4: testCompareDomXML2XMLFiles (testutils.c:1265)
==1277==    by 0x42FC7C: testXML2XMLActive (qemuxml2xmltest.c:71)
==1277==    by 0x44AD20: virTestRun (testutils.c:180)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

==861== 3 bytes in 1 blocks are definitely lost in loss record 3 of 168
==861==    at 0x4C2AEDF: malloc (vg_replace_malloc.c:299)
==861==    by 0x8C7FBC8: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==861==    by 0x5DCCDC2: virXMLPropString (virxml.c:510)
==861==    by 0x5DF1232: virDomainDiskSourceNetworkParse (domain_conf.c:8445)
==861==    by 0x5DF1728: virDomainDiskSourceParse (domain_conf.c:8576)
==861==    by 0x5DF41A5: virDomainDiskDefParseXML (domain_conf.c:9238)
==861==    by 0x5E1119F: virDomainDefParseXML (domain_conf.c:19233)
==861==    by 0x5E146EE: virDomainDefParseNode (domain_conf.c:20083)
==861==    by 0x5E14540: virDomainDefParse (domain_conf.c:20027)
==861==    by 0x5E145E6: virDomainDefParseFile (domain_conf.c:20053)
==861==    by 0x4053CC: testCompareXMLToArgv (qemuxml2argvtest.c:455)
==861==    by 0x41F135: virTestRun (testutils.c:180)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Raw local files do not pass through the backing store detector and thus
the code did not allocate the required backing store terminator for
them. Previously the terminating element would be formatted into the XML
since the default values used for the metadata allowed that. This is a
regression since a693fdba which was not detected in the review.

This patch also reverts all the changes in the test files.

Until now we would skip loading of the backing chain for files which
don't support backing chains only when starting up the VM. Move the
check from qemuProcessPrepareHostStorage with some adaptations so that's
always applied.

Split out clearing of the backing chain prior to other code since it
will be required later and optimize few layers of nested conditions and
loops.

The graphics code is complex and there are a lot of exceptions and
backward compatible combinations.  One of them is the possibility
to configure "spice_auto_unix_socket" in qemu.conf which will convert
all spice graphics with listen type "address" without any address
specified to listen type "socket" when the guest is started.

We don't format this generated socket into migratable XML to make
migration work with older libvirt.  However, spice has another
exception that if autoport='no' and there is no port configured
it is converted to listen type "none".  Because of this we need
to format autoport='yes' to make sure that the listen type will
be the same as the offline XML.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511407Reviewed-by: NJiri Denemark <jdenemar@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

In status XML, we do not store the QEMU version information, we only
format all the capabilities. We dropped QEMU_CAPS_PCI_MULTIBUS
in commit 5b783379 which was released in libvirt 3.2.0.

Therefore the only way of telling if the already running domain
at the time of daemon restart has been started with a QEMU that does
use 'pci.0' or not on PPC is to look at the pci-root controller's
alias. This is not an option if the domain has a user-specified alias
for the pci-root.

Instead of reintroducing the capability, assume 'pci.0' when we have
no version information. That way the only left broken use case would
be the combination of user aliases and very old QEMU.

Partially reverts commit 3a37af1e.

https://bugzilla.redhat.com/show_bug.cgi?id=1518148

We do not fill out qemuCaps->arch when parsing status XML.

Use def->os.arch like we do for PPC.

This fixes hotplug after daemon restart for domains that use
a user alias for the implicit pci-root on x86.

https://bugzilla.redhat.com/show_bug.cgi?id=1518148

For some corner cases, virQEMUCapsHasPCIMultiBus depends on the QEMU
version, which is by design not stored in the status XML and therefore
it cannot be fixed for all existing running domains.

Prefer the controller alias read from the status XML when formatting
PCI addresses and only fall back to using virQEMUCapsHasPCIMultiBus
if the alias is a user alias.

This fixes hotplug after daemon restart for domains not using user
aliases.

Partially reverts commit 937f3195.

https://bugzilla.redhat.com/show_bug.cgi?id=1518148

Allow parts of code outside domain_conf to decide whether the alias
is user-specified or not.

The 'wiremode' attribute exists in a couple of Xen XML files, but no code has
ever parsed that value. It was later added to the RNG schema too, again despite
there not being any code which parses it.
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libxlxml2domconfigdata directory was not covered in the RNG schema
tests. This hid a few bugs in both the libxl XML files and the RNG
schema itself.
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Adjust function descriptions of virQEMUCapsInitCPUModelS390 and
virQEMUCapsInitCPUModel to the changes introduced with
commitID 74fc32a9.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If the spec file applies a patch which touches any file in the API XMLs
dependency tree, we need to regenerate the XMLs and consequently
recreate hvsupport.html. The file will contain a time stamp in a comment
which means it will be different every time the package is built. The
commit a54c9622 which added the time stamp also added support for
SOURCE_DATE_EPOCH environment variable. Let's set it to the time stamp
of the spec file itself to make the build reproducible.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPino Toscano <ptoscano@redhat.com>

When building a package in a build system, such as koji or cbs, logs are
the only thing which can be used to diagnose failures. Make them verbose
since human friendly output of V=0 build doesn't really help when a
build fails.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPino Toscano <ptoscano@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Even though we never format the device on the QEMU command line,
as it's a platform serial device that's not user-instantiable,
we should still make sure it's available before using it.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

All serial devices shoule have an associated capability.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

We should make sure the isa-serial device is available before
formatting it on the QEMU command line.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

All serial devices shoule have an associated capability.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Now that <serial> and <console> on s390/s390x behave a bit more like the
other architectures, remove this extra differentation, and use sclp
console by default for new guests.  New virtio consoles can still be
added, and it is actually needed because of the limited number of
instances for sclp and sclplm.

This reverts commit b1c88c14, whose
reasons are not totally clear.
Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.

This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.

We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

The existing implementation set the address type for all serial
devices to spapr-vio, which made it impossible to use other devices
such as usb-serial and pci-serial; moreover, some decisions were
made based on the address type rather than the device type.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1512934Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.

We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.

This commit is best viewed with 'git show -w'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Instead duplicating the capability check for each possible target
model, introduce a small helper that matches the target model with
the corresponding capability and collapse all existing checks into
a single one.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Now that we've created a distinction between target type and target
model, with the latter being the concrete device name, it's time to
switch to formatting the model instead of the type.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Target model and target type must agree for the configuration
to make sense, so check that's actually the case and error out
otherwise.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

This information will be used to select, and store in the guest
configuration in order to guarantee ABI stability, the concrete
(hypervisor-specific) model for serial devices.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Instead of validating each target type / address type combination
separately, create a small helper to perform the matching and
collapse all existing checks into a single one.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>