These XMLs live in a separate directory, there's no need for them
to have a special prefix in addition. It also doesn't play nicely
with ':e' completion in Vim, finding proper file based on
qemuxml2argvtest.c is also needlessly complicated.

The files were renamed using the following commands. From
qemuxml2argvdata:

  for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done

and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:

  for i in $(find . -xtype l); do \
      ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
  done
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The current code was a little bit odd.  At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description.  That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.

This seems to me as a lot of code for nothing.  This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.

The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.

There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device.  This applies also to XEN hypervisor.  VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.

Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.

<vcpu> is not an optional node. The value for its 'placement'
actually always defaults to 'static' in the underlying codes.
(Even no 'cpuset' and 'placement' is specified, the domain
process will be pinned to all the available pCPUs).

Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.

* src/conf/domain_conf.h: Add new member "target" to struct
  _virDomainDeviceDriveAddress.

* src/conf/domain_conf.c: Parse and format "target"

* Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
  tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
  tests/vmx2xmldata/ are modified for newly introduced
  attribute "target" for address of "drive" type.

Some tools, such as virt-manager, prefers having the default USB
controller explicit in the XML document. This patch makes sure there
is one. With this patch, it is now possible to switch from USB1 to
USB2 from the release 0.9.1 of virt-manager.

Fix tests to pass with this change.

This patch addresses: https://bugzilla.redhat.com/show_bug.cgi?id=781562

Along with the "rombar" option that controls whether or not a boot rom
is made visible to the guest, qemu also has a "romfile" option that
allows specifying a binary file to present as the ROM BIOS of any
emulated or passthrough PCI device. This patch adds support for
specifying romfile to both passthrough PCI devices, and emulated
network devices that attach to the guest's PCI bus (just about
everything other than ne2k_isa).

One example of the usefulness of this option is described in the
bugzilla report: 82576 sriov network adapters don't provide a ROM BIOS
for the cards virtual functions (VF), but an image of such a ROM is
available, and with this ROM visible to the guest, it can PXE boot.

In libvirt's xml, the new option is configured like this:

   <hostdev>
     ...
     <rom file='/etc/fake/boot.bin'/>
     ...
   </hostdev

(similarly for <interface>).

When support for the rombar option was added, it was only added for
PCI passthrough devices, configured with <hostdev>. The same option is
available for any network device that is attached to the guest's PCI
bus. This patch allows setting rombar for any PCI network device type.

After adding cases to test this to qemuxml2argv-hostdev-pci-rombar.*,
I decided to rename those files (to qemuxml2argv-pci-rom.*) to more
accurately reflect the additional tests, and also noticed that up to
now we've only been performing a domainschematest for that case, so I
added the "pci-rom" test to both qemuxml2argv and qemuxml2xml (and in
the process found some bugs whose fixes I squashed into previous
commits of this series).

This patch was made in response to:

  https://bugzilla.redhat.com/show_bug.cgi?id=738095

In short, qemu's default for the rombar setting (which makes the
firmware ROM of a PCI device visible/not on the guest) was previously
0 (not visible), but they recently changed the default to 1
(visible). Unfortunately, there are some PCI devices that fail in the
guest when rombar is 1, so the setting must be exposed in libvirt to
prevent a regression in behavior (it will still require explicitly
setting <rom bar='off'/> in the guest XML).

rombar is forced on/off by adding:

  <rom bar='on|off'/>

inside a <hostdev> element that defines a PCI device. It is currently
ignored for all other types of devices.

At the moment there is no clean method to determine whether or not the
rombar option is supported by QEMU - this patch uses the advice of a
QEMU developer to assume support for qemu-0.12+. There is currently a
patch in the works to put this information in the output of "qemu-kvm
-device pci-assign,?", but of course if we switch to keying off that,
we would lose support for setting rombar on all the versions of qemu
between 0.12 and whatever version gets that patch.

Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.

This extends the round up fix in 6002e040
to the whole codebase.

Instead of reporting errors for odd values in the VMX code round them up.

Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.

Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.

To allow compatibility with older QEMU PCI device slot assignment
it is necessary to explicitly track the balloon device in the
XML. This introduces a new device

   <memballoon model='virtio|xen'/>

It can also have a PCI address, auto-assigned if necessary.

The memballoon will be automatically added to all Xen and QEMU
guests by default.

* docs/schemas/domain.rng: Add <memballoon> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
  and formatting for memballoon device. Always add a memory
  balloon device to Xen/QEMU if none exists in XML
* src/libvirt_private.syms: Export memballoon model APIs
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
  PCI device address in memory balloon device
* tests/*: Update to test new functionality

The old syntax is

  -pcidevice host=BUS:SLOT:FUNCTION

The new syntax is

  -device pci-assign,host=BUS:SLOT:FUNCTION,addr=<PCI SLOT>,id=host0

Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
  method for populating disk controllers, and call it after
  parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
  when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
  data to all data files which don't have it already

When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.

* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
  for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
  generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
  to all XML files

* docs/schemas/domain.rng src/domain_conf.c src/domain_conf.h
  src/qemu_conf.c
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml:
  adds a new <hostdev managed='(yes|no)'> property
  to host devices indicating whether or not we should
  automatically dettach/reset, patch by Mark McLoughlin
daniel

* docs/formatdomain.html.in docs/libvirt.rng docs/formatdomain.html:
  document the new PCI passthrough format
* tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml:
  and add a regression test for it.
Daniel

* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
  src/qemu_driver.c: Patch from Guido Günther allowing to pass
  usb devices to qemu/kvm
* docs/libvirt.rng: add the new functionality to the grammar
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml
  tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: adding examples
  to the regression tests
* libvirt.spec.in: fix the licence tag
Daniel