- 05 12月, 2017 1 次提交
-
-
由 Michal Privoznik 提交于
These XMLs live in a separate directory, there's no need for them to have a special prefix in addition. It also doesn't play nicely with ':e' completion in Vim, finding proper file based on qemuxml2argvtest.c is also needlessly complicated. The files were renamed using the following commands. From qemuxml2argvdata: for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done and then (to fix broken symlinks) from qemuxml2argvdata and qemuxml2xmloutdata: for i in $(find . -xtype l); do \ ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i; done Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 11 4月, 2017 1 次提交
-
-
由 Pavel Hrdina 提交于
Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 06 10月, 2015 1 次提交
-
-
由 Peter Krempa 提交于
Our docs state that subelements of <metadata> shall have a namespace and the medatata APIs expect that too. To avoid inaccessible <metadata> sub-elements, just remove those that don't conform to the documentation. Apart from adding the new condition this patch renames the function and refactors the code flow to allow the changes. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1245525
-
- 05 3月, 2015 1 次提交
-
-
由 Peter Krempa 提交于
Since the APIs support just one element per namespace and while modifying an element all duplicates would be removed, let's do this right away in the post parse callback. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1190590
-
- 15 3月, 2012 1 次提交
-
-
由 Osier Yang 提交于
numad is an user-level daemon that monitors NUMA topology and processes resource consumption to facilitate good NUMA resource alignment of applications/virtual machines to improve performance and minimize cost of remote memory latencies. It provides a pre-placement advisory interface, so significant processes can be pre-bound to nodes with sufficient available resources. More details: http://fedoraproject.org/wiki/Features/numad "numad -w ncpus:memory_amount" is the advisory interface numad provides currently. This patch add the support by introducing a new XML attribute for <vcpu>. e.g. <vcpu placement="auto">4</vcpu> <vcpu placement="static" cpuset="1-10^6">4</vcpu> The returned advisory nodeset from numad will be printed in domain's dumped XML. e.g. <vcpu placement="auto" cpuset="1-10^6">4</vcpu> If placement is "auto", the number of vcpus and the current memory amount specified in domain XML will be used for numad command line (numad uses MB for memory amount): numad -w $num_of_vcpus:$current_memory_amount / 1024 The advisory nodeset returned from numad will be used to set domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity). If the user specifies both CPU affinity policy (e.g. (<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto" the specified CPU affinity will be overridden. Only QEMU/KVM drivers support it now. See docs update in patch for more details.
-
- 08 3月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
-
- 28 2月, 2012 1 次提交
-
-
由 Osier Yang 提交于
* src/conf/domain_conf.h: Add new member "target" to struct _virDomainDeviceDriveAddress. * src/conf/domain_conf.c: Parse and format "target" * Lots of tests (.xml) in tests/domainsnapshotxml2xmlout, tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and tests/vmx2xmldata/ are modified for newly introduced attribute "target" for address of "drive" type.
-
- 25 1月, 2012 1 次提交
-
-
由 Zeeshan Ali (Khattak) 提交于
Applications can now insert custom nodes and hierarchies into domain configuration XML. Although currently not enforced, applications are required to use their own namespaces on every custom node they insert, with only one top-level element per namespace.
-
- 29 1月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
Use it in all places where a memory or storage request size is converted to a larger granularity. This avoids requesting too small memory or storage sizes that could result from the truncation done by a simple division. This extends the round up fix in 6002e040 to the whole codebase. Instead of reporting errors for odd values in the VMX code round them up. Update the QEMU Argv tests accordingly as the original memory size 219200 isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change it to 219100 and 219136. Use two different values intentionally to make sure that rounding up works. Update virsh.pod accordingly, as rounding down and rejecting are replaced by rounding up.
-
- 21 7月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To allow compatibility with older QEMU PCI device slot assignment it is necessary to explicitly track the balloon device in the XML. This introduces a new device <memballoon model='virtio|xen'/> It can also have a PCI address, auto-assigned if necessary. The memballoon will be automatically added to all Xen and QEMU guests by default. * docs/schemas/domain.rng: Add <memballoon> element * src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and formatting for memballoon device. Always add a memory balloon device to Xen/QEMU if none exists in XML * src/libvirt_private.syms: Export memballoon model APIs * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the PCI device address in memory balloon device * tests/*: Update to test new functionality
-
- 18 1月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Existing applications using libvirt are not aware of the disk controller concept. Thus, after parsing the <disk> definitions in the XML, it is neccessary to create <controller> elements to satisfy all requested disks, as per their defined drive addresses * src/conf/domain_conf.c, src/conf/domain_conf.h, src/libvirt_private.syms: Add virDomainDefAddDiskControllers() method for populating disk controllers, and call it after parsing disk definitions. * src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers() when doing ARGV -> XML conversion * tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller data to all data files which don't have it already
-
- 16 1月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
When parsing the <disk> element specification, if no <address> is provided for the disk, then automatically assign one based on the <target dev='sdXX'/> device name. This provides for backwards compatability with existing applications using libvirt, while also allowing new apps to have complete fine grained control. * src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms: Add virDomainDiskDefAssignAddress() for assigning a controller/bus/unit address based on disk target * src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after generating XML from ARGV * tests/qemuxml2argvdata/*.xml: Add in drive address information to all XML files
-
- 05 11月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
-
- 23 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 10 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 19 7月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-