These XMLs live in a separate directory, there's no need for them
to have a special prefix in addition. It also doesn't play nicely
with ':e' completion in Vim, finding proper file based on
qemuxml2argvtest.c is also needlessly complicated.

The files were renamed using the following commands. From
qemuxml2argvdata:

  for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done

and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:

  for i in $(find . -xtype l); do \
      ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
  done
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The vram attribute was introduced to set the video memory but it is
usable only for few hypervisors excluding QEMU/KVM and the old XEN
driver. Only in case of QEMU the vram was used for QXL.

This patch updates the documentation to reflect current code in libvirt
and also changes the cases when we will set the default vram attribute.
It also fixes existing strange default value for VGA devices 9MB to 16MB
because the video ram should be rounded to power of two.

The change of default value could affect migrations but I found out that
QEMU always round the video ram to power of two internally so it's safe
to change the default value to the next closest power of two and also
silently correct every domain XML definition. And it's also safe because
we don't pass the value to QEMU.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

There are no options to parse here other than the name of the device,
and all three possible device names have the same prefix
("virtio-balloon" with "-ccw", "-pci", or "-device" appended), so the
code is fairly simple. It has been implemented such that it will be
easier to add handling for other -device entries that aren't otherwise
recognized - just add another "else if (STRPREFIX(opts, ....)" clause.

qemuParseCommandLineString() previously would always add a <memballoon
model='virtio'/> to every result (the comments erroneously say that it
is adding a <memballoon model='none'/>) This has been changed to add
model='none', and 84 test case xml's updated accordingly (so that
qemuxml2argvtest won't fail).

Now that the memballoon device is properly parsed, we can safely add a
test for properly ignoring -nodefconfig and -nodefaults. Rather than
adding an entire new test case for this (and memballoon), we just
randomly pick the clock-utc test and modify it slightly to fulfill the
purpose.

There is no keyboard support currently in libvirt.

For some platforms (PPC64 QEMU) this makes graphics unusable,
since the keyboard is not implicit and it can't be added via libvirt.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

My commit 024e9af3 broke this.

<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.

Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.

Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.

Assume format type is 'auto' when none is specified on
qemu command line.

<vcpu> is not an optional node. The value for its 'placement'
actually always defaults to 'static' in the underlying codes.
(Even no 'cpuset' and 'placement' is specified, the domain
process will be pinned to all the available pCPUs).

Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.

* src/conf/domain_conf.h: Add new member "target" to struct
  _virDomainDeviceDriveAddress.

* src/conf/domain_conf.c: Parse and format "target"

* Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
  tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
  tests/vmx2xmldata/ are modified for newly introduced
  attribute "target" for address of "drive" type.

Some tools, such as virt-manager, prefers having the default USB
controller explicit in the XML document. This patch makes sure there
is one. With this patch, it is now possible to switch from USB1 to
USB2 from the release 0.9.1 of virt-manager.

Fix tests to pass with this change.

Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.

* docs/schemas/domain.rng: updated to allow the <listen> element

* docs/formatdomain.html.in: document the <listen> element and its
  attributes.

* src/conf/domain_conf.[hc]:

  1) The domain parser, formatter, and data structure are modified to
     support 0 or more <listen> subelements to each <graphics>
     element. The old style "legacy" listen attribute is also still
     accepted, and will be stored internally just as if it were a
     separate <listen> element. On output (i.e. format), the address
     attribute of the first <listen> element of type 'address' will be
     duplicated in the legacy "listen" attribute of the <graphic>
     element.

  2) The "listenAddr" attribute has been removed from the unions in
     virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
     This attribute is now in the <listen> subelement (aka
     virDomainGraphicsListenDef)

  3) Helper functions were written to provide simple access
     (both Get and Set) to the listen elements and their attributes.

* src/libvirt_private.syms: export the listen helper functions

* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
  src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c

  Modify all these files to use the listen helper functions rather
  than directly referencing the (now missing) listenAddr
  attribute. There can be multiple <listen> elements to a single
  <graphics>, but the drivers all currently only support one, so all
  replacements of direct access with a helper function indicate index
  "0".

* tests/* - only 3 of these are new files added explicitly to test the
  new <listen> element. All the others have been modified to reflect
  the fact that any legacy "listen" attributes passed in to the domain
  parse will be saved in a <listen> element (i.e. one of the
  virDomainGraphicsListenDefs), and during the domain format function,
  both the <listen> element as well as the legacy attributes will be
  output.

Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.

This extends the round up fix in 6002e040
to the whole codebase.

Instead of reporting errors for odd values in the VMX code round them up.

Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.

Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.

To allow compatibility with older QEMU PCI device slot assignment
it is necessary to explicitly track the balloon device in the
XML. This introduces a new device

   <memballoon model='virtio|xen'/>

It can also have a PCI address, auto-assigned if necessary.

The memballoon will be automatically added to all Xen and QEMU
guests by default.

* docs/schemas/domain.rng: Add <memballoon> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
  and formatting for memballoon device. Always add a memory
  balloon device to Xen/QEMU if none exists in XML
* src/libvirt_private.syms: Export memballoon model APIs
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
  PCI device address in memory balloon device
* tests/*: Update to test new functionality

Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
  method for populating disk controllers, and call it after
  parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
  when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
  data to all data files which don't have it already

When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.

* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
  for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
  generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
  to all XML files

	* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
	when starting guests if video card is present
	* tests/qemuhelptest.c: Change to use constants instead
	of hardcoded hex numbers, and add VGA support
	* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
	tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
	element for testing graphics adapter
	* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
	* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests