- 05 12月, 2017 1 次提交
-
-
由 Michal Privoznik 提交于
These XMLs live in a separate directory, there's no need for them to have a special prefix in addition. It also doesn't play nicely with ':e' completion in Vim, finding proper file based on qemuxml2argvtest.c is also needlessly complicated. The files were renamed using the following commands. From qemuxml2argvdata: for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done and then (to fix broken symlinks) from qemuxml2argvdata and qemuxml2xmloutdata: for i in $(find . -xtype l); do \ ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i; done Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 11 4月, 2017 1 次提交
-
-
由 Pavel Hrdina 提交于
Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 25 11月, 2014 1 次提交
-
-
由 Pavel Hrdina 提交于
The vram attribute was introduced to set the video memory but it is usable only for few hypervisors excluding QEMU/KVM and the old XEN driver. Only in case of QEMU the vram was used for QXL. This patch updates the documentation to reflect current code in libvirt and also changes the cases when we will set the default vram attribute. It also fixes existing strange default value for VGA devices 9MB to 16MB because the video ram should be rounded to power of two. The change of default value could affect migrations but I found out that QEMU always round the video ram to power of two internally so it's safe to change the default value to the next closest power of two and also silently correct every domain XML definition. And it's also safe because we don't pass the value to QEMU. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 23 6月, 2014 1 次提交
-
-
由 Laine Stump 提交于
There are no options to parse here other than the name of the device, and all three possible device names have the same prefix ("virtio-balloon" with "-ccw", "-pci", or "-device" appended), so the code is fairly simple. It has been implemented such that it will be easier to add handling for other -device entries that aren't otherwise recognized - just add another "else if (STRPREFIX(opts, ....)" clause. qemuParseCommandLineString() previously would always add a <memballoon model='virtio'/> to every result (the comments erroneously say that it is adding a <memballoon model='none'/>) This has been changed to add model='none', and 84 test case xml's updated accordingly (so that qemuxml2argvtest won't fail). Now that the memballoon device is properly parsed, we can safely add a test for properly ignoring -nodefconfig and -nodefaults. Rather than adding an entire new test case for this (and memballoon), we just randomly pick the clock-utc test and modify it slightly to fulfill the purpose.
-
- 19 2月, 2014 1 次提交
-
-
由 Li Zhang 提交于
There is no keyboard support currently in libvirt. For some platforms (PPC64 QEMU) this makes graphics unusable, since the keyboard is not implicit and it can't be added via libvirt. Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 29 4月, 2013 1 次提交
-
- 25 4月, 2013 2 次提交
-
-
由 Ján Tomko 提交于
<controller type='pci' index='0' model='pci-root'/> is auto-added to pc* machine types. Without this controller PCI bus 0 is not available and no PCI addresses are assigned by default. Since older libvirt supported PCI bus 0 even without this controller, it is removed from the XML when migrating.
-
由 Ján Tomko 提交于
Now we set the default disk driver name when parsing the qemu command line too, hence all the test changes. Assume format type is 'auto' when none is specified on qemu command line.
-
- 09 5月, 2012 1 次提交
-
-
由 Osier Yang 提交于
<vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs).
-
- 08 3月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
-
- 28 2月, 2012 1 次提交
-
-
由 Osier Yang 提交于
* src/conf/domain_conf.h: Add new member "target" to struct _virDomainDeviceDriveAddress. * src/conf/domain_conf.c: Parse and format "target" * Lots of tests (.xml) in tests/domainsnapshotxml2xmlout, tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and tests/vmx2xmldata/ are modified for newly introduced attribute "target" for address of "drive" type.
-
- 10 2月, 2012 1 次提交
-
-
由 Marc-André Lureau 提交于
Some tools, such as virt-manager, prefers having the default USB controller explicit in the XML document. This patch makes sure there is one. With this patch, it is now possible to switch from USB1 to USB2 from the release 0.9.1 of virt-manager. Fix tests to pass with this change.
-
- 29 1月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
Use it in all places where a memory or storage request size is converted to a larger granularity. This avoids requesting too small memory or storage sizes that could result from the truncation done by a simple division. This extends the round up fix in 6002e040 to the whole codebase. Instead of reporting errors for odd values in the VMX code round them up. Update the QEMU Argv tests accordingly as the original memory size 219200 isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change it to 219100 and 219136. Use two different values intentionally to make sure that rounding up works. Update virsh.pod accordingly, as rounding down and rejecting are replaced by rounding up.
-
- 21 7月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To allow compatibility with older QEMU PCI device slot assignment it is necessary to explicitly track the balloon device in the XML. This introduces a new device <memballoon model='virtio|xen'/> It can also have a PCI address, auto-assigned if necessary. The memballoon will be automatically added to all Xen and QEMU guests by default. * docs/schemas/domain.rng: Add <memballoon> element * src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and formatting for memballoon device. Always add a memory balloon device to Xen/QEMU if none exists in XML * src/libvirt_private.syms: Export memballoon model APIs * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the PCI device address in memory balloon device * tests/*: Update to test new functionality
-
- 18 1月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Existing applications using libvirt are not aware of the disk controller concept. Thus, after parsing the <disk> definitions in the XML, it is neccessary to create <controller> elements to satisfy all requested disks, as per their defined drive addresses * src/conf/domain_conf.c, src/conf/domain_conf.h, src/libvirt_private.syms: Add virDomainDefAddDiskControllers() method for populating disk controllers, and call it after parsing disk definitions. * src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers() when doing ARGV -> XML conversion * tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller data to all data files which don't have it already
-
- 16 1月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
When parsing the <disk> element specification, if no <address> is provided for the disk, then automatically assign one based on the <target dev='sdXX'/> device name. This provides for backwards compatability with existing applications using libvirt, while also allowing new apps to have complete fine grained control. * src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms: Add virDomainDiskDefAssignAddress() for assigning a controller/bus/unit address based on disk target * src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after generating XML from ARGV * tests/qemuxml2argvdata/*.xml: Add in drive address information to all XML files
-
- 08 7月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga when starting guests if video card is present * tests/qemuhelptest.c: Change to use constants instead of hardcoded hex numbers, and add VGA support * tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args, tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml, tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video> element for testing graphics adapter * tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag * tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
-
- 11 10月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 10 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 19 7月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-