* docs/schemas/domain.rng (qemucdevSrcDef): Restrict list of
supported <protocol type=> values.

I added a host definition to a network definition:

<network>
  <name>Lokal</name>
  <uuid>2074f379-b82c-423f-9ada-305d8088daaa</uuid>
  <bridge name='virbr1' stp='on' delay='0' />
  <ip address='192.168.180.1' netmask='255.255.255.0'>
    <dhcp>
      <range start='192.168.180.128' end='192.168.180.254' />
      <host mac='23:74:00:03:42:02' name='somevm' ip='192.168.180.10' />
    </dhcp>
  </ip>
</network>

But due to the wrong if-statement the argument --dhcp-hostsfile doesn't get
added to the dnsmasq command. The patch below fixes it for me.

The warning is bogus since strtok_r doesn't use the value when it's
first called and initializes it for the following calls.

When dynamic_ownership=0, saved images must be owned by the same uid
as is used to run the qemu process, otherwise restore won't work. To
accomplish this, qemuSecurityDACRestoreSavedStateLabel() needs to
simply return when it's called.

This fix is in response to:

  https://bugzilla.redhat.com/show_bug.cgi?id=661720

* docs/hacking.html.in (Curly braces): Tighten recommendations to
disallow if (cond) one-line; else { block; }.
* HACKING: Regenerate.
Suggested by Daniel P. Berrange.

Although the upper-layer code protected against it, it was possible to
call iptablesForwardMasquerade() with an IPv6 address and have it
attempt to add a rule to the MASQUERADE chain of ip6tables (which
doesn't exist).

This patch changes that function to check the protocol of the given
address, generate an error log if it's not IPv4 (AF_INET), and finally
hardcodes all the family parameters sent down to lower-level functions.

This is partially in response to

  https://bugzilla.redhat.com/show_bug.cgi?id=653300

The crash in that report was coincidentally fixed when we switched
from using inet_pton() to using virSocketParseAddr(), but the absence
of an ip address in a dhcp static host definition was still silently
ignored (and that entry discarded from the saved XML). This patch
turns that into a logged failure; likewise if the entry has neither a
mac address nor a name attribute (the entry is useless without at
least one of those, plus an ip address).

Since the network name is now pulled into this function in order for
those error logs to be more informative, the other error messages in
the function have also been changed to take advantage.

Also added explicit links to the subscription and
archive pages for the user and developer mailing
lists.

While doing some testing with Qemu and creating huge logfiles I encountered the case where the VM could not start anymore due to the lseek() to the end of the Qemu VM's log file failing. The patch below fixes the problem by replacing the previously used 'int' with 'off_t'.

To reproduce this error, you could do the following:

dd if=/dev/zero of=/var/log/libvirt/qemu/<name of VM>.log bs=1024 count=$((1024*2048))

and you should get an error like this:

error: Failed to start domain <name of VM>
error: Unable to seek to -2147482651 in /var/log/libvirt/qemu/<name of VM>.log: Success

* .gnulib: Update to latest, to pick up 2011 copyrights.

* configure.ac libvirt.spec.in docs/news.html.in: bump version and add
  documentation
* po/*po*: regenerate po and pot files

Detected on cygwin:
util/util.c: In function 'virSetUIDGID':
util/util.c:2824: warning: format '%d' expects type 'int', but argument 7 has type 'gid_t' [-Wformat]
(and three other lines)

* src/util/util.c (virSetUIDGID): Cast, as is done elsewhere in
this file, to avoid printf type mismatch warnings.

Don't require non-null jobdata to virThreadPoolSendJob().

The udev driver does not update a PCI device with its SR-IOV capabilities,
when applicable, the way the hal driver does.  As a result, dumping the
device's XML will not include the relevant physical or virtual function
information.

With this patch, the XML is correct:

# virsh nodedev-dumpxml pci_0000_09_00_0
<device>
  <name>pci_0000_09_00_0</name>
  <parent>pci_0000_00_1c_0</parent>
  <driver>
    <name>vxge</name>
  </driver>
  <capability type='pci'>
    <domain>0</domain>
    <bus>9</bus>
    <slot>0</slot>
    <function>0</function>
    <product id='0x5833'>X3100 Series 10 Gigabit Ethernet PCIe</product>
    <vendor id='0x17d5'>Neterion Inc.</vendor>
    <capability type='virt_functions'>
      <address domain='0x0000' bus='0x0a' slot='0x00' function='0x1'/>
      <address domain='0x0000' bus='0x0a' slot='0x00' function='0x2'/>
      <address domain='0x0000' bus='0x0a' slot='0x00' function='0x3'/>
    </capability>
  </capability>
</device>

# virsh nodedev-dumpxml pci_0000_0a_00_1
<device>
  <name>pci_0000_0a_00_1</name>
  <parent>pci_0000_00_1c_0</parent>
  <driver>
    <name>vxge</name>
  </driver>
  <capability type='pci'>
    <domain>0</domain>
    <bus>10</bus>
    <slot>0</slot>
    <function>1</function>
    <product id='0x5833'>X3100 Series 10 Gigabit Ethernet PCIe</product>
    <vendor id='0x17d5'>Neterion Inc.</vendor>
    <capability type='phys_function'>
      <address domain='0x0000' bus='0x09' slot='0x00' function='0x0'/>
    </capability>
  </capability>
</device>

Cc: Dave Allan <dallan@redhat.com>
Signed-off-by: NChris Wright <chrisw@redhat.com>

As pointed out in https://bugzilla.redhat.com/show_bug.cgi?id=659855#c9,
commit c3568ec2 introduced a regression where we no longer close any
fd's beyond FD_SETSIZE.

* src/util/util.c (__virExec): Continue to close fd's beyond
keepfd range.
Reported by Stefan Praszalowicz.

The original version of these functions would modify the address sent
in, meaning that the caller would usually need to copy the address
first. This change makes the original a const, and puts the resulting
masked address into a new arg (which could point to the same
virSocketAddr as the original, if the caller really wants to modify
it).

This also makes the API consistent with virSocketAddrBroadcast[ByPrefix].

Previously we used ioctl() to set the IP address and netmask of the
bridges used for virtual networks, and apparently the SIOCSIFNETMASK
ioctl implicitly set the broadcast address for the interface. The new
method of using the "ip" command requires broadcast address to be
explicitly specified though.

These functions work only for IPv4, becasue IPv6 doesn't have the same
concept of "broadcast address" as IPv4. They merely OR the inverse of
the netmask with the given host address, thus turning on all the host
bits.

Also include some whitespace changes. No functional change included.

Add vboxArrayGetWithUintArg to handle new signature variations. Also
refactor vboxArrayGet* implementation to use a common helper function.

Deal with the incompatible changes in the VirtualBox 4.0 API. This
includes major changes in virtual machine and storage medium lookup,
in RDP server property handling, in session/lock handling and other
minor areas.

VirtualBox 4.0 also dropped the old event API and replaced it with a
completely new one. This is not fixed yet and will be addressed in
another patch. Therefore, currently the domain events are supported
for VirtualBox 3.x only.

Based on initial work from Jean-Baptiste Rouault.

VIR_ERR_INVALID_DOMAIN is meant for invalid domain pointers.
VIR_ERR_NO_DOMAIN is meant for non-existing domains.

On Windows IID's are represented as GUID by value, instead of nsID
by reference on non-Windows platforms.

Patch the vbox_CAPI_v2_2.h header to deal with this difference.

Rewrite vboxIID abstraction that deals with the different IID
representations. Add support for the GUID representation. Also unify
the four context dependent free functions for vboxIIDs

  vboxIIDUnalloc, vboxIIDFree, vboxIIDUtf8Free, vboxIIDUtf16Free

into vboxIIDUnalloc that is now safe to be called (even multiple
times) on a vboxIID independent of the source and context of the
vboxIID.

The new vboxIID is designed to be used as a stack allocated variable.
It has a value member that represents the actual IID value.

Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>

When I build libvirt without libvirtd, I receive some errors:
cp: cannot stat `/home/wency/rpmbuild/BUILDROOT/libvirt-0.8.6-1.el6.x86_64/etc/libvirt/qemu/networks/default.xml': No such file or directory

My build step:
# ./autogen.sh --without-libvirtd
# make dist
# rpmbuild --nodeps --define "_sourcedir `pwd`" --define "_without_libvirtd 1" -ba libvirt.spec

The reason is we disable network when we do not build libvirt daemon in configure.ac.
After fixing this bug, I build libvirt without libvirtd, I receive other errors:
RPM build errors:
    Installed (but unpackaged) file(s) found:
   /usr/share/doc/libvirt-0.8.6/html/32favicon.png
   /usr/share/doc/libvirt-0.8.6/html/api.html
..
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_MIGRATE_QEMU_FD):
New enum value.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Populate
flags according to qemu version.
* tests/qemuhelptest.c (mymain): Adjust test.

A number of the libvirt APIs require the use of cgroups. This is not
enabled by default on a RHEL6 install. After discussion with cgroups
team, it was decided that upon installation of the libvirt RPM, we
should automatically turn on the cgroups service. This will activate a
default configuration that turns on all cgroups controllers libvirt
requires for full operation.

This patch fixes https://bugzilla.redhat.com/show_bug.cgi?id=664406

If qemu is run as a different uid, it has been unable to access mode
0660 files that are owned by a different user, but with a group that
the qemu is a member of (aside from the one group listed in the passwd
file), because initgroups() is not being called prior to the
exec. initgroups will change the group membership of the process (and
its children) to match the new uid.

To make this happen, the setregid()/setreuid() code in
qemuSecurityDACSetProcessLabel has been replaced with a call to
virSetUIDGID(), which does both of those, plus calls initgroups.

Similar, but not identical, code in qemudOpenAsUID() has been replaced
with virSetUIDGID(). This not only consolidates the functionality to a
single location, but also potentially fixes some as-yet unreported
bugs.

virSetUIDGID() sets both the real and effective group and user of the
process, and additionally calls initgroups() to assure that the
process joins all the auxiliary groups that the given uid is a member
of.

There are cases when we want log an error message, and possibly free
some memory as part of the cleanup, while still preserving errno for a
caller, but the functions that log errors, and virFree (VIR_FREE) make
system calls that will clear errno. This patch preserves errno during
those most basic functions (corresponding to virReportSystemError(),
virReportOOMError(), networkReportError(), etc, as well as
virStrError()). It does *not preserve errno across calls to higher
level items such as virDispatchError(), as it's assumed the caller is
all finished with any need for errno by the time it dispatches the
error.

Running an instance of the router advertisement daemon (radvd) allows
guests using the virtual network to automatically acquire an IPv6
address and default route. Note that acquiring an address only works
for networks with a prefix length of exactly 64 - radvd is still run
in other circumstances, and still advertises routes, but autoconf will
not work because it requires exactly 64 bits of address info from the
network prefix.

This patch avoids a race condition with the pidfile by manually
daemonizing radvd rather than allowing it to daemonize itself, then
creating our own pidfile (in addition to radvd's own file, which is
unnecessary, but there is no way to tell radvd to not create it). This
is accomplished by exec'ing it with "--debug 1" in the commandline,
and using virCommand's features to fork, create a pidfile, and detach
from the newly forked process.

At this point everything is already in place to make IPv6 happen, we just
need to add a few rules, remove some checks for IPv4-only, and document
the changes to the XML on the website.

All of the iptables functions eventually call down to a single
bottom-level function, and fortunately, ip6tables syntax (for all the
args that we use) is identical to iptables format (except the
addresses), so all we need to do is:

1) Get an address family down to the lowest level function in each
   case, either implied through an address, or explicitly when no
   address is in the parameter list, and

2) At the lowest level, just decide whether to call "iptables" or
   "ip6tables" based on the family.

The location of the ip6tables binary is determined at build time by
autoconf. If a particular target system happens to not have ip6tables
installed, any attempts to run it will generate an error, but that
won't happen unless someone tries to define an IPv6 address for a
network. This is identical behavior to IPv4 addresses and iptables.

This patch reorganizes the code in bridge_driver.c to account for the
concept of a single network with multiple IP addresses, without adding
in the extra variable of IPv6. A small bit of code has been
temporarily added that checks all given addresses to verify they are
IPv4 - this will be removed when full IPv6 support is turned on.

This commit adds support for IPv6 parsing and formatting to the
virtual network XML parser, including moving around data definitions
to allow for multiple <ip> elements on a single network, but only
changes the consumers of this API to accommodate for the changes in
API/structure, not to add any actual IPv6 functionality. That will
come in a later patch - this patch attempts to maintain the same final
functionality in both drivers that use the network XML parser - vbox
and "bridge" (the Linux bridge-based driver used by the qemu
hypervisor driver).

* src/libvirt_private.syms: Add new private API functions.
* src/conf/network_conf.[ch]: Change C data structure and
  parsing/formatting.
* src/network/bridge_driver.c: Update to use new parser/formatter.
* src/vbox/vbox_tmpl.c: update to use new parser/formatter
* docs/schemas/network.rng: changes to the schema -
  * there can now be more than one <ip> element.
  * ip address is now an ip-addr (ipv4 or ipv6) rather than ipv4-addr
  * new optional "prefix" attribute that can be used in place of "netmask"
  * new optional "family" attribute - "ipv4" or "ipv6"
    (will default to ipv4)
  * define data types for the above
* tests/networkxml2xml(in|out)/nat-network.xml: add multiple <ip> elements
  (including IPv6) to a single network definition to verify they are being
  correctly parsed and formatted.

In practice this has always been optional, but the RNG has shown it as
mandatory, and since all the examples for make check had it, it was
never noticed. One of the existing test cases has been changed to
check for this.

I also noticed that the dhcp/host/ip was still defined as <text/>,
but should really be <ref name='ipv4-addr'/>

brSetInetAddress can only set a single IP address on the bridge, and
uses a method (ioctl(SIOCSETIFADDR)) that only works for IPv4. Replace
it and brSetInetNetmask with a single function that uses the external
"ip addr add" command to add an address/prefix to the interface - this
supports IPv6, and allows adding multiple addresses to the interface.

Although it isn't currently used in the code, we also add a
brDelInetAddress for completeness' sake.

Also, while we're modifying bridge.c, we change brSetForwardDelay and
brSetEnableSTP to use the new virCommand API rather than the
deprecated virRun, and also log an error message in bridge_driver.c if
either of those fail (previously the failure would be completely
silent).

When a netmask isn't specified for an IPv4 address, one can be implied
based on what network class range the address is in. The
virNetworkDefPrefix function does this for us, so netmask isn't
required.

IPv6 will use prefix exclusively, and IPv4 will also optionally be
able to use it, and the iptables functions really need a prefix
anyway, so use the new virNetworkDefPrefix() function to send prefixes
into iptables functions instead of netmasks.

Also, in a couple places where a netmask is actually needed, use the
new private API function for it rather than getting it directly. This
will allow for cases where no netmask or prefix is specified (it
returns the default for the current class of network.)