This patch pushes the isolatedPort setting from the <interface> down
all the way to the callers of virNetDevBridgeAddPort(), and sets
BR_ISOLATED on the port (using virNetDevBridgePortSetIsolated()) after
the port has been successfully added to the bridge.
Signed-off-by: NLaine Stump <laine@redhat.com>
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Similar to the way that the <vlan>, <bandwidth>, and <virtualport>
elements and the trustGuestRxFilters attribute in a <network> (or in
the appropriate <portgroup> element of a <network> can be applied to a
port when it is allocated for a domain's network interface, this patch
checks for a configured value of <port isolated="yes|no"/> in
either the domain <interface> or in the network, setting isolatedPort
in the <networkport> to the first one it finds (the setting from the
domain's <interface> is preferred). This, in turn, is passed back to
the domain when a port is allocated, so that the domain will use that
setting.

(One difference from <vlan>, <bandwidth>, <virtualport>, and
trustGuestRxFilters, is that all of those can be set in a <portgroup>
so that they can be applied only to a subset of interfaces connected
to the network. This didn't really make sense for the isolated setting
due to the way that it's implemented in Linux - the BR_ISOLATED flag
will prevent traffic from passing between two ports that both have
BR_ISOLATED set, but traffic can still go between those ports and
other ports that *don't* have BR_ISOLATED. (It would be nice if all
traffic from a BR_ISOLATED port could be blocked except traffic going
to/from a designated egress port or ports, but instead the entire
feature is implemented as a single flag. Because of this, it's really
only useful if all the ports on a network are isolated, so setting it
for a subset has no practical utility.)
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This is a very simple thing to parse and format, but needs to be done
in 4 places, so two trivial utility functions have been made that can
be called from all the higher level parser/formatters:

  <domain><interface>
  <domain><interface><actual> (only in domain status)
  <network>
  <networkport>
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When this flag is set for an interface attached to a bridge, traffic
to/from the specified interface can only enter/exit the bridge via
another attached interface that *doesn't* have the BR_ISOLATED flag
set. This can be used to permit guests to communicate with the rest of
the network, but not with each other.
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Not only was the original error code destroyed in the case of
encountering an error during recovery from a failed attach to the
bridge (and then *that* error was destroyed by logging a *second*
error about the failure to recover - virNetDevBridgeAddPort() already
logs an error, so the one about failing to recover was redundant), but
if the recovery was successful, the function would then return success
to the caller even though it had failed.

Fixes: 2711ac87
(overwritten errors were introduced along with this functionality)
Fixes: 6bde0a1a
(the wrong return value was introduced by a refactor)
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This is in the data structure and the parse/format functions, and is
getting passed all around correctly, it just was omitted from the RNG,
which hasn't been noticed because no human is creating <networkport>
XML, and so it's never getting validated against the schema.
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We specify "true" as the fail-action for LIBVIRT_CHECK_PKG.

This was used when we had a fallback to non-pkg-config detection,
then removed in commit 5bdcef13
later re-introduced in commit dc3d2c9f
and then left in when removing the old detection again in
commit 18981877

Remove it to properly error out when libxl was requested but not
detected.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Fixes: 18981877Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Firstly, the check for disk I/O error can be moved into 'if
(!offline)' section a few lines below.
Secondly, checks for vmstate and slirp should be moved under the
same section because they reflect live state of a domain. For
offline migration no QEMU is involved and thus these restrictions
are not valid.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In two places where virPidFileForceCleanupPath() is called, we
try to unlink() the pidfile again. This is needless because
virPidFileForceCleanupPath() has done just that.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The virPidFileReadPath() function is supposed to return 0 on
success or a negative value on failure. But the negative value
has a special meaning - it's negated errno. Therefore, when
converting string to int we shouldn't return -1 which translates
to EPERM. Returning EINVAL looks closer to the truth.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There's nothing to clean up. Make it obvious what is returned.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Extract the code that directly deals with storage. This allows further
simplification and clarification of virStorageFileGetMetadataRecurse.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Replacing virHashLookup by virHashHasEntry allows us to use NULL as the
payload of the hash table rather than putting a fake '1' pointer into
the table.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

The path can be NULL e.g. for NBD disks. Use NULLSTR to prevent use of
NULL in %s.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Move the assignment to a place where we know that the backing store is
present rather than having to check in the cleanup section.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

We call virStorageFileSupportsBackingChainTraversal which already checks
that the 'storageFileRead' callback is non-NULL, which in turn means
that virStorageFileRead will not return -2.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Probing by file suffix was meant to be a last resort if probing by
contents fails or is not supported. For most formats we never specified
any suffix. There's a few formats implementing both magic bytes and
suffix and finally DMG which had only suffix probing. Since suffix
probing is nowhere reliable and only one format depends on in which has a
comment that qemu doesn't do the probing either drop the whole
infrastructure.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

In commit v5.9.0-400-gaf8e3992 I removed printing model's fallback and
vendor_id attributes when no model is specified. However, vendor_id
makes sense even without a specific CPU model (for host-model CPUs).

https://bugzilla.redhat.com/show_bug.cgi?id=1804549Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This patch shows a bug in our code: the

    <model vendor_id="Libvirt QEMU"/>

element present in the source XML is lost when the parsed CPU definition
is formatted back to XML.

https://bugzilla.redhat.com/show_bug.cgi?id=1804549Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

qemuMonitorGetIOThreads returns a NULL-terminated list even when 0
iothreads are present. The caller didn't perform cleanup if there were 0
iothreads leaking the array.

https://bugzilla.redhat.com/show_bug.cgi?id=1804548

Fixes: d1eac927Reported-by: NJing Yan <jiyan@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Relevant code seems to treat forward modes 'route', 'nat', 'open' and 'none'
the same but documentation hasn't reflected that so far.
Signed-off-by: NPavel Mores <pmores@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

To fix the actual bug, it was necessary to make networkPlugBandwidth() be
called also for 'bridge'-type networks implemented using macvtap's 'bridge'
mode (previously it was only called for those implemented on top of an
existing bridge).

However, it seems beneficial to call it for other network types as well, at
least because it removes an inconsistency in types of bandwidth configuration
changes permissible in inactive and active domain configs.  It should also be
safe as the function pretty much amounts to NOP if no QoS is requested and the
new behaviour should not be any worse than before if it is.
Signed-off-by: NPavel Mores <pmores@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Even if an interface of type 'network', setting 'floor' is only supported
if the network's forward type is nat, route, open or none.
Signed-off-by: NPavel Mores <pmores@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

QoS 'floor' setting is documented to be only supported for interfaces of
type 'network'.  Fail with an error message on attempt to set 'floor' on
an interface of any other type.
Signed-off-by: NPavel Mores <pmores@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This compound condition will be useful in several places so it
makes sense to give it a name for better readability.
Signed-off-by: NPavel Mores <pmores@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

If the parsed 'raw' format JSON string has 'offset' or 'size' attributes
parse them as the format slice.

https://bugzilla.redhat.com/show_bug.cgi?id=1791788Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Implement support for the slice of type 'storage' which allows to set
the offset and size which modifies where qemu should look for the start
of the format container inside the image.

Since slicing is done using the 'raw' driver we need to add another
layer into the blockdev tree if there's any non-raw image format driver
used to access the data.

This patch adds the blockdev integration and setup of the image data so
that we can use the slices for any backing image.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add a set of test data to see whether the backing store strings are
formatted reasonably. Note that we don't support direct creation of such
images so those tests are not enabled.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When creating overlay images e.g. for snapshots or when merging
snapshots we often specify the backing store string to use. Make the
formatter aware of backing chain entries which have a <slice>
configured so that we record it properly. Otherwise such images
would not work without the XML (when detecting the backing chain).
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The storage slice will require a specific node name in cases when the
image format is not raw. Store and format them in the status XML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Implement parsing and formatting of the 'storage' slice.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We are going to add support for specifying offset and size attributes
which will allow controling where the image and where the guest data
itself starts in the source of the disk. This will be represented by
a <slices> element filled with either a <slice type='storage'> for the
offset of the image format data.

Add the XML documentation and RNG schema.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Specifically creating such images via libvirt during blockjobs would
be much more hassle than it's worth. Just forbid them for now.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We support explicit storage slices only when using blockdev. Storage
slices expressed via the backing store string are left to qemu to
open correctly.

Reject storage slices configured via the XML for non-blockdev usage.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If we have a 'format' type slice for a raw driver we can directly format
the values.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce virStorageSourceSlice which will store the 'offset' and 'size'
of a virStorageSource and declare it as 'sliceStorage' and 'sliceFormat'
attributes of a virStorageSource.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

QEMU allows specifying the offset and size into a raw file to expose a
sub-slice of the image to the guest with the raw driver. Libvirt
currently doesn't support it but we can add test case for future
reference.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>