Use g_autoptr instead.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Return 0 on success to match the documentation. The callers only check
for negative values.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In some cases we don't want to log errors if an agent command is
unsupported. Wire it up into qemuAgentCheckError via qemuAgentCommandFull
and provide a thin wrapper (qemuAgentCommand) to prevent having to fix
all callers.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The agent 'guest-sync' command historically had a 5s response timeout
which was different from other agent commands, which waited forever.
When we added the ability to customize the response timeout for guest
agent commands, we intended to continue to use 5s for 'guest-sync' when
the user specified a response timeout greater than 5s, and use the
user-specified timeout if it was below 5s. Unfortunately, when
attempting to determine whether the user-specified timeout was less than
5s, we were comparing against an enum value of
VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT (which is -1) rather than against
the actual time value that it represented (5).

This change makes it so that 'guest-sync' now uses the user-specified
tiemout if it is less than 5s.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NSeeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

A fixup to patch [1]. We need to reset await_event in all
error paths.

[1] 52532073 : qemu: remove redundant needReply argument of qemuAgentCommand
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

'nfs' variable was set to -1 or -2 on agent failure. Cleanup then tried
to free 'nfs' elements of the array which resulted into a crash.

Make 'nfs' size_t and assign it only on successful agent call.

https://bugzilla.redhat.com/show_bug.cgi?id=1812965

Broken by commit 599ae372Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

needReply added in [1] looks redundant. Indeed it is set to false only
when mon->await_event is set too (the only exception qemuAgentFSTrim
which is mistaken).

However it fixes the issue when qemuAgentCommand exits on error path and
mon->await_event is not reset. Let's instead reset mon->await_event properly.

Also remove "Woken up by event" debug message as it can be misleading.
We can get it also if monitor is closed due to serial changed event
currently. Anyway both qemuAgentClose and qemuAgentNotifyEvent log
itself.

[1] qemu: make sure agent returns error when required data are missing
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Sync was introduced in [1] to check for ga presence. This
check is racy but in the era before serial events are available
there was not better solution I guess.

In case we have the events the sync function is different. It allows us
to flush stateless ga channel from remnants of previous communications.
But we need to do it only once. Until we get timeout on issued command
channel state is ok.

[1] qemu_agent: Issue guest-sync prior to every command
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This converts the QEMU agent APIs to use the per-VM
event loop, which involves switching from virEvent APIs
to GMainContext / GSource APIs.

A GSocket is used as a convenient way to create a GSource
for a socket, but is not yet used for actual I/O.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

We are dealing with the QEMU agent, not the monitor.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Libvirt has never configured the QEMU agent to support
running on a PTY implicitly. In theory an end user may
have written such an XML config, but this is reasonably
unlikely since when a bare <channel> is provided, libvirt
will auto-expand it to a UNIX socket backend.

With this change a user who has use the PTY backend will
have to switch to the UNIX backend if they wish to use
libvirt APIs for interacting with the agent. This will
not have guest ABI impact.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Make it obvious that the function always returns a valid pointer and fix
all callers.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Use the glib allocation function that never returns NULL and remove the
now dead-code checks from all callers.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There are a large number of different header files that
are related to the sockets APIs. The virsocket.h header
includes all of the relevant headers for Windows and UNIX
in one convenient place. If virsocketaddr.h is already
included, then there's no need for virsocket.h
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Switch from old VIR_ allocation APIs to glib equivalents.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

In order to avoid holding an agent job and a normal job at the same
time, we want to avoid accessing the domain's definition while holding
the agent job. To achieve this, qemuAgentGetFSInfo() only returns the
raw information from the agent query to the caller. The caller can then
release the agent job and then proceed to look up the disk alias from
the vm definition. This necessitates moving a few helper functions to
qemu_driver.c and exposing the agent data structure (qemuAgentFSInfo) in
the header.

In addition, because the agent function no longer returns the looked-up
disk alias, we can't test the alias within qemuagenttest.  Instead we
simply test that we parse and return the raw agent data correctly.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The qemuAgentDiskInfo structure is filled with information received from
the agent command response, except for the 'alias' field, which is
retrieved from the vm definition. Limit this structure only to data that
was received from the agent message.

This is another intermediate step in moving the responsibility for
searching the vmdef from qemu_agent.c to qemu_driver.c so that we can
avoid holding an agent job and a normal job at the same time.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

In an effort to avoid holding both an agent and normal job at the same
time, we shouldn't access the vm definition from within qemu_agent.c
(i.e. while the agent job is being held). In preparation, we need to
store the full filesystem disk information in qemuAgentDiskInfo.  In a
following commit, we can pass this information back to the caller and
the caller can search the vm definition to match the filsystem disk to
an alias.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The function name doesn't give a good idea of what the function does.
Rename to qemuAgentGetFSInfoFillDisks() to make it more obvious than it
is filling in the disk information in the fsinfo struct.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Glib implementation follows the ISO C99 standard so it's safe to replace
the gnulib implementation.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.

This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.

One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').

Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds,  this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Replace all occurrences of
  if (VIR_STRDUP(a, b) < 0)
     /* effectively dead code */
with:
  a = g_strdup(b);
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Since commit 44e7f029
    util: rewrite auto cleanup macros to use glib's equivalent

VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Prefer the GLib version of the macro.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Prefer G_GNUC_NULL_TERMINATED which was introduced in GLib 2.8.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Replace use of the gnulib base64 module with glib's own base64 API family.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Coverity noted that 'reply' can be NULL after calling
qemuAgentCommand().  Avoid dereferencing reply in
qemuAgentErrorComandUnsupported() in that case.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

On error paths, info_ret could potentially leak. Make sure it's freed.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

When we're collecting guest information, older agents may not support
all agent commands. In the case where the user requested all info
types (i.e. types == 0), ignore unsupported command errors and gather as
much information as possible. If the agent command failed for some other
reason, or if the user explciitly requested a specific info type (i.e.
types != 0), abort on the first error.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This function adds the complete filesystem information returned by the
qemu agent to an array of typed parameters with field names intended to
to be returned by virDomainGetGuestInfo()
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Since version 3.0, qemu has returned disk usage statistics in
guest-get-fsinfo. And since 3.1, it has returned information about the
disk serial number and device node of disks that are targeted by the
filesystem.

Unfortunately, the public API virDomainGetFSInfo() returns the
filesystem info using a virDomainFSInfo struct, and due to API/ABI
guarantees it cannot be extended. So this new information cannot
easily be added to the public API. However, it is possible to add this
new filesystem information to a new virDomainGetGuestInfo() API which
will be based on typed parameters and is thus more extensible.

In order to support these two use cases, I added an internal struct
which the agent code uses to return all of the new data fields. This
internal struct can be converted to the public struct at a cost of some
extra memory allocation.

In a following commit, this additional information will be used within
virDomainGetGuestInfo().
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This function queries timezone information within the guest and adds
the information to an array of typed parameters with field names
intended to be returned to virDomainGetGuestInfo()
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This function queries the guest operating system information and adds
the returned information to an array of typed parameters with field
names intended to be returned in virDomainGetGuestInfo().
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>