Add a test for the simple parts of my indentation changes, and
fix the fallout.

* tests/domainsnapshotxml2xmltest.c: New test.
* tests/Makefile.am (domainsnapshotxml2xmltest_SOURCES): Build it.
* src/conf/domain_conf.c (virDomainSnapshotDefFormat): Avoid NULL
deref, match documented order.
* src/conf/domain_conf.h (virDomainSnapshotDefFormat): Add const.
* tests/domainsnapshotxml2xmlout/all_parameters.xml: Tweak output.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Likewise.
* tests/domainsnapshotxml2xmlout/full_domain.xml: Likewise.
* .gitignore: Exempt new binary.

Rather than having to adjust all callers in a chain to deal with
indentation, it is nicer to have virBuffer do auto-indentation.

* src/util/buf.h (_virBuffer): Increase size.
(virBufferAdjustIndent, virBufferGetIndent): New prototypes.
* src/libvirt_private.syms (buf.h): Export new functions.
* src/util/buf.c (virBufferAdjustIndent, virBufferGetIndent): New
functions.
(virBufferSetError, virBufferAdd, virBufferAddChar)
(virBufferVasprintf, virBufferStrcat, virBufferURIEncodeString):
Implement auto-indentation.
* tests/virbuftest.c (testBufAutoIndent): Test it.
(testBufInfiniteLoop): Don't rely on internals.
Idea by Daniel P. Berrange.

I had some temporary test failures while working on virbuf
improvements in later patches, with output that looked like:

Expected [<]
Actual [  <]

which is pretty hard to figure out.  Adding an Offset designation
made it much easier to find which particular '<' was at the
wrong indentation, to fix the right part of the code.

* tests/testutils.c (virtTestDifference): Make it easier to
diagnose test failures.

Add test cases for parsing the qemu-name-space.
This is based on qemuxml2argv{test,data/}, but can not reside in
qemuxml2argv{test,data/} because ...

1. qemuxmlns-qemu-ns-domain.xml is not schema-valid and breaks
domainschematest. The test is still important to detect xmlns:qemu
bindings to a name-space other than
http://libvirt.org/schemas/domain/qemu/1.0

2. they break qemuxml2xml, because the xmlns:qemu binding is moved to
the top-level <domain> element when converting from argv to xml.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

Tested with multiple AHCI controllers and multiple disks attached
to a controller. E.g.,

    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk0.raw'/>
      <target dev='sda' bus='sata'/>
      <address type='drive' controller='0' bus='0' unit='0'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk1.raw'/>
      <target dev='sdb' bus='sata'/>
      <address type='drive' controller='0' bus='0' unit='1'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk2.raw'/>
      <target dev='sdc' bus='sata'/>
      <address type='drive' controller='1' bus='0' unit='0'/>
    </disk>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
    </controller>
    <controller type='sata' index='1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
    </controller>

virInitialize() → xenRegister() → xenhypervisorInit() determines the
version of the Hypervisor. This breaks xencapstest when building as root
on a dom0 system, since xenHypervisorBuildCapabilities() adds the "hap"
and "viridian" features based on the detected version.

Add an optional parameter to xenhypervisorInit() to disable automatic
detection of the Hypervisor version. The passed in arguments are used
instead.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

to escape the netcat command since it's passed to the shell. Adjust
expected test case output accordingly.

Based on a patch by Marc Deslauriers <marc.deslauriers@ubuntu.com>

RH: https://bugzilla.redhat.com/show_bug.cgi?id=562176
Ubuntu: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/517478
Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=573172

AM_TESTS has support for skipping tests, while the C-implementation
virtTestRun() does not support that feature.

Print "_" or "SKIP" in verbose mode for tests returning EXIT_AM_SKIP=77.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

VirtFS allows the user to choose between path/handle based fs driver.
As of now, libvirt hardcoded path based driver only. This patch provides
a solution to allow user to choose between path/handle based fs driver.

Sample:

    <filesystem type='mount'>
      <driver type='handle'/>
      <source dir='/folder/to/share1'/>
      <target dir='mount_tag1'/>
    </filesystem>

    <filesystem type='mount'>
      <driver type='path'/>
      <source dir='/folder/to/share2'/>
      <target dir='mount_tag2'/>
    </filesystem>
Signed-off-by: NHarsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Building on Linux with dtrace enabled was failing 'make check':

  CCLD   nodeinfotest
../src/.libs/libvirt_test.a(libvirt_net_rpc_client_la-virnetclient.o): In function `virNetClientNew':
/home/remote/eblake/libvirt/src/rpc/virnetclient.c:162: undefined reference to `libvirt_rpc_client_new_semaphore'

On looking further, I see some earlier warnings emitted from libtool:

*** Warning: Linking the shared library libvirt.la against the non-libtool
*** objects  probes.o is not portable!

Since src/probes.o is only built on Linux, and even then, only when
dtrace is enabled, this failure does not affect other platforms, and
despite libtool warning that it is not generally portable, it is not
a problem for our use-case in libvirt.la.  But it turns out that while
libtool is willing to jam raw .o files into an installed shared
library (libvirt.la becomes libvirt.so), it is NOT willing to jam
the same .o file into the convenience library libvirt_test.la.
Perhaps this is a bug in libtool, but even if we get libtool fixed,
libvirt must continue to build on platforms with older libtool.  So,
the fix is the same as we are already using for the libvirt_lxc
executable - don't rely on the .o file being in the convenience
library, but instead use LDADD to pull it in directly.

* tests/Makefile.am (PROBES_O): New macro.
(LDADDS): Use it to fix link errors.

On xen 4.1 I observed configurations that look like:

(image
    (hvm
        (kernel '')
        (loader '/foo/bar')
))

The kernel element is there but unset. This leads to an empty <kernel/>
element in the XML and even worse makes us skip the boot order parsing
and therefore not emit a <boot device='$dev>'/> element which breaks CD
booting.

Previously libvirt's disk device XML only had a single attribute,
error_policy, to control both read and write error policy, but qemu
has separate options for controlling read and write. In one case
(enospc) a policy is allowed for write errors but not read errors.

This patch adds a separate attribute that sets only the read error
policy. If just error_policy is set, it will apply to both read and
write error policy (previous behavior), but if the new rerror_policy
attribute is set, it will override error_policy for read errors only.
Possible values for rerror_policy are "stop", "report", and "ignore"
("report" is the qemu-controlled default for rerror_policy when
error_policy isn't specified).

For consistency, the value "report" has been added to the possible
values for error_policy as well.

commit 12062abb set rerror=ignore when error_policy="enospace" was
selected (since the rerror option in qemu doesn't accept "enospc", as
the werror option does).

After that patch was already pushed, Paolo Bonzini noticed it and
commented that leaving rerror at the default ("report") would be a
better choice. This patch corrects the problem - if error_policy =
"enospace" is given, rerror is left off the qemu commandline,
effectively setting it to "report". For other values, rerror is still
set to match werror.

Additionally, the parsing of error_policy was changed to no longer
erroneously allow "default" as a choice - as with most other
attributes, if you want the default setting, just don't specify an
error_policy.

Finally, two ommissions in the first patch were corrected - a
long-dormant qemuxml2argv test for enospace was enabled, and fixed to
pass, and the argv2xml parser in qemu_command.c was updated to
recognize the different spelling on the qemu commandline.

Now that RHEL 6.2 Beta is out, it would be nice to test multifunction
devices on that platform.  This changes things so that the multifunction
cap bit can be set in two different ways: by version comparison (needed
for qemu 0.13 which lacked a -device query), and by -device query
(provided by qemu.git and backported to the RHEL beta build of
qemu-kvm which still claims to be a modified 0.12, and therefore needed
for RHEL).

* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Allow
second method of setting multifunction cap bit.
* tests/qemuhelptest.c (mymain): Test it.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device: Likewise.

When support for was added for PCI multifunction cards (in commit
9f8baf, first included in libvirt 0.9.3), it was done by always
turning on the multifunction bit for all PCI devices. Since that time
it has been realized that this is not an ideal solution, and that the
multifunction bit must be selectively turned on. For example, see

  https://bugzilla.redhat.com/show_bug.cgi?id=728174

and the discussion before and after

  https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html

This patch modifies multifunction support so that the multifunction=on
option is only added to the qemu commandline for a device if its PCI
<address> definition has the attribute "multifunction='on'", e.g.:

  <address type='pci' domain='0x0000' bus='0x00'
           slot='0x04' function='0x0' multifunction='on'/>

In practice, the multifunction bit should only be turned on if
function='0' AND other functions will be used in the same slot - it
usually isn't needed for functions 1-7 (although there are apparently
some exceptions, e.g. the Intel X53 according to the QEMU source
code), and should never be set if only function 0 will be used in the
slot. The test cases have been changed accordingly to illustrate.

With this patch in place, if a user attempts to assign multiple
functions in a slot without setting the multifunction bit for function
0, libvirt will issue an error when the domain is defined, and the
define operation will fail. In the future, we may decide to detect
this situation and automatically add multifunction=on to avoid the
error; even then it will still be useful to have a manual method of
turning on multifunction since, as stated above, there are some
devices that excpect it to be turned on for all functions in a slot.

A side effect of this patch is that attempts to use the same PCI
address for two different devices will now log an error (previously
this would cause the domain define operation to fail, but there would
be no log message generated). Because the function doing this log was
almost completely rewritten, I didn't think it worthwhile to make a
separate patch for that fix (the entire patch would immediately be
obsoleted).

Syslog puts the timestamp to every message anyway so this removes
redundant data.

The AppArmor security driver adds only the path specified in the domain
XML for character devices of type 'pipe'. It should be using <path>.in
and <path>.out. We do this by creating a new vah_add_file_chardev() and
use it for char devices instead of vah_add_file(). Also adjust
valid_path() to accept S_FIFO (since qemu chardevs of type 'pipe' use
fifos). This is https://launchpad.net/bugs/832507

This patch was made in response to:

  https://bugzilla.redhat.com/show_bug.cgi?id=738095

In short, qemu's default for the rombar setting (which makes the
firmware ROM of a PCI device visible/not on the guest) was previously
0 (not visible), but they recently changed the default to 1
(visible). Unfortunately, there are some PCI devices that fail in the
guest when rombar is 1, so the setting must be exposed in libvirt to
prevent a regression in behavior (it will still require explicitly
setting <rom bar='off'/> in the guest XML).

rombar is forced on/off by adding:

  <rom bar='on|off'/>

inside a <hostdev> element that defines a PCI device. It is currently
ignored for all other types of devices.

At the moment there is no clean method to determine whether or not the
rombar option is supported by QEMU - this patch uses the advice of a
QEMU developer to assume support for qemu-0.12+. There is currently a
patch in the works to put this information in the output of "qemu-kvm
-device pci-assign,?", but of course if we switch to keying off that,
we would lose support for setting rombar on all the versions of qemu
between 0.12 and whatever version gets that patch.

QEMU 0.13 introduced cache=unsafe for -drive, this patch exposes
it in the libvirt layer.

  * Introduced a new QEMU capability flag ($prefix_CACHE_UNSAFE),
    as even if $prefix_CACHE_V2 is set, we can't know if unsafe
    is supported.

  * Improved the reliability of qemu cache type detection.

Prior to commit 85d28108, we had an issue where:

snapshot-create-as dom name --diskspec spec --diskspec spec

failed to parse the second spec, because the first spec had marked
that option as no longer requiring an argument.

In commit 85d28108, I fixed it by making argv options no longer mark
the option as seen.  But this in turn breaks mandatory argv options,
which now complain that the argv option is missing.

This patch reverts that part of 85d28108, and instead replaces it with
fixes to no longer clear opts_need_arg of an argv argument.

* tools/virsh.c (vshCmddefGetOption, vshCmddefGetData)
(vshCommandParse): Fix option parsing for required argv option.
(vshCmddefOptParse): Check that argv option is last.
* tests/virsh-optparse: Enhance test.

  * qemuhelptest prints test case name on failure.

The commit that prevents disk corruption on domain shutdown
(96fc4784) causes regression with QEMU
0.14.* and 0.15.* because of a regression bug in QEMU that was fixed
only recently in QEMU git. The affected versions of QEMU do not quit on
SIGTERM if started with -no-shutdown, which we use to implement fake
reboot. Since -no-shutdown tells QEMU not to quit automatically on guest
shutdown, domains started using the affected QEMU cannot be shutdown
properly and stay in a paused state.

This patch disables fake reboot feature on such QEMU by not using
-no-shutdown, which makes shutdown work as expected. However,
virDomainReboot will not work in this case and it will report "Requested
operation is not valid: Reboot is not supported with this QEMU binary".

When libvirt calls virInitialize it creates a thread local
for the virErrorPtr storage, and registers a callback to
cleanup memory when a thread exits. When libvirt is dlclose()d
or otherwise made non-resident, the callback function is
removed from memory, but the thread local may still exist
and if a thread later exists, it will invoke the callback
and SEGV. There may also be other thread locals with callbacks
pointing to libvirt code, so it is in general never safe to
unload libvirt.so from memory once initialized.

To allow dlclose() to succeed, but keep libvirt.so resident
in memory, link with '-z nodelete'. This issue was first
found with the libvirt CIM provider, but can potentially
hit many of the dynamic language bindings which all ultimately
involve dlopen() in some way, either on libvirt.so itself,
or on the glue code for the binding which in turns links
to libvirt

* configure.ac, src/Makefile.am: Ensure libvirt.so is linked
  with -z nodelete
* cfg.mk, .gitignore, tests/Makefile.am, tests/shunloadhelper.c,
  tests/shunloadtest.c: A test case to unload libvirt while
  a thread is still running.

With this patch, it is hopefully a bit more obvious that for
snapshot-create-as, a literal '--diskspec' is mandatory if name
or description was omitted, but optional if all earlier options
were provided.

These all denote two diskspecs and a description:
virsh snapshot-create-as dom name desc vda vdb
virsh snapshot-create-as dom name desc --diskspec vda --diskspec vdb
virsh snapshot-create-as dom name desc --diskspec vda vdb
virsh snapshot-create-as dom name desc vda --diskspec vdb
virsh snapshot-create-as dom --diskspec vda --diskspec vdb name desc

This gives two diskspecs but no description:
virsh snapshot-create-as dom name --diskspec vda --diskspec vdb

And this treats 'vda' as the description, with only one diskspec:
virsh snapshot-create-as dom name vda vdb

The help output now shows:
    snapshot-create-as <domain> [<name>] [<description>] [--print-xml] [--no-metadata] [--halt] [--disk-only] [[--diskspec] <string>]...

I also checked the help output for echo and send-key, which are two
other variants of argv commands.

* tools/virsh.pod (snapshot-create-as): Document when a literal
--diskspec must preceed a diskspec argument.
* tools/virsh.c (vshCmddefHelp): Update help output for argv when
naming the option is useful.
(vshCmddefGetData): Fix logic on when argv was seen.
* tests/virsh-optparse: Add tests to avoid regressions.

* tests/virnettlscontexttest: fix memory leak on virnettlscontext test case.

* Detected in valgrind run:

==25667==
==25667== 86,651 (34,680 direct, 51,971 indirect) bytes in 10 blocks are
definitely lost in loss record 350 of 351
==25667==    at 0x4005447: calloc (vg_replace_malloc.c:467)
==25667==    by 0x4F1F515D: gnutls_init (gnutls_state.c:270)
==25667==    by 0x8053432: virNetTLSSessionNew (virnettlscontext.c:1181)
==25667==    by 0x804DD24: testTLSSessionInit (virnettlscontexttest.c:624)
==25667==    by 0x804F14D: virtTestRun (testutils.c:140)
==25667==
==25667== 100,578 (38,148 direct, 62,430 indirect) bytes in 11 blocks are
definitely lost in loss record 351 of 351
==25667==    at 0x4005447: calloc (vg_replace_malloc.c:467)
==25667==    by 0x4F1F515D: gnutls_init (gnutls_state.c:270)
==25667==    by 0x8053432: virNetTLSSessionNew (virnettlscontext.c:1181)
==25667==    by 0x804DD3C: testTLSSessionInit (virnettlscontexttest.c:625)
==25667==    by 0x804F14D: virtTestRun (testutils.c:140)

* How to reproduce?
% cd libvirt && ./configure && make && make -C tests valgrind
or
% valgrind -v --leak-check=full ./tests/virnettlscontexttest
Signed-off-by: NAlex Jia <ajia@redhat.com>

It is important to be able to attach USB redirected devices to a
particular controller (one that supports USB2 for instance).
Without this patch, only the default bus was used.

     <redirdev bus='usb' type='spicevmc'>
       <address type='usb' bus='0' port='4'/>
     </redirdev>

Expose the disk-only flag through virsh.  Additionally, make
virsh snapshot-create-as take an arbitrary number of diskspecs,
which can be used to build up the xml for <domainsnapshot>.

* tools/virsh.c (cmdSnapshotCreate): Add --disk-only.
(cmdSnapshotCreateAs): Likewise, and add argv diskspec.
(vshParseSnapshotDiskspec): New helper function.
(vshCmddefGetOption): Allow naming of argv field.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
them.
* tests/virsh-optparse: Test snapshot-create-as parsing.

I got confused when 'virsh domblkinfo dom disk' required the
path to a disk (which can be ambiguous, since a single file
can back multiple disks), rather than the unambiguous target
device name that I was using in disk snapshots.  So, in true
developer fashion, I went for the best of both worlds - all
interfaces that operate on a disk (aka block) now accept
either the target name or the unambiguous path to the backing
file used by the disk.

* src/conf/domain_conf.h (virDomainDiskIndexByName): Add
parameter.
(virDomainDiskPathByName): New prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow
searching by path, and decide whether ambiguity is okay.
(virDomainDiskPathByName): New function.
(virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainBlockPeek)
(qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig)
(qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise.
* src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath):
Likewise.
* src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive)
(libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig)
(libxlDomainUpdateDeviceConfig): Likewise.
* src/uml/uml_driver.c (umlDomainBlockPeek): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise.
* docs/formatsnapshot.html.in: Update documentation.
* tools/virsh.pod (domblkstat, domblkinfo): Likewise.
* docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on
disk targets.
* docs/schemas/domainsnapshot.rng (disksnapshot): Update to match.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.

Adds an optional element to <domainsnapshot>, which will be used
to give user control over external snapshot filenames on input,
and specify generated filenames on output.

For now, no driver accepts this element; that will come later.

<domainsnapshot>
  ...
  <disks>
    <disk name='vda' snapshot='no'/>
    <disk name='vdb' snapshot='internal'/>
    <disk name='vdc' snapshot='external'>
      <driver type='qcow2'/>
      <source file='/path/to/new'/>
    </disk>
  </disks>
  <domain>
    ...
    <devices>
      <disk ...>
        <driver name='qemu' type='raw'/>
        <target dev='vdc'/>
        <source file='/path/to/old'/>
      </disk>
    </devices>
  </domain>
</domainsnapshot>

* src/conf/domain_conf.h (_virDomainSnapshotDiskDef): New type.
(_virDomainSnapshotDef): Add new elements.
(virDomainSnapshotAlignDisks): New prototype.
* src/conf/domain_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, disksorter)
(virDomainSnapshotAlignDisks): New functions.
(virDomainSnapshotDefParseString): Parse new fields.
(virDomainSnapshotDefFree): Clean them up.
(virDomainSnapshotDefFormat): Output them.
* src/libvirt_private.syms (domain_conf.h): Export new function.
* docs/schemas/domainsnapshot.rng (domainsnapshot, disksnapshot):
Add more xml.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: New test.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Update.

In order to distinguish disk snapshots from system checkpoints, a
new state value that is only valid for snapshots is helpful.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_LAST): New placeholder.
* src/conf/domain_conf.h (virDomainSnapshotState): New enum mapping.
(VIR_DOMAIN_DISK_SNAPSHOT): New internal enum value.
* src/conf/domain_conf.c (virDomainState): Use placeholder.
(virDomainSnapshotState): Extend mapping by one for use in snapshot.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Handle new state.
(virDomainObjSetState, virDomainStateReasonToString)
(virDomainStateReasonFromString): Avoid compiler warnings.
* tools/virsh.c (vshDomainState, vshDomainStateReasonToString):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new functions.
* docs/schemas/domainsnapshot.rng: Tighten state definition.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: New test.

As discussed here:
https://www.redhat.com/archives/libvir-list/2011-August/msg00361.html
https://www.redhat.com/archives/libvir-list/2011-August/msg00552.html

Adds snapshot attribute and transient sub-element:

<devices>
  <disk type=... snapshot='no|internal|external'>
    ...
    <transient/>
  </disk>
</devices>

* docs/schemas/domaincommon.rng (snapshot): New define.
(disk): Add snapshot and persistent attributes.
* docs/formatdomain.html.in: Document them.
* src/conf/domain_conf.h (virDomainDiskSnapshot): New enum.
(_virDomainDiskDef): New fields.
* tests/qemuxml2argvdata/qemuxml2argv-disk-transient.xml: New
test of rng, no args counterpart until qemu support is complete.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.args: New
file, snapshot attribute does not affect args.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.xml: Likewise.
* tests/qemuxml2argvtest.c (mymain): Run new test.

Fix qemuAssignDevicePCISlots() and the associated regression tests

This patch will probably cause merge conflicts to those trying
to do backports.  The end goal is simple - domaincommon.rng
should be the state of domain.rng pre-patch, with a few lines
tweaked in the header, while domain.rng post-patch is now just
a shell that includes domaincommon.rng and sets the <start>.

* docs/schemas/domain.rng: Move guts...
* docs/schemas/domaincommon.rng: ...to new file.
* docs/schemas/domainsnapshot.rng: Allow new xml.
* docs/schemas/Makefile.am (schema_DATA): Distribute new file.
* tests/domainsnapshotxml2xmlout/full_domain.xml: New test.
* libvirt.spec.in (%files client): Ship new file.  Sort lines.
* mingw32-libvirt.spec.in: Likewise.

- create a new "redirdev" element for this purpose

QEMU uses USB bus name "usb.0" when using the legacy -usb argument.
If we want to allow USB devices to specify their addresses with legacy
-usb, we should either in case of legacy bus name drop the 0 from the
address bus, or just drop the 0 from device id. This patch does the
later.

Another solution would be to permit addressing on non-legacy USB
controllers only.

So that devices can be attached to hubs. Example, to attach to first
port of a usb-hub on port 1.

      <hub type='usb'>
         <address type='usb' bus='0' port='1'/>
      </hub>

      <input type='mouse' type='usb'>
         <address type='usb' bus='0' port='1.1'/>
      </hub>

also add a test entry